Brocade Communications Systems ICX 7450 series Hardware Installation Manual

Brand: Brocade Communications Systems

Model: ICX 7450 series

Category: Network switches

Type: Hardware Installation Manual

53-1003623-03

10 October 2016

Brocade ICX 7450

Hardware Installation Guide

Supporting FastIron Software Release 08.0.30

ADX, AnyIO, Brocade, Brocade Assurance, the B-wing symbol, DCX, Fabric OS, ICX, MLX, MyBrocade, OpenScript, VCS, VDX, and

Vyatta are registered trademarks, and HyperEdge, The Effortless Network, and The On-Demand Data Center are trademarks of

Brocade Communications Systems, Inc., in the United States and/or in other countries. Other brands, products, or service names

mentioned may be trademarks of their respective owners.

Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning

any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to

this document at any time, without notice, and assumes no responsibility for its use. This informational document describes

features that may not be currently available. Contact a Brocade sales office for information on feature and product availability.

Export of technical data contained in this document may require an export license from the United States government.

The authors and Brocade Communications Systems, Inc. shall have no liability or responsibility to any person or entity with

respect to any loss, cost, liability, or damages arising from the information contained in this book or the computer programs that

accompany it.

The product described by this document may contain “open source” software covered by the GNU General Public License or other

open source license agreements. To find out which open source software is included in Brocade products, view the licensing

terms applicable to the open source software, and obtain a copy of the programming source code, please visit

http://www.brocade.com/support/oscd.

Title Publication number Summary of changes Date

Brocade ICX 7450 Hardware Installation

Guide

53-1003399-01 Initial Release September 2014

Brocade ICX 7450 Hardware Installation

Guide

53-1003399-02 Added support for DC power

supply

November 2014

Brocade ICX 7450 Hardware Installation

Guide

53-1003623-01 Updated document number,

release date, and software

release number

March 2015

Brocade ICX 7450 Hardware Installation

Guide

53-1003623-02 Updates to the Technical

Specifications Appendix.

April 2015

Brocade Communications Systems, Incorporated

Document History

Corporate and Latin American Headquarters

Brocade Communications Systems, Inc.

130 Holger Way

San Jose, CA 95134

Tel: 1-408-333-8000

Fax: 1-408-333-8101

E-mail: info@brocade.com

Asia-Pacific Headquarters

Brocade Communications Systems China HK, Ltd.

No. 1 Guanghua Road

Chao Yang District

Units 2718 and 2818

Beijing 100020, China

Tel: +8610 6588 8888

Fax: +8610 6588 9999

E-mail: china-info@brocade.com

European Headquarters

Brocade Communications Switzerland Sàrl

Centre Swissair

Tour B - 4ème étage

29, Route de l'Aéroport

Case Postale 105

CH-1215 Genève 15

Switzerland

Tel: +41 22 799 5640

Fax: +41 22 799 5641

E-mail: emea-info@brocade.com

Asia-Pacific Headquarters

Brocade Communications Systems Co., Ltd. (Shenzhen WFOE)

Citic Plaza

No. 233 Tian He Road North

Unit 1308 – 13th Floor

Guangzhou, China

Tel: +8620 3891 2000

Fax: +8620 3891 2111

E-mail: china-info@brocade.com

Brocade ICX 7450 Hardware Installation Guide iii

53-1003623-02

Contents

About This Guide

Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Supported hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . vii

How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Document conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Text formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Command syntax conventions . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Notes, cautions, and danger notices . . . . . . . . . . . . . . . . . . . . . viii

Notice to the reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Additional information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Brocade resources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Getting technical help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Document feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Chapter 1 Brocade ICX 7450 Overview

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Brocade ICX 7450 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Brocade ICX 7450 customizable switches . . . . . . . . . . . . . . . . . . 1

Views of the Brocade ICX 7450 switch . . . . . . . . . . . . . . . . . . . . . . . . 4

Brocade ICX 7450 slot and Ethernet port numbering . . . . . . . . . . . . 7

Supported expansion modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Supported transceivers and cables. . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Chapter 2 Installing the Brocade ICX 7450

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Unpacking the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Installation and safety considerations. . . . . . . . . . . . . . . . . . . . . . . .12

Electrical considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Environmental considerations . . . . . . . . . . . . . . . . . . . . . . . . . .12

