VIA Technologies EMIO-3450 Quick Manual

Brand: VIA Technologies

Model: EMIO-3450

Type: Quick Manual

Packing List:

Packing List:Packing List:

Packing List:

EMIO

EMIOEMIO

EMIO-

-3450

34503450

3450-

-00A1

00A100A1

00A1

•

1 x EMIO-3450 Em-IO card

•

1 x Board-to-board audio cable (P/N: 99G33-190376)

•

1 x Board-to-board 2 port USB cable for USB connector

(P/N: 99G33-191036)

•

1 x Board-to-board 1 port USB cable for USB interface WLAN

connector (P/N: 99G33-191026)

•

1 x Hex spacer kit (P/N: 99G44-020192)

— 6 x M3*5.5*19mm

•

1 x Quick guide (P/N: 99G51-013064-10)

EMIO

EMIOEMIO

EMIO-

-3450

34503450

3450-

-01A1

01A101A1

01A1

All of the above plus:

•

1 x EMIO-1531 Bluetooth module kit

•

1 x EMIO-1532 GPS module kit

•

1 x EMIO-1530 WLAN module kit (US version)

•

1 x Software driver and utility CD (P/N: 99G64-021358-100)

EMIO

EMIOEMIO

EMIO-

-3450

34503450

3450-

-02A1

02A102A1

02A1

Same with EMIO-3450-01A1 except the WLAN module kit is the EU

version.

EMIO

EMIOEMIO

EMIO-

-3450

34503450

3450

Quick

QuickQuick

Quick Guide

Guide Guide

Guide

Key Features:

Key Features:Key Features:

Key Features:

• Compatible with Em-ITX form factor

• Optional support for WiFi, GPS,

Bluetooth, and HSPA/WCDMA/

EDGE/GPRS using miniPCIe module.

• Support one SIM slot

• Integrated 6W stereo audio power

amplifier

The EMIO-3450 Em-IO card is specially designed for Em-ITX form factor

mainboard. The combinations of both EMIO-3450 card and Em-ITX

mainboard is ideally suited for traffic, delivery, KIOSK, wireless, in-vehicle

system and fleet management applications.

The EMIO-3450 card can support one SIM card slot and four optional

wireless connectivity protocols for proper communication through

expansion modules. The four wireless protocols provide supports for

802.11b/g Wireless LAN, Bluetooth, GPS receiver and mobile network

such as HSPA/WCDMA/EDGE/GPRS. In addition, the EMIO-3450

offers HD Audio quality via a built-in 6W stereo audio power amplifier.

Note:

Note:Note:

Note:

Please ensure that all items in the packing list are present

before using this product. If any of the items are missing

or damaged, contact your distributor or sales

representative immediately.

Step 2

Step 2Step 2

Step 2

Secure the WLAN module in place with the two screws provided

with the WLAN kit.

P/N: 99G51-013064-10

Step 3

Step 3Step 3

Step 3

Insert the one end of the WLAN signal cable into the connector on

the WLAN module. Be sure to have the metal contacts facing

down before inserting.

Installing the WLAN

Installing the WLAN Installing the WLAN

Installing the WLAN

module

modulemodule

module

Specifications:

Specifications:Specifications:

Specifications:

• Bridge:

Bridge:Bridge:

Bridge:

PLX PEX8112 PCIe-to-PCI Bridge

• Mini PCIe Interface

Mini PCIe InterfaceMini PCIe Interface

Mini PCIe Interface

•

2 x Mini-PCIe slots

• SIM slot

SIM slotSIM slot

SIM slot

•

1 x SIM slot

• USB

USBUSB

USB

•

2 x USB 2.0 ports connector

• UART

UARTUART

UART

•

1 x D-sub 9-pin UART port

• Digital I/O

Digital I/ODigital I/O

Digital I/O

•

1 x D-sup 9 pin DIO port

• Digital I/O 5V Output:

Digital I/O 5V Output:Digital I/O 5V Output:

Digital I/O 5V Output:

•

1 x 2-Pole Phoenix connector (DC output for exter-

nal GPIO device)

• Audio:

Audio:Audio:

Audio:

Onboard TI TPA1517, 6W stereo audio power

amplifier

•

3 x 3.5mm TRS jacks: Line-in, Speak-out, Mic-in

• WLAN (option):

WLAN (option): WLAN (option):

WLAN (option):

Reserved socket for EMIO-1530 WLAN module.

•

Supports IEEE802.11b/g

• Bluetooth (option):

Bluetooth (option):Bluetooth (option):

Bluetooth (option):

Reserved socket for EMIO-1531 Bluetooth module.

