Special Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s).
They will not match your particular table/desk base and woods screws will be required to be screwed
directly into the underside of the top.
Tools Required: Power screwdriver.
INSTALLATION GUIDE
San Fran System
Executive L-Shaped
Oce Desk
Size: 1600mm
Page 1 of 5
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Leg x6
Adjustable Foot x6
Leg Cable Cover x6
Rail 1090mm x2
Rail 950mm x1
Rail 120mm x2
Rail 90mm x1
1 Way Connector x1
2 Way Connector x5
Connector Cap x6
Rail Space Bracket x4
Slot Nut x4
Joiner plate x2
Big Table Top x1
Small Table Top x1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
M8x12mm Dome Head x12
M8x20mm Cap Head x7
M5x20mm Self Tapping x12
M8x20mm Dome Head x4
16
17
18
19
COMPONENTS
SCREWS
Page 2 of 5
INSTALLATION GUIDE
San Fran System
Executive L-Shaped
Oce Desk
Size: 1600mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
14
6
8
15
4
7
3
1
2
9
10
5
13
16
17
12
11
19
01
Page 3 of 5
INSTALLATION GUIDE
San Fran System
Executive L-Shaped
Oce Desk
Size: 1600mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Loosely connect the longer M8x20mm dome head bolt and slot nut through the
rail spacer bracket. Slide onto 1090mm rails and fully tighten in place.
Securely connect legs to 1090mm and 120mm rails lenghts
using the shorter M8x20mm dome head bolts.
02
Slide the 2 way connectors over each leg, and securely lock into place using
M8x20mm cap head bolts.
03
Ensure the worksurface is centered over the frame. Fully tighten all M5x20mm self
tapping screws through each leg and rail space bracket into the worksurface.
04
INSTALLATION GUIDE
San Fran System
Executive L-Shaped
Oce Desk
Size: 1600mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
To assemble the return, join a 2 way connector with a 1 way connector.
Use the 900mm rail and 90mm rail to form the L shape as illustrated
above. Introduce two rail space brackets.
Flip again the structure, and bring both tables together, as shown in the picture.
05
07
Page 4 of 5
With the help of a second person, flip the return structure and join it to the Small
Table Top positioned on the ground. Fully tighten all M5x20mm self tapping
screws through each leg and rail space bracket into the worksurface.
Attach the return structure to the main desk by screwing the tables
through Joiner plates. Finally, secure the table by inserting the
missing screw of the indicated Rail Space Bracket.
08
06
Page 5 of 5
Conceal any power cable using
the magnetic leg cable covers.
09
INSTALLATION GUIDE
San Fran System
Executive L-Shaped
Oce Desk
Size: 1600mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
/
