2. Computers & electronics
  3. Computer components
  4. System components
  5. Server/workstation motherboards
  6. Tyan
  7. S5630

Tyan S5630 User manual

  • Hello! I am an AI chatbot trained to assist you with the Tyan S5630 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
http://www.tyan.com
1
S5630
Version 1.0b
Copyright
Copyright © 2017 MiTAC International Corporation. All rights reserved. No part of
this manual may be reproduced or translated without prior written consent from
MiTAC International Corporation.
Trademark
All registered and unregistered trademarks and company names contained in this
manual are property of their respective owners including, but not limited to the
following.
TYAN
®
is a trademark of MiTAC International Corporation.
Intel
®
is a trademark of Intel
®
Corporation.
AMI, AMI BIOS are trademarks of AMI Technologies.
Microsoft
®
, Windows
®
are trademarks of Microsoft Corporation.
Winbond
®
is a trademark of Winbond Electronics Corporation.
Notice
Information contained in this document is furnished by MiTAC International
Corporation and has been reviewed for accuracy and reliability prior to printing.
MiTAC assumes no liability whatsoever, and disclaims any express or implied
warranty, relating to sale and/or use of TYAN
®
products including liability or
warranties relating to fitness for a particular purpose or merchantability. MiTAC
retains the right to make changes to product descriptions and/or specifications at
any time, without notice. In no event will MiTAC be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.
http://www.tyan.com
2
Contents
S5630 ............................................................................................................ 1
Before you begin… .................................................................................... 3
Chapter 1: Instruction ................................................................................ 4
1.1 Congratulations ................................................................................. 4
1.2 Hardware Specifications .................................................................... 4
1.3 Software Specifications ................................................................... 13
Chapter 2: Board Installation ................................................................... 14
2.1 Board Image .................................................................................... 15
2.2 Block Diagram ................................................................................. 16
2.3 Motherboard Mechanical Drawing ................................................... 17
2.4 Board Parts, Jumpers and Connectors ........................................... 18
2.5 LED Definitions ................................................................................ 28
2.6 Installing the Processor and Heatsink ............................................. 30
2.7 Thermal Interface Material............................................................... 33
2.8 Tips on Installing Motherboard in Chassis ...................................... 34
2.9 Installing the Memory ...................................................................... 36
2.10 Attaching Drive Cables .................................................................. 40
2.11 Installing Add-In Cards .................................................................. 41
2.12 Connecting External Devices ........................................................ 42
2.13 Installing the Power Supply ........................................................... 43
2.14 Finishing Up ................................................................................... 43
Chapter 3: BIOS Setup ............................................................................. 44
3.1 About the BIOS ................................................................................ 44
3.2 Main Menu ....................................................................................... 46
3.3 Advanced Menu ............................................................................... 48
3.4 Platform Configuration ..................................................................... 77
5.5 Socket Configuration ....................................................................... 89
5.6 Server Management ...................................................................... 116
5.7 Security .......................................................................................... 121
5.8 Boot ............................................................................................... 126
5.9 Save & Exit .................................................................................... 129
Chapter 4: Diagnostics ........................................................................... 131
4.1 Flash Utility .................................................................................... 131
4.2 AMIBIOS Post Code (Aptio) .......................................................... 132
Appendix I: How to recover UEFI BIOS ................................................ 139
Appendix II: Fan and Temp Sensors .................................................... 141
Glossary ................................................................................................... 145
Technical Support .................................................................................. 151
http://www.tyan.com
3
Before you begin…
Check the box contents!
The retail motherboard package should contain the following:
S5630 Motherboard x 1
SATA Single Cable x 2
Rear IO shielding x 3
1 x S5630 Quick Installation Guide
1 x TYAN
®
Driver CD
M.2 Screw kit x2
IMPORTANT NOTE:
Sales samples may not come with any of the accessories listed above.
If you have ordered a sales sample and you are missing any of the above items,
please contact your sales representative to help order accessories.
http://www.tyan.com
4
Chapter 1: Instruction
1.1 Congratulations
You have purchased the powerful TYAN
®
S5630 motherboard, based on the Intel
®
C621/C622 chipset. The S5630 is designed to support Intel
®
Xeon
®
Scalable family
series Processor, and Up to 384GB RDIMM/ 768GB LRDIMM/ 1,536GB RDIMM
3DS/LRDIMM 3DS DDR4 2666 MHz memory. Leveraging advanced technology
from Intel
®
, the S5630 is capable of offering scalable 32 and 64-bit computing, high-
bandwidth memory design, and lightning-fast PCI-E bus implementation.
The S5630 not only empowers you in today’s demanding IT environment but also
offers a smooth path for future application upgradeability. All of these rich feature
sets provide the S5630 with the power and flexibility to meet demanding
requirements for today’s IT environments.
Remember to visit the TYAN
®
website at http://www.tyan.com. There you can find
all the information on all TYAN
®
products as well as all the supporting documentation,
FAQs, Drivers and BIOS upgrades.
1.2 Hardware Specifications
S5630GMR Specifications
Processor
Socket Type / Q'ty
Supported CPU
Series
Thermal Design
Power (TDP)
wattage
Chipset
PCH
Intel C621
Memory
Supported DIMM
Qty
(12) DIMM slots
DIMM Type /
Speed
DDR4 RDIMM/RDIMM
3DS/LRDIMM/LRDIMM 3DS 2666
Capacity
Up to 384GB RDIMM/ 768GB
LRDIMM/ 1,536GB RDIMM
3DS/LRDIMM 3DS *Follow latest
Intel DDR4 Memory POR
Memory channel
6 Channels
Memory voltage
1.2V
http://www.tyan.com
5
Expansion Slots
PCI-E
(1) PCI-E Gen3 x16 slot
Others:
(1) PCI-E Gen3 x8 OCP 2.0 slots
(con.A+con.B)
LAN
Port Q'ty
(1) PHY
PHY
Realtek RTL8211E
Storage
SATA
Connector
(2) Mini-SAS HD (8-
ports)
Controller
Intel C621
Speed
6.0 Gb/s
RAID
RAID 0/1/10/5 (Intel
RSTe)
sSATA
Connector
(2) 8-pin SATA/SATA-
DOM, (1) Mini-SAS
HD (4-ports)
Controller
Intel C621
Speed
6.0 Gb/s
RAID
RAID 0/1/10/5 (Intel
RSTe)
Graphic
Connector type
D-Sub 15-pin
Resolution
Up to 1920x1200
Chipset
Aspeed AST2500
Input /Output
USB
(5) USB3.0 ports (2 at rear, 2 via
cable, Type-A)
COM
(1) DB-9 COM Connector (at
rear, COM1) + (1) Header
(COM2)
VGA
(1) D-Sub 15-pin VGA port (at
rear)
RJ-45
(1) GbE port dedicated for IPMI
Audio
Line-in, Line-out, Mic-in,
Surround, Side surround,
CEN/LFE at rear
Front Panel
(1) 2x12-pin SSI front panel
header
SATA
(2) 8-pin SATA/SATA-DOM
connectors + (3) Mini-SAS HD
(4-in-1) connectors
http://www.tyan.com
6
Power
ATX 24-pin + 8-pin power
connectors
Others
(1) ID button
TPM (Optional)
TPM Support
Please refer to our TPM
supported list.