•

Bluetooth core specification version 2.1 compliant

+EDR supported module

• GPS (option):

GPS (option):GPS (option):

GPS (option):

Reserved socket for EMIO-1532 GPS receiver

module

•

SirFStarII base of 20-channel GPS receiver

•

Support external antenna

• 3G Mobile Broadband (option):

3G Mobile Broadband (option):3G Mobile Broadband (option):

3G Mobile Broadband (option):

Reserved MiniPCIe slots for mobile broadband

modules that supports HSPA/WCDMA/EDGE/GPRS.

•

EMIO-1534, Ericsson Mobile Broadband Module

F3307, data rate up to 7.2Mbps downlink and

2Mbps uplink.

•

EMIO-1538, Motorola Mobile Broadband Module

HTM1000, data rate up to 10.1Mbps downlink and

5.56Mbps uplink.

• Dimensions:

Dimensions:Dimensions:

Dimensions:

•

170 mm (W) x 120 mm (L)

• Operating Temperature:

Operating Temperature:Operating Temperature:

Operating Temperature:

•

-20°C ~ 70°C

•

With EMIO-1532 module: -20°C ~ 60°C;

•

With EMIO-1530 module: -20°C ~ 60°C

• Humidity:

Humidity:Humidity:

Humidity:

•

0% ~ 90% relative humidity, non-condensing

Step 1

Step 1Step 1

Step 1

Locate the mounting holes for the WLAN module. The mounting

holes have two standoffs pre-mounted. Then align the two

mounting holes on the WLAN module with the mounting holes

on the standoffs.

Step 4

Step 4Step 4

Step 4

Insert the other end of the WLAN signal cable into the connector

labeled JWLAN1 on the upper board. Be sure to have the metal

contacts facing down before inserting.

The WLAN kit should include the WLAN module, two screws, one

board-to-board cable, one mini coaxial cable, one washer, one nut,

and one external antenna.

Installing the Bluetooth

Installing the Bluetooth Installing the Bluetooth

Installing the Bluetooth

module

modulemodule

module

The Bluetooth kit should include the Bluetooth module, one screw,

and one board-to-board cable.

The optional Bluetooth module includes a printed antenna and

uses the QCM-QBT400UB Bluetooth controller. The Bluetooth

module is classified as a Class 2 device with an effective range of 10

meters. It supports multi-point operation and a full 7-slave piconet.

Step 3

Step 3Step 3

Step 3

Insert one end of the Bluetooth signal cable into the connector on

the Bluetooth module. Be sure to have the metal contacts facing

down before inserting.

Step 2

Step 2Step 2

Step 2

Align the mounting holes and secure the Bluetooth module to the

EMIO-3450.

Step 1

Step 1Step 1

Step 1

Locate the mounting hole for the Bluetooth module. The

mounting hole (labeled U31) is located next to the edge of the

upper board near the audio jacks.

Step 4

Step 4Step 4

Step 4

Insert the other end of the Bluetooth signal cable into the

connector labeled JBT1 on the upper board. Be sure to have the

metal contacts facing down before inserting.

Step 5

Step 5Step 5

Step 5

Secure the WLAN antenna jack to the chassis with the toothed

washer and nut, then attach the antenna Connect the WLAN

antenna cable to the micro RF connector labeled MAIN on the

WLAN module.

Step 4

Step 4Step 4

Step 4

Align the two mounting holes on the GPS module with the

mounting holes on the standoffs. Then secure the GPS module

with two screws.

VIA Technologies, Inc.

1F, 531, Zhong-Zheng Road,

Xindian Dist., Taipei New City

231, Taiwan

Tel: 886-2-2218-5452

Fax: 886-2-2218-5453

Web: www.via.com.tw

For more information on this and

other VIA products, please visit

www.viaembedded.com.

For further support and service,

please visit www.via.com/tw/en/

products/mainboards/contact.jsp

Layout

LayoutLayout

Layout

Pinouts

PinoutsPinouts

Pinouts

PinPin

Signal

SignalSignal

Signal

PinPin

Signal

SignalSignal

Signal

1 LINE_OUT_R 2 LINE_OUT_L

3 LINE_IN_R 4 LINE_IN_L

5 MIC_R_R 6 MIC_R_L

7 KEY 8 NC

9 AGND 10 AGND

JAUDIO1

JAUDIO1JAUDIO1

JAUDIO1

PinPin

Signal

SignalSignal

Signal

1 W_LESS_LED

2 GND

JWLESS

JWLESSJWLESS

JWLESS-

-LED1

LED1LED1

LED1

Installing the Mobile

Installing the MobileInstalling the Mobile

Installing the Mobile

Broadband module

Broadband moduleBroadband module

Broadband module

The Mobile Broadband kit should include the broadband module,

one screw, one mini coaxial cable, one washer, one nut, and one

external antenna. The broadband module options of EMIO-1534

(Ericsson Mobile Broadband Module F3307) or EMIO-1538

(Motorola Mobile Broadband Module HTM1000).