Location considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Cabinet considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Recommendations for cable management . . . . . . . . . . . . . . . .13

Installation tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

iv Brocade ICX 7450 Hardware Installation Guide

53-1003623-02

Installation precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

General precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Lifting precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Power precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Installing the device on a desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Installing the device in a rack or cabinet. . . . . . . . . . . . . . . . . . . . . . 17

2-post rack mount installation . . . . . . . . . . . . . . . . . . . . . . . . . .18

4-post rack mount installation . . . . . . . . . . . . . . . . . . . . . . . . . .20

Connecting devices in a stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Stacking ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Stacking configuration requirements. . . . . . . . . . . . . . . . . . . . .22

Stacking cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Stack size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Stacking topologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Grounding the system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Powering on the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Power supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Power supply usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Using a second power supply . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Installing and replacing a power supply unit . . . . . . . . . . . . . . .26

Installing an AC power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Installing a DC power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

DC-DC power source cautions. . . . . . . . . . . . . . . . . . . . . . . . . . .30

Attaching a PC or terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Connecting to the management port. . . . . . . . . . . . . . . . . . . . . . . . . 31

Installing an SFP/SFP+ transceiver . . . . . . . . . . . . . . . . . . . . . . . . . .31

Connecting network devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Connecting a network device to a copper port . . . . . . . . . . . . .32

Connecting a network device to a fiber port . . . . . . . . . . . . . . .32

Chapter 3 Brocade ICX 7450 Operation

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

LED activity interpretation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Brocade ICX 7450 front panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . .35

Brocade ICX 7450 rear panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . 41

LED patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Diagnostic tests and monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Chapter 4 Managing the Brocade ICX 7450

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Hardware maintenance schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Brocade ICX 7450 Hardware Installation Guide v

53-1003623-02

Replacing a copper or fiber-optic module . . . . . . . . . . . . . . . . . . . . . 47

Removing a copper or fiber-optic module . . . . . . . . . . . . . . . . .48

Cabling a fiber-optic module . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Cleaning the fiber-optic connectors . . . . . . . . . . . . . . . . . . . . . .49

FRU removal and replacement procedures. . . . . . . . . . . . . . . . . . . .49

Replacing a power supply unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Determining the need to replace a power supply . . . . . . . . . . . 51

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Replacing a power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Replacing fan trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Determining the need to replace a fan assembly . . . . . . . . . . .52

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Installing or replacing the fan assembly . . . . . . . . . . . . . . . . . .53

Replacing an expansion module . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Installing or replacing an expansion module . . . . . . . . . . . . . . .54

Appendix A Brocade ICX 7450 Specifications

In this appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

System specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Weight and physical dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Environmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Power supply specifications (per PSU). . . . . . . . . . . . . . . . . . . . . . . . 61

Power consumption (typical configuration) . . . . . . . . . . . . . . . . . . . .61

Power consumption (maximum configuration) . . . . . . . . . . . . . . . . .62

Power consumption (modules). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Data port specifications (Ethernet) . . . . . . . . . . . . . . . . . . . . . . . . . .63

Serial port specifications (pinout - mini-USB) . . . . . . . . . . . . . . . . . .64

Serial port specifications (pinout RJ-45) . . . . . . . . . . . . . . . . . . . . . .64

Serial port specifications (protocol). . . . . . . . . . . . . . . . . . . . . . . . . .64

Memory specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Regulatory compliance (EMC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Regulatory compliance (safety)65

Regulatory compliance (environmental) . . . . . . . . . . . . . . . . . . . . . .65

Appendix B Brocade ICX 7450 Regulatory Statements

In this appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

USA (FCC CFR 47 Part 15 Warning) . . . . . . . . . . . . . . . . . . . . . . . . . .67

vi Brocade ICX 7450 Hardware Installation Guide

53-1003623-02

Industry Canada statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Europe and Australia (CISPR 22 Class A Warning) . . . . . . . . . . . . . .68

Germany (Noise Warning). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Japan (VCCI). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Korea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

China . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

BSMI statement (Taiwan) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Appendix C Brocade ICX 7450 Cautions and Danger Notices

In this appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Cautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Danger Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Index

Brocade ICX 7450 Hardware Installation Guide vii

53-1003623-02

About This Guide

Audience

This document is designed for system administrators with a working knowledge of Layer 2 and

Layer 3 switching and routing.