System Monitoring
Chipset
Aspeed AST2500
Fan
Total (6) 4-pin headers
Temperature
Monitors temperature for CPU
& memory & system
environment
Voltage
Monitors voltage for CPU,
memory, chipset & power
supply
LED
Over temperature warning
indicator, Fan & PSU fail LED
indicator
Others
Watchdog timer support
Server Management
Onboard Chipset
Onboard Aspeed AST2500
AST2500 iKVM
Feature
IPMI 2.0 compliant baseboard
management controller (BMC),
Supports storage over IP and
remote platform-flash, USB 2.0
virtual hub
AST2500 IPMI
Feature
24-bit high quality video
compression, 10/100/1000 Mb/s
MAC interface
BIOS
Brand / ROM size
AMI, 32MB
Feature
Hardware Monitor, SMBIOS
3.0/PnP/Wake on LAN, Boot
from USB device/PXE via
LAN/Storage, User Configurable
FAN PWM Duty Cycle, Console
Redirection, ACPI sleeping
states S4,S5, ACPI 6.1
Physical Dimension
Form Factor
SSI CEB
Board Dimension
12"x10.9" (305x276.86mm)
Regulation
FCC (DoC)
Class A
CE (DoC)
Yes
http://www.tyan.com
7
Operating Environment
Operating Temp.
10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158°
F)
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6 Compliant
Yes
Operating System
OS supported list
Please refer to our AVL
support lists.
Package Contains
Motherboard
(1) S5630 Motherboard
Manual
(1) Web User's manual, (1)
Quick Installation Guide
Installation CD
(1) TYAN installation CD
S5630GMRE Specifications
Processor
Socket Type / Q'ty
Supported CPU
Series
Thermal Design
Power (TDP)
wattage
Chipset
PCH
Intel C621
Memory
Supported DIMM
Qty
(12) DIMM slots
DIMM Type /
Speed
DDR4 RDIMM/RDIMM
3DS/LRDIMM/LRDIMM 3DS 2666
Capacity
Up to 384GB RDIMM/ 768GB
LRDIMM/ 1,536GB RDIMM
3DS/LRDIMM 3DS *Follow latest
Intel DDR4 Memory POR
Memory channel
6 Channels
Memory voltage
1.2V
Expansion Slots
PCI-E
(1) PCI-E Gen3 x16 slot
Others:
(1) PCI-E Gen3 x8 OCP 2.0 slots
http://www.tyan.com
8
(con.A+con.B)
LAN
Port Q'ty
(1) PHY
PHY
Realtek RTL8211E
Storage
SATA
Connector
(2) Mini-SAS HD (8-
ports)
Controller
Intel C621
Speed
6.0 Gb/s
RAID
RAID 0/1/10/5 (Intel
RSTe)
NVMe
(2) PCI-E x8 SFF-
8611 OCuLink
connectors for (4)
NVMe ports
sSATA
Connector
(2) 8-pin
SATA/SATA-DOM,
(1) Mini-SAS HD (4-
ports)
Controller
Intel C621
Speed
6.0 Gb/s
RAID
RAID 0/1/10/5 (Intel
RSTe)
Graphic
Connector type
D-Sub 15-pin
Resolution
Up to 1920x1200
Chipset
Aspeed AST2500
Input /Output
USB
(5) USB3.0 ports (2 at rear, 2 via
cable, Type-A)
COM
(1) DB-9 COM Connector (at
rear, COM1) + (1) Header
(COM2)
VGA
(1) D-Sub 15-pin VGA port (at
rear)
RJ-45
(1) GbE port dedicated for IPMI
Audio
Line-in, Line-out, Mic-in,
Surround, Side surround,
CEN/LFE at rear
Front Panel
(1) 2x12-pin SSI front panel
header
http://www.tyan.com
9
SATA
(2) 8-pin SATA/SATA-DOM
connectors + (3) Mini-SAS HD
(4-in-1) connectors
Power
ATX 24-pin + 8-pin power
connectors
Others
(1) ID button
TPM (Optional)
TPM Support
Please refer to our TPM
supported list.
System Monitoring
Chipset
Aspeed AST2500
Fan
Total (6) 4-pin headers
Temperature
Monitors temperature for CPU
& memory & system
environment
Voltage
Monitors voltage for CPU,
memory, chipset & power
supply
LED
Over temperature warning
indicator, Fan & PSU fail LED
indicator
Others
Watchdog timer support
Server Management
Onboard Chipset
Onboard Aspeed AST2500
AST2500 iKVM
Feature
IPMI 2.0 compliant baseboard
management controller (BMC),
Supports storage over IP and
remote platform-flash, USB 2.0
virtual hub
AST2500 IPMI
Feature
24-bit high quality video
compression, 10/100/1000 Mb/s
MAC interface
BIOS
Brand / ROM size
AMI, 32MB
Feature
Hardware Monitor, SMBIOS
3.0/PnP/Wake on LAN, Boot
from USB device/PXE via
LAN/Storage, User Configurable
FAN PWM Duty Cycle, Console
Redirection, ACPI sleeping
states S4,S5, ACPI 6.1
Physical Dimension
Form Factor
SSI CEB
http://www.tyan.com
10
Board Dimension
12"x10.9" (305x276.86mm)
Regulation
FCC (DoC)
Class A
CE (DoC)
Yes
Operating Environment
Operating Temp.
10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158°
F)
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6 Compliant
Yes
Operating System
OS supported list
Please refer to our AVL
support lists.
Package Contains
Motherboard
(1) S5630 Motherboard
Manual
(1) Web User's manual, (1)
Quick Installation Guide
Installation CD
(1) TYAN installation CD
S5630GMRE-L2 Specifications
Processor
Socket Type / Q'ty
Supported CPU
Series
Thermal Design
Power (TDP)
wattage
Chipset
PCH
Intel C622
Memory
Supported DIMM
Qty
(12) DIMM slots
DIMM Type /
Speed
DDR4 RDIMM/RDIMM
3DS/LRDIMM/LRDIMM 3DS 2666
Capacity
Up to 384GB RDIMM/ 768GB
LRDIMM/ 1,536GB RDIMM
3DS/LRDIMM 3DS *Follow latest
Intel DDR4 Memory POR
Memory channel
6 Channels
Memory voltage
1.2V
http://www.tyan.com
11
Expansion Slots
PCI-E
(1) PCI-E Gen3 x16 slot
Others:
(1) PCI-E Gen3 x8 OCP slot, (1)
KR 10GbE Card connector
LAN
Port Q'ty
(1) PHY
PHY
Realtek RTL8211E
Storage
SATA
Connector
(2) Mini-SAS HD (8-
ports)
Controller
Intel C622
Speed
6.0 Gb/s
RAID
RAID 0/1/10/5 (Intel
RSTe)
NVMe
(2) PCI-E x8 SFF-
8611 OCuLink
connectors for (4)
NVMe ports
sSATA
Connector
(2) 8-pin
SATA/SATA-DOM,
(1) Mini-SAS HD (4-
ports)
Controller
Intel C622
Speed
6.0 Gb/s
RAID
RAID 0/1/10/5 (Intel
RSTe)
Graphic
Connector type
D-Sub 15-pin
Resolution
Up to 1920x1200
Chipset
Aspeed AST2500
Input /Output
USB
(5) USB3.0 ports (2 at rear, 2 via
cable, Type-A)
COM
(1) DB-9 COM Connector (at
rear, COM1) + (1) Header
(COM2)
VGA
(1) D-Sub 15-pin VGA port (at
rear)
RJ-45
(1) GbE port dedicated for IPMI
Audio
Line-in, Line-out, Mic-in,
Surround, Side surround,
CEN/LFE at rear
http://www.tyan.com
12
Front Panel
(1) 2x12-pin SSI front panel
header
SATA
(2) 8-pin SATA/SATA-DOM
connectors + (3) Mini-SAS HD
(4-in-1) connectors
Power
ATX 24-pin + 8-pin power
connectors
Others
(1) ID button
TPM (Optional)
TPM Support
Please refer to our TPM
supported list.