PinPin

Signal

SignalSignal

Signal

1 BT_LED

2 GND

JBT

JBTJBT

JBT-

-LED1

LED1LED1

LED1

Step 3

Step 3Step 3

Step 3

Once the module has been fully inserted, secure the module with

two screws to the standoffs.

Installing the GPS

Installing the GPS Installing the GPS

Installing the GPS

module

modulemodule

module

The GPS kit should include the GPS module, two screws, one

board-to-board cable, one mini coaxial cable, one washer, one nut,

and one external antenna.

The optional GPS module includes a Leadtek LR9102 20-channel

GPS receiver.

Step 1

Step 1Step 1

Step 1

Insert one end of the GPS signal cable into the connector on the

GPS module. Be sure to have the metal contacts facing down

before inserting.

Step 2

Step 2Step 2

Step 2

Insert the other end of the GPS signal cable into the connector

labeled JGPS1 on the upper board. Be sure to have the metal

contacts facing down before inserting.

Step 3

Step 3Step 3

Step 3

Locate the mounting holes for the GPS module. The mounting

holes have two standoffs pre-mounted on the upper board next to

the mounting location of the WLAN module.

Step 5

Step 5Step 5

Step 5

Insert the antenna cable (provided with the GPS kit) into the GPS

antenna hole. Secure the GPS antenna jack to the chassis with the

toothed washer and nut. Then attach the antenna provide with

Step 6

Step 6Step 6

Step 6

Connect the other end of the GPS antenna cable to the micro-RF

connector on the GPS module.

Step 1

Step 1Step 1

Step 1

Locate the Mini-PCIe slot (MINIPCIE2) near the center of the upper

board.

Step 4

Step 4Step 4

Step 4

Insert the antenna cable into the Mobile broadband antenna hole

from the inside. Secure the Mobile Broadband antenna jack to the

chassis with the toothed washer and nut.

Step 5

Step 5Step 5

Step 5

Attach the antenna provide with the Mobile Broadband kit to the

Mobile Broadband antenna jack.

(Top view)

(Top view)(Top view)

(Top view)

(Bottom View)

(Bottom View)(Bottom View)

(Bottom View)

JWXAN

JWXANJWXAN

JWXAN-

-LED1

LED1 LED1

LED1 (for MINIPCIE1 slot)

(for MINIPCIE1 slot)(for MINIPCIE1 slot)

(for MINIPCIE1 slot)

JWXAN

JWXANJWXAN

JWXAN-

-LED2

LED2 LED2

LED2 (for MINIPCIE2 slot)

(for MINIPCIE2 slot)(for MINIPCIE2 slot)

(for MINIPCIE2 slot)

PinPin

Signal

SignalSignal

Signal

PinPin

Signal

SignalSignal

Signal

1 VUSB4 2 VUSB4

3 USBD_T3- 4 USBD_T4-

5 USBD_T3+ 6 USBD_T4+

7 GND 8 GND

9 Key 10 GND

JUSB_1/2

JUSB_1/2JUSB_1/2

JUSB_1/2

PinPin

Signal

SignalSignal

Signal

PinPin

Signal

SignalSignal

Signal

1 -DCD_2 2 SIO_RXD2-UR

3 SIO_TXD2-UR 4 -DTR_2

5 GND 6 -DSR_2

7 -RTS_2 8 -CTS_2

9 -RI_2 10 key

JUR1

JUR1JUR1

JUR1

PinPin

Signal

SignalSignal

Signal

1 SIO_TXD2-UR

2 TXD_2

3 SIO_TXD2-PMM

J8J8

J9J9

PinPin

Signal

SignalSignal

Signal

PinPin

Signal

SignalSignal

Signal

1 WWAN_LED+ 2 WWAN_LED-

3 WLAN_LED+ 4 WLAN_LED-

5 WPAN_LED+ 6 WPAN_LED-

PinPin

Signal

SignalSignal

Signal

PinPin

Signal

SignalSignal

Signal

1 WWAN_LED+ 2 WWAN_LED-

3 WLAN_LED+ 4 WLAN_LED-

5 WPAN_LED+ 6 WPAN_LED-

PinPin

Signal

SignalSignal

Signal

1 SIO_RXD2-UR

2 RXD_2

3 SIO_RXD2-PMM

Note:

Note:Note:

Note:

WWAN — Wireless Wide Area Network

WLAN — Wireless Local Area Network

WPAN—Wireless Personal Area Network

Step 2

Step 2Step 2

Step 2

Align the notch on the Mobile Broadband module with the notch

on the Mini-PCIe slot (MINIPCIE2) then insert the module

horizontally.

VIA Technologies EMIO-3450 Quick Manual

VIA Technologies EMIO-3450 Quick Manual

VIA Technologies EMIO-3450 Quick Manual

Related papers

Other documents