If you are using a Brocade Layer 3 Switch, you should be familiar with the following protocols if

applicable to your network: IP, RIP, OSPF, BGP, IS-IS, PIM, and VRRP.

Supported hardware and software

This document is specific to the Brocade ICX 7450 running FastIron release 08.0.20a.

How this document is organized

The document contains the following components:

•Chapter 1, “Brocade ICX 7450 Overview” provides an overview of the Brocade ICX 7450.

•Chapter 2, “Installing the Brocade ICX 7450” provides the information needed to install the

switch in your network.

•Chapter 3, “Brocade ICX 7450 Operation” discusses the day-to-day operational procedures for

using the switch.

•Chapter 4, “Managing the Brocade ICX 7450” provides procedures for removing and replacing

the field-replaceable units (FRUs), including the fan assemblies and power supplies.

•Appendix A, “Brocade ICX 7450 Specifications” provides tables of physical, environmental, and

general specifications.

•Appendix B, “Brocade ICX 7450 Regulatory Statements” provides a list of the regulatory

statements for safety compliance.

•Appendix C, “Brocade ICX 7450 Cautions and Danger Notices” provides a list of the

international caution and danger statements for safety compliance.

Document conventions

This section describes text formatting conventions and important notice formats used in this

document.

viii Brocade ICX 7450 Hardware Installation Guide

53-1003623-02

Text formatting

The narrative-text formatting conventions that are used are as follows:

bold text Identifies command names

Identifies the names of user-manipulated GUI elements

Identifies keywords

Identifies text to enter at the GUI or CLI

italic textProvides emphasis

Identifies variables

Identifies paths and Internet addresses

Identifies document titles

code text Identifies CLI output

For readability, command names in the narrative portions of this guide are presented in mixed

lettercase: for example, switchShow. In actual examples, command lettercase is all lowercase.

Command syntax conventions

Command syntax in this manual follows these conventions:

command Commands are printed in bold.

--option, option Command options are printed in bold.

-argument, arg Arguments.

[ ] Optional elements appear in brackets.

variable Variables are printed in italics. In the help pages, values are underlined or

enclosed in angled brackets < >.

... Repeat the previous element, for example “member[;member...]”

value Fixed values following arguments are printed in plain font. For example,

--show WWN

| Boolean. Elements are exclusive. Example: --show -mode egress | ingress

Notes, cautions, and danger notices

The following notices and statements are used in this manual. They are listed below in order of

increasing severity of potential hazards.

NOTE

A note provides a tip, guidance, or advice, emphasizes important information, or provides a

reference to related information.

Brocade ICX 7450 Hardware Installation Guide ix

53-1003623-02

CAUTION

A Caution statement alerts you to situations that can be potentially hazardous to you or cause

damage to hardware, firmware, software, or data.

DANGER

A Danger statement indicates conditions or situations that can be potentially lethal or extremely

hazardous to you. Safety labels are also attached directly to products to warn of these conditions

or situations.

Notice to the reader

This document might contain references to the trademarks of the following corporations. These

trademarks are the properties of their respective companies and corporations.

These references are made for informational purposes only.

Corporation Referenced Trademarks and Products

Microsoft Corporation Windows, Windows NT, Internet Explorer

Oracle Corporation Oracle, Java, Sun, Solaris

Netscape Communications Corporation Netscape

Mozilla Corporation Mozilla Firefox

Red Hat, Inc. Red Hat, Red Hat Network, Maximum RPM, Linux Undercover

Related publications

The following Brocade documents supplement the information in this guide:

•Brocade ICX 7450 Release Notes

•Brocade ICX 7450 Administration Guide

•Brocade ICX 7450 Platform and Layer 2 Configuration Guide

•Brocade ICX 7450 Layer 3 Routing Configuration Guide

•Brocade ICX 7450 Security Configuration Guide

•Brocade ICX 7450 IP Multicast Configuration Guide

•Brocade ICX 7450 Diagnostic Reference

•Unified IP MIB Reference

The latest versions of these guides are posted at http://www.myBrocade.com/ethernetproducts.

xBrocade ICX 7450 Hardware Installation Guide

53-1003623-02

Additional information

This section lists additional Brocade and industry-specific documentation that you might find

helpful.

Brocade resources

To get up-to-the-minute information, go to http://www.myBrocade.com to register at no cost for a

user ID and password.

White papers, online demonstrations, and data sheets are available through the Brocade website

at:

http://www.myBrocade.com/products-solutions/products/index.page

For additional Brocade documentation, visit the Brocade website:

http://www.myBrocade.com

Release notes are available on the MyBrocade website.

Getting technical help

To contact Technical Support, go to http://www.myBrocade.com/services-support/index.page for

the latest e-mail and telephone contact information.

Document feedback

Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and

completeness of this document. However, if you find an error or an omission, or you think that a

topic needs further development, we want to hear from you. Forward your feedback to:

documentation@brocade.com

Provide the title and version number of the document and as much detail as possible about your

comment, including the topic heading and page number and your suggestions for improvement.

Brocade ICX 7450 Hardware Installation Guide 1

53-1003623-02

Chapter

Brocade ICX 7450 Overview

In this chapter

•Brocade ICX 7450 features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

•Views of the Brocade ICX 7450 switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

•Brocade ICX 7450 slot and Ethernet port numbering. . . . . . . . . . . . . . . . . . . 7

•Supported expansion modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

•Supported transceivers and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Brocade ICX 7450 features

The Brocade ICX 7450 is a high-density aggregation switch that offers 10/100 Mbps Ethernet,

1/10 Gigabit Ethernet (GbE), and 10/40 GbE line rates, low latency cut-through switching, and up

to 336 Gbps throughput for campus LAN and classic Ethernet data center environments.

The Brocade ICX 7450 switch features:

•Comprehensive support for a range of 1 GbE, 10 GbE, and 40 GbE optics (refer to the latest

Brocade Optics Family Data Sheet).

•Dual redundant, hot-swappable power supplies available with intake or exhaust airflow

(250 W AC or 510W DC for non-PoE switches, and 1000W AC or 510W DC for PoE switches)

•ICX 7450-24P and ICX 7450-48P copper ports support PoE, PoE+, High PoE, and PoH.

•1G SFP module with four 100 Mbps / 1 GbE SFP ports

•10G SFP+ module with four 1/10 GbE SFP+ ports

•10G copper module with four 1/10 GbE RJ-45 ports

•Two 40 GbE QSFP+ stacking ports (supporting stacking for up to twelve switches)

•Dual redundant, hot-swappable fan units available with intake or exhaust airflow.

•One Gigabit Ethernet port (RJ-45) and one serial management port (mini-USB) to configure and

manage the switch through the CLI.

•One USB port for the transfer of software and configuration files from an external disk drive.

Brocade ICX 7450 customizable switches

The Brocade ICX 7450 base systems do not ship with power supplies, fans, stacking modules, or

media expansion modules. Fans, power supplies, and expansion modules are ordered separately

to allow for building the system that meets your network needs. Table 1 lists the available power

supplies, fans, and expansion modules.

2Brocade ICX 7450 Hardware Installation Guide

53-1003623-02

1Brocade ICX 7450 features

TABLE 1 SKUs for creating custom Brocade ICX 7450 switches

Part Description

ICX7400-4X1GF Brocade ICX 7450 4-port 1GbE SFP expansion module

ICX7400-4X10GF Brocade ICX 7450 4-port 1/10GbE SFP+ uplink / stacking expansion module

ICX7400-4X10GC Brocade ICX 7450 4-port 1/10GbE copper expansion module

ICX7400-1X40GQ Brocade ICX 7450 1-port 40G QSFP+ data uplink / stacking module

RPS15-E Brocade ICX non-PoE 250 W AC PSU, power-supply-side exhaust (port-side intake)

airflow

RPS15-I Brocade ICX non-PoE 250 W AC PSU, power-supply-side intake (port-side exhaust)

airflow

RPS16-E Brocade ICX PoE+ 1000 W AC PSU, power-supply-side exhaust (port-side intake)

airflow

RPS16-I Brocade ICX PoE+ 1000 W AC PSU, power-supply-side intake (port-side exhaust)

airflow

RPS16DC-E Brocade ICX 510 W DC PSU, power-supply-side exhaust (port-side intake) airflow

RPS16DC-I Brocade ICX 510 W DC PSU, power-supply-side intake (port-side exhaust) airflow

ICX-FAN10-E Brocade ICX 7450 power-supply-side exhaust airflow fan (two fans required with two

power supplies)

ICX-FAN10-I Brocade ICX 7450 power-supply-side intake airflow fan (two fans required with two

power supplies)

E1MG-100FX-IR-OM 100Base-FX IR SFP optic for SMF with LC connector, Optical Monitoring Capable. For

distances up to 15Km.

E1MG-100FX-LR-OM 100Base-FX LR SFP optic for SMF with LC connector, Optical Monitoring Capable. For

distances up to 40Km.

E1MG-100FX-OM 100Base-FX SFP optic MMF, LC connector, Optical Monitoring Capable

E1MG-BXD 1000Base-BXD SFP optic SMF, TX 1490nm and RX 1310nm, LC connector, single

strand SMF fiber. This optic should only be connected to an E1MG-BXU at the far end.

E1MG-BXU 1000Base-BXU SFP optic SMF, TX at 1310nm and RX at 1490nm, LC connector, single

strand SMF fiber. This optic should only be connected to an E1MG-BXD at the far end.

E1MG-LHA-OM-T 1000Base-LHA SFP optic SMF, LC connector, Optical Monitoring Capable (70km),

Industrial Temperature

E1MG-LX-OM 1000Base-LX SFP optic SMF, LC connector, Optical Monitoring Capable

E1MG-SX-OM 1000Base-SX SFP optic MMF, LC connector, Optical Monitoring Capable

E1MG-TX 1000BASE-TX SFP Copper, RJ-45 Connector

10G-SFPP-ER 10GBASE-ER SFP+ optic (LC), for up to 40km over SMF

10G-SFPP-LR 10GBASE-LR, SFP+ optic (LC), for up to 10km over SMF

10G-SFPP-LRM 10GBASE-LRM SFP+ optic (LC), for up to 220m over MMF

10G-SFPP-SR 10GBASE-SR, SFP+ optic (LC), target range 300m over MMF

10G-SFPP-ZR 10GBASE-ZR SFP+ optic (LC), for up to 80km over SMF

10G-SFPP-USR 10GE USR SFP+ optic (LC), target range 100m over MMF

40G-QSFP-LR4 40GBASE-LR4 QSFP+ optic (LC), for up to 10km over SMF

Brocade ICX 7450 features

Brocade ICX 7450 Hardware Installation Guide 3

53-1003623-02

40G-QSFP-SR4 40GBASE-SR4 QSFP+ optic (MTP 1x8 or 1x12), 100m over MMF

40G-QSFP-C-00501 40GE QSFP Direct Attached Copper Cable, 0.5m, 1-pack, passive

40G-QSFP-C-0101 40GE QSFP Direct Attached Copper Cable, 1m, 1-pack, passive

40G-QSFP-QSFP-C-0101 40GE Direct Attached QSFP+ to QSFP+ Active Copper cable, 1m, 1-pack

40G-QSFP-QSFP-C-0301 40GE Direct Attached QSFP+ to QSFP+ Active Copper cable, 3m, 1-pack

40G-QSFP-QSFP-C-0501 40GE Direct Attached QSFP+ to QSFP+ Active Copper cable, 5m, 1-pack

CC-MINIUSB-RJ45 Console cable, male mini-USB to male RJ-45

10G-SFPP-TWX-0101 Direct Attached SFPP Active Copper cable, 1m, 1-pack

10G-SFPP-TWX-0301 Direct Attached SFPP Active Copper cable, 3m, 1-pack

10G-SFPP-TWX-0501 Direct Attached SFPP Active Copper cable, 5m, 1-pack

10G-SFPP-TWX-0701 Direct Attached SFPP Active Copper cable, 7m, 1-pack

10G-SFPP-TWX-1001 Direct Attached SFPP Active Copper cable, 10m, 1-pack

ICX7750/7450-RMK FRU, Rack mount kit, 2 post, ICX 7750/7450

XBR-R000295 FRU, Universal rack mount kit, 4 post 24-32 inch depth rack, DX6740T/VDX6740T-1G

PCEURO Power Cord for RPS15/16, European version

PCUK Power Cord for RPS15/16, United Kingdom version

PCAUS Power Cord for use in Australia

PCJAPAN Power Cord for RPS15/16, Japan version

PCCHINA2-IEC309 Power Cord, China, IEC309 TO C13, 10A, 250V

PCSWISS-C1312G-HF Power Cord, Swiss, SEV1011 TO C13, 10A, 250V, halogen free

PCINDIA 6 foot AC power cord for India

TABLE 1 SKUs for creating custom Brocade ICX 7450 switches (Continued)

Part Description

4Brocade ICX 7450 Hardware Installation Guide

53-1003623-02

1Views of the Brocade ICX 7450 switch

Views of the Brocade ICX 7450 switch

Figure 1 shows the front view of the Brocade ICX 7450-24 switch.