System Monitoring
Chipset
Aspeed AST2500
Fan
Total (6) 4-pin headers
Temperature
Monitors temperature for CPU
& memory & system
environment
Voltage
Monitors voltage for CPU,
memory, chipset & power
supply
LED
Over temperature warning
indicator, Fan & PSU fail LED
indicator
Others
Watchdog timer support
Server Management
Onboard Chipset
Onboard Aspeed AST2500
AST2500 iKVM
Feature
IPMI 2.0 compliant baseboard
management controller (BMC),
Supports storage over IP and
remote platform-flash, USB 2.0
virtual hub
AST2500 IPMI
Feature
24-bit high quality video
compression, 10/100/1000 Mb/s
MAC interface
BIOS
Brand / ROM size
AMI, 32MB
Feature
Hardware Monitor, SMBIOS
3.0/PnP/Wake on LAN, Boot
from USB device/PXE via
LAN/Storage, User Configurable
FAN PWM Duty Cycle, Console
Redirection, ACPI sleeping
states S4,S5, ACPI 6.1
http://www.tyan.com
13
Physical Dimension
Form Factor
SSI CEB
Board Dimension
12"x10.9" (305x276.86mm)
Regulation
FCC (DoC)
Class A
CE (DoC)
Yes
Operating Environment
Operating Temp.
10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158°
F)
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6 Compliant
Yes
Operating System
OS supported list
Please refer to our AVL
support lists.
Package Contains
Motherboard
(1) S5630 Motherboard
Manual
(1) Web User's manual, (1)
Quick Installation Guide
Installation CD
(1) TYAN installation CD
1.3 Software Specifications
For the latest AST2500 User’s Guide and OS (operation system) support, please
visit the Tyan’s Web site at http://www.tyan.com for the latest information
http://www.tyan.com
14
Chapter 2: Board Installation
You are now ready to install your motherboard.
How to install our products right… the first time
The first thing you should do is read this user’s manual. It contains important
information that will make configuration and setup much easier. Here are some
precautions you should take when installing your motherboard:
(1) Ground yourself properly before removing your motherboard from the
antistatic bag. Unplug the power from your computer power supply and
then touch a safely grounded object to release static charge (i.e. power
supply case). For the safest conditions, MiTAC recommends wearing a
static safety wrist strap.
(2) Hold the motherboard by its edges and do not touch the bottom of the
board, or flex the board in any way.
(3) Avoid touching the motherboard components, IC chips, connectors,
memory modules, and leads.
(4) Place the motherboard on a grounded antistatic surface or on the antistatic
bag that the board was shipped in.
(5) Inspect the board for damage.
The following pages include details on how to install your motherboard into your
chassis, as well as installing the processor, memory, disk drives and cables.
Caution!
1. To avoid damaging the motherboard and associated
components, do not use torque force greater than
5~7kgf/cm (4.35~6.09 lb/in) on each mounting screw
for motherboard installation.
2. Do not apply power to the board if it has been
damaged.
http://www.tyan.com
15
2.1 Board Image
S5630GM2NR
This picture is representative of the latest board revision available at the time of
publishing. The board you receive may not look exactly like the above picture.
http://www.tyan.com
16
2.2 Block Diagram
S5630 Block Diagram
http://www.tyan.com
17
2.3 Motherboard Mechanical Drawing
http://www.tyan.com
18
2.4 Board Parts, Jumpers and Connectors
This diagram is representative of the latest board revision available at the time of
publishing. The board you receive may not look exactly like the above diagram. The
DIMM slot numbers shown above can be used as a reference when reviewing the
DIMM population guidelines shown later in the manual. For the latest board revision,
please visit our web site at http://www.tyan.com.
http://www.tyan.com
19
Motherboard Components
Connectors
1. Rear ID LED Button (IDLED_BTN1)
18. SATA DOM Connector (SATA 3.0 signals)
7Pin+2Power (SATADOM1)
2. VGA+ COM PORT (VGA_COM1)
19. Mini SAS HD Connector (sSATA 0_3)
3. RJ45+USB3.0 x 2 (USB3_IPMI_LAN1)
20. SATA DOM Power (DOM_PWR2)
4. 80P OCULINK Connector (J21)
21. SATA DOM Power (DOM_PWR1)
5.Reset Button (RST_BTN1)
22. 4-pin FAN Connector (SYS_FAN_4)
6. 80P OCULINK Connector (J20)
23. 4-pin FAN Connector (SYS_FAN_3)
7. IPMB Connector (IPMB_HD1)
24. 8-pin Power Connector (PW2)
8. COM2 Header (COM2)
25. Mini SAS HD Connector (SATA 4_7)
9. System FAN Connector (J29)
26. Mini SAS HD Connector (SATA 0_3)
10. Front Panel Connector (FPIO_1)
27. 4-pin FAN Connector (SYS_FAN_2)
11. TYAN Module Header (DBG_HD1)
28. 4-pin FAN Connector (CPU_FAN)
12. SGPIO Header (SSATA_SGPIO1)
29. 4-pin FAN Connector (SYS_FAN_1)
13. Clear Button (CLEAR_BTN1)
30. PSMI Connector (PSIMI1)
14. VROC Header (J51)
31. 24-pin Power Connector (PW1)
15. SATA DOM Connector(SATA 3.0 signals)
7Pin+2Power (SATADOM2)
32. 4-pin FAN Connector (SYS_FAN_5)
16. Vertical Type A USB Connector
(TYPEA_USB1)
33. 4-pin FAN Connector (SYS_FAN_6)
17. FPB USB2.0/USB3.0 *2 Header
(USB3_FPIO1)
34. VR VDDQ PMBUS (J1)
Jumpers/ Headers
a. NVDIA GPU Card Select Jumper (3PHD8)
f. LPC /Espi Select Jumper (3PHD5)
b. PSU Throttling Function Jumper (3PHD9)
g. Chassis Intrusion Header (INTRUDER_HD1)
c. LPC /Espi Select Jumper (3PHD4)
h. ME Recover Jumper (3PHD3)
d. BMC COM2/COM5 Select Jumper (3PHD6)
i. ME Debug Header (3PHD2)
e. BMC COM2/COM5 Select Jumper (3PHD7)
j. PCH IE Debug Header (3PHD1)
k. CPU VR SCLK/SDAT Header (J10)
PCIE Slots
A. OCP B Slot (J37)
C. OCP A Slot (J36)
B. OCP C Slot (J27)
D. OCP A Slot (OCP1_B)
LEDs
I PSU Alert LED (PSU_LED1
VI BMC Heartbeat LED (BMC_LED1)
II ERROR_ LED (ERR_LED1)
VII PWR_GOOD_LED (PCH_PWOK_LED1)
III CPU_ERROR LED (CAT_LED1)
VIII On board BMC IPMI ALERT LED
(IPMI_LED1)
IV ID LED (ID_LED1)
IX CPU0 Power LED (P0_PG_LED1)
V SYS_RESET_ LED (SYS_RST_LED1)
http://www.tyan.com
20
ID LED_BTN1: Rear IDLED Button
Signal
Pin
Pin
Signal
IDLED_SW#
1
2
GND
IPMB_HD1: IPMB Connector
Signal
Pin
Pin
Signal
BMC_SMB_DATA
1
2
GND
BMC_SMB_CLK
3
4
VCC
COM2: COM2 Header
Signal
Pin
Pin
Signal
DCD
1
2
DSR
RXD
3
4
RTS
TXD
5
6
CTS
DTR
7
8
RI
GND
9
10
KEY
J29: System FAN Connector
Signal
Pin
Pin
Signal
TACH1
1
2
TACH6
TACH2
3
4
TACH7
TACH3
5
6
TACH8
TACH4
7
8
TACH9
TACH5
9
10
TACH10
GND
11
12
KEY
PWM2
13
14
PWM1
TACH11
15
16
SMB_DATA
TACH12
17
18
SMB_CLK
NC
19
20
PWM3
INTRUDER_HD1: Chassis Intrusion Header
Signal
Pin
Pin
Signal
PCH_INTRUDER_N
1
2
GND
/