Acura PowerBrick 5.0-i7 Quick Manual

Category
Car video systems
Type
Quick Manual
PowerBrick 5.0-i7 Quick Guide
Acura Embedded Systems Inc. Updated in Nov 6/13
PowerBrick5.0-i7
Quick Guide
Edition 3.0
Small and rugged
Industrial Computer
with Intel® Gen3 Corei7
Acura Embedded Systems Inc.
Index
1.
OVERVIEW
-----------------------------------
2
2.
MAIN FEATURES
-----------------------------------
2
3. SYSTEM INSTALLATION ----------------------------------- 4
4.
POWER IGNITION CONTROLS
-----------------------------------
5
5.
POWER INPUT CONNECTOR
-----------------------------------
5
6. DIAGNOSIS AND MAINTENANCE ----------------------------------- 6
1
PowerBrick 5.0-i7 Quick Guide
Acura Embedded Systems Inc. Updated in Nov 6/13
1. OVERVIEW
As a rugged and powerful computer, PowerBrick5.0-i7 is based on an Intel® Genera-
tion3 Core™i7 processor and an Intel® HD Graphics 4000 accelerating chip.Its
Removable Dual SATA Storage slots which have RAID feature allow to realize
mirroring disk with two fast SSD hard drives. Also, Its memory can earily upgrade to 8
GB. The design focuses on elements essential for a variety of industrial applications
and environments excluding unneccesary hardware. The architecture is modular which
allows for upgrading and expansions.
2. MAIN FEATURES
Power Brick 5.0-i7 front Interface
Power Brick 5.0-i7 rear Interface
System
CPU
Intel Gen 3 Core i73517UE 1.7GHz
Chipset
QM77
Memory
1 x DDR3 1066/1333/1600 MHz SODIMM up to 8 GB
LAN Chipset
Intel I210AT Gb/s Ethernet Controllers Onboard
Support PXE and WOL
Audio
Realtek ALC662 HD Codec onboard
Watchdog
Watchdog Timer Support, Offer 1 – 255 Step(Optional)
Graphics
Intel® HD Graphics 4000
DirectX Video Acceleration (DXVA) for Accelerating Video
Processing
Full AVC/VC1/MPEG2 HW Decode
Supports DirectX 11/10.1/10/9 and OpenGL 3.0
Resolution
Up to 1920 x 1200
Storage
Type 2 x 2.5” Drive Bay for SATA Type HDD / SSD, Support
RAID 0, 1
I/O
Serial Port
3 x RS232 (COM1,2 with RS-422/485, RS-485 Support Auto
Direction Control)
USB Port
4 x USB 3.0 Ports on Front I/O
LAN
2 x RJ45 Ports for GbE
Video Port
1 x DVII , 1 x VGA Output and 1x Display Port
DIO Port
4 in and 2 out with Relay 12V / 80mA
Audio
1 x Lineout (Default is 1 on Rear I/O)
SIM Card Socket
2 x SIM Card socket supported onboard with eject
Environment
Operating Temp
40ºC ~ 70ºC (Default CPU 17Watt)
Storage Temp
40 ~ 80ºC
Relative Humidity
0% RH95% RH
Vibration (random)
2.5g@5~500 Hz with SSD
Vibration
Operating
MIL
STD
810F, Method 514.5, Category 20,
Ground VehicleHighway
Truck Storage
MILSTD810F, Method 514.5, Category 24, Integrity Test
Shock Operating
MIL
STD
810F, Method 516.5, Procedure I,
Crash Hazard
MILSTD810F, Method 516.5, Procedure V,Ground
equipment=100
Power
Power Input 9V32V DC Power input
Power Protection Automatics Recovery Short Circuit
Protection
Power Management Vehicle Power Ignition for Variety
Vehicle
Power Off Control Power off Delay Time Setting by Software,
Default is 5 Mins
UPS (Battery Internal Battery Kit) for 10 Mins Operating
(Optional)
Qualification
Certifications CE, FCC Class A, eMark
Mechanical
Construction Aluminum alloy
Mounting Supports wall
mount
Weight 1.780 kg (bare
bone)
Dimensions 250 x 150 x 55 mm
2
3G Antenna(MAIN) SIM Card2 LAN1 LAN2 LAN3 LAN4 USB3.0 GPS Antenna
Power Button LED 2.5 Storage Bay SIM Card1 3G Antenna(AUX)
WiFi/BT Antenna DIO COM3/ODO COM4 VGA in Wifi/BT Antenna
(MAIN)
(AUX)
MIC Line Out COM1 COM2 DP DVI DC Power in
PowerBrick 5.0-i7 Quick Guide
Acura Embedded Systems Inc. Updated in Nov 6/13
3. SYSTEM INSTALLATION
Installing Removable Hard Drive
Push the HDD Holder into the socket as shown in the picture.
Installing SIM Card
Put your SIM Card into the holder and Take the SIM card holder and Insert it
into the socket as shown in the picture.
4. POWER IGNITION CONTROLS
Ignition On/Off status detectable by SW
If the ignition is off and the system is still on after 5 minutes, PowerBrick5.0-i7
will shut down automatically.
If the ignition is turned on again and the power-off delay is in progress,
PowerBrick5.0-i7 will cancel the delay function and will continue to operate
normally.
If the ignition is turned on again and the power-off delay ended,
PowerBrick5.0-i7 will shut down completely will power-on again automatically.
5. POWER INPUT CONNECTOR
Power Brick5.0'-i7's Power Wiring Diagram
4
1 GND 2 DC+ iN 3 IGNITION
10A
Computer connecter :
pin1-Negative
pin2-DC+ 9~32V
pin3-Ignition
If you don't use Ignition switch,
Please connect pin2 and pin3 wire together.
5
PowerBrick 5.0-i7 Quick Guide
Acura Embedded Systems Inc. Updated in Nov 6/13
6. DIAGNOSIS AND MAINTENANCE
When Main Power Switch (on the front plate) is on (pilot LED is “Blue) and
power supply is normal.
When Main Power Switch is standby (pilot LED is “Red“ ) and power supply is
normal.
There are four status LED (on the front plate) is shown diferent colors as
following.
1. If ACC Status LED lit “ Green “,it indicates that Ignition is off and power
supply is normal.
If ACC Status LED lit flash "Green",it indicates that Ignition is on.
2. UPS Status LED lit “ Red indicates that UPS (Optional Feature) is on.
3. HDD Status LED lit flash “ Red indicates hand drive proper operation
and health.
4. WWAN Status LED lit flash Green indicates WWAN connecting proper
operation and health.
With the unique set of products, Acura Embedded Systems remains committed to its
goal of providing trouble-free and customer-friendly service. A special customer service
unit has been set up specifically to cater to our esteemed customers' needs.
Technical Support:
For technical support contact your Salesperson
support@acuraembedded.com
Mailing address:
Acura Embedded Systems Inc.
Ph: (604) 502-9666 Fax: (604) 502-9668
Toll Free 1-866-502-9666
POWER
HDD UPS
ACC WWAN
6
#101-17825 64 Ave, Surrey, BC V3S 1Z3, CANADA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Acura PowerBrick 5.0-i7 Quick Manual

Category
Car video systems
Type
Quick Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI