Leadtek LR 9450(USB) User manual

Leadtek GPS LR9450 Smart Antenna

1

Product ID: Leadtek GPS LR9450

Leadtek GPS LR9450 Smart Antenna

Version A

January 2007

Headquarters of Leadtek Research Inc.

18F, 166 Chien-Yi Rd., Chung Ho City, Taipei County 23511, Taiwan

TEL: +886(0)2 8226 5800

FAX: +886(0)2 8226 3087

http://www.leadtek.com

E-mail: mailto:service_gps@leadtek.com

Leadtek GPS LR9450

Smart Antenna

Leadtek GPS LR9450 Smart Antenna

2

TABLE OF CONTENTS

1. Introduction...........................................................................................................3

2. Features................................................................................................................4

3. Hardware ..............................................................................................................5

4. Package Contents...............................................................................................6

5. Install Leadtek Navigator CE (PDA).................................................................7

6. Install Leadtek Navigator (PC) ........................................................................11

7. Test Leadtek GPS LR9450..............................................................................15

8. Install the USB Driver .......................................................................................20

9. Appendix A: Limited Warranty......................................................................... 23

10. Appendix B: Safety Information ......................................................................24

11. Appendix C: GPS FAQ.....................................................................................25

Leadtek GPS LR9450 Smart Antenna

3

1. Introduction

Thank you for purchasing Leadtek GPS LR9450 Smart Antenna. Leadtek GPS LR9450 is an

excellent navigator in all weather conditions and environments. Highly waterproof (* 1), it can

be used outdoors. Featuring the next generation navigating system, LR9450 will work together

with the map software on PDA or PC to guide you when you are lost. Once again, we

appreciate that you have chosen this product, and we sincerely hope that it will facilitate

maximum convenience in use.

*1. Leadtek GPS LR9450 passed the IPX6 waterproof test, so you can even use it on rainy

days. However, we cannot guarantee that the product will function properly when it is

soaked in water.

Leadtek GPS LR9450 Smart Antenna

4

2. Features

20-channel all-in-view tracking

Cold/Warm/Hot Start: 42/35/1 sec. respectively

Reacquisition time: 0.1 sec.

Built-in rechargeable and power-saving battery

Built-in high WAAS for accurate navigation

Waterproof to IPX 6 standard

Magnet and non-slip pad on the back

Leadtek GPS LR9450 Smart Antenna

5

3. Hardware

1.USB connector

2.LED indicator

LED Status

Description

Steadily blue Power on and scanning for GPS signals.

Blue, flashing 3D navigation complete.

Leadtek GPS LR9450 Smart Antenna

6

4. Package Contents

(1) 1 x Leadtek GPS LR9450 Smart Antenna

(2) 1 x Navigator Software CD-ROM

(3) 1 x warranty document

Leadtek GPS LR9450 Smart Antenna

7

5. Install Leadtek Navigator CE (PDA)

Step 1

Before installing Leadtek Navigator CE, make sure that you have installed Microsoft

ActiveSync to your PDA. Insert the software CD-ROM into the CD-ROM drive.

The following screen should appear automatically. If not, run “install.exe”.

Click "Leadtek Navigator CE” to initialize installation.

Leadtek GPS LR9450 Smart Antenna

8

Step 2

The installation dialog box appears.

Click "Next".

Step 3

The dialog box of Destination Location appears, showing the default destination folder. To

change it, click Browse to select a different folder for installation. If you do not wish to change

the destination folder, click "Next".

Leadtek GPS LR9450 Smart Antenna

9

Step 4

You are now ready to install the software. Click "Next” to begin the installation.

Step 5

Installation is in progress.

Leadtek GPS LR9450 Smart Antenna

10

Step 6

Once the installation is complete, check your PDA screen to see if additional steps are

required to complete the installation. Click "OK".

Leadtek GPS LR9450 Smart Antenna

11

6. Install Leadtek Navigator (PC)

Step 1

Before installing Leadtek Navigator, make sure that you have installed Microsoft ActiveSync to

your PC. Insert the software CD-ROM into the CD-ROM drive.

The following screen should appear automatically. If not, run “install.exe”.

Click “Leadtek Navigator” to initialize installation.

Leadtek GPS LR9450 Smart Antenna

12

Step 2

The installation dialog box and the copyright statement appear.

Click “Next”.

Leadtek GPS LR9450 Smart Antenna

13

Step 3

The dialog box of Destination Location appears, showing the default destination folder. To

change it, click Browse to select a different folder for installation. If you do not wish to change

the destination folder, click "Next".

Step 4

Select ”Leadtek GPS Products”, and then click “Next”.

Leadtek GPS LR9450 Smart Antenna

14

Step 5

Installation is in progress.

Step 6

Once the installation is complete, check your PC screen to see if additional steps are required

to complete the installation. Click "Finish".

Leadtek GPS LR9450 Smart Antenna

15

7. Test Leadtek GPS LR9450

Step 1

Before testing Leadtek GPS 9450, make sure that you have installed "Leadtek Navigator” or

“Leadtek Navigator CE” to your personal navigation device.

Step 2

Follow the steps below to test Leadtek GPS 9450.

*See page 4 for information about installing Leadtek Navigator CE (PDA).

1.Click "Programs". 2. Select “Navigator”.

Leadtek GPS LR9450 Smart Antenna

16

3. Click "Tools”. 4.Click “Port Setting”.

5. Dedicate a parallel port on your PDA to LR9450. For most PDAs, the port should be COM1.

Click "OK" to begin GPS navigation.

Leadtek GPS LR9450 Smart Antenna

17

6. Once the latitude is confirmed, the screen will show the current position.

Leadtek GPS LR9450 Smart Antenna

18

7. To view a list of satellites and CN ratio, click “View " and then choose “Signal Level”.

In normal navigation mode, the data are displayed in green, and the LED on the device

flashes in blue.

Leadtek GPS LR9450 Smart Antenna

19

8. To display NMEA output from LR9450, click "VIEW" and then click “Development".

*PS. After launching Leadtek Navigator, remember to disconnect before starting

navigation (to disconnect, click "Tools"). This is to prevent the program from occupying

the COM port and blocking connections between LR9450 and other navigation

software.

Leadtek GPS LR9450 Smart Antenna

20

8. Install the USB Driver

<Note> Install the USB driver before connecting the USB cable.

Step 1

Insert the CD-ROM into the CD-ROM drive. Click “USB Driver” to proceed.

Page is loading ...

Leadtek LR 9450(USB) User manual

This manual is also suitable for

Leadtek LR 9450(USB) User manual

Related papers

Other documents