FIGURE 1 Front view of the Brocade ICX 7450-24

Figure 2 shows the front view of the Brocade ICX 7450-24P switch.

NOTE

PoE/PoE+ power is available to ports 1-24. High PoE/PoH is limited to ports 1-8.

FIGURE 2 Front view of the Brocade ICX 7450-24P

1System LEDs 6Mini-USB console port

2 Media/Stacking module LEDs 7 Reset button

3 Stack unit ID display 8 1GBase-T RJ-45 ports 1/1/1 - 1/1/24

4 Management port (RJ-45) 9 SFP/SFP+/QSFP+ ports 1/2/1 - 1/2/4

5 USB port (for flash drive)

1System LEDs 6Mini-USB console port

2 Media/Stacking module LEDs 7 Reset button

3 Stack unit ID display 8 1GBase-T RJ-45 ports 1/1/1 - 1/1/24

4 Management port (RJ-45) 9 SFP/SFP+/QSFP+ ports 1/2/1 - 1/2/4

5 USB port (for flash drive)

Views of the Brocade ICX 7450 switch

Brocade ICX 7450 Hardware Installation Guide 5

53-1003623-02

Figure 3 shows the front view of the Brocade ICX 7450-48 switch.

FIGURE 3 Front view of the Brocade ICX 7450-48

Figure 4 shows the front view of the Brocade ICX 7450-48P switch.

NOTE

PoE/PoE+ power is available to ports 1-48. High PoE/PoH is limited to ports 1-8.

FIGURE 4 Front view of the Brocade ICX 7450-48P

1System LEDs 6Mini-USB console port

2 Media/Stacking module LEDs 7 Reset button

3 Stack unit ID display 8 1GBase-T RJ-45 ports 1/1/1 - 1/1/48

4 Management port (RJ-45) 9 SFP+ ports 1/2/1 - 1/2/4

5 USB port (for flash drive)

1System LEDs 6Mini-USB console port

2 Media/Stacking module LEDs 7 Reset button

3 Stack unit ID display 8 1GBase-T RJ-45 ports 1/1/1 - 1/1/48

4 Management port (RJ-45) 9 SFP+ ports 1/2/1 - 1/2/4

5 USB port (for flash drive)

6Brocade ICX 7450 Hardware Installation Guide

53-1003623-02

1Views of the Brocade ICX 7450 switch

Figure 5 shows the front view of the Brocade ICX 7450-48F switch.

FIGURE 5 Front view of the Brocade ICX 7450-48F

Figure 6 shows the rear view of the Brocade ICX 7450 switch.

FIGURE 6 Rear view of the Brocade ICX 7450

1System LEDs 6Mini-USB console port

2 Media/Stacking module LEDs 7 Reset button

3 Stack unit ID display 8 SFP port LEDs 1/1/1 - 1/1/48

4 Management port (RJ-45) 9 SFP+ ports 1/2/1 - 1/2/4

5 USB port (for flash drive)

1Grounding terminal 5Fan tray 1

2 Fan tray 2 6 Power supply unit 2

3 Uplink / Stacking module 4 7 Power supply unit 1

4 Uplink / Stacking module 3

Brocade ICX 7450 slot and Ethernet port numbering

Brocade ICX 7450 Hardware Installation Guide 7

53-1003623-02

Brocade ICX 7450 slot and Ethernet port numbering

Many CLI commands require users to enter port numbers as part of the command syntax, and

many show command outputs display port numbers. The port numbers are entered and displayed

in stack-unit/slot number/port number format.

The Brocade ICX 7450 contains the following slots and Ethernet ports:

•Slot 1 and Slot 2 are located on the front of the Brocade ICX 7450-24 and ICX 7450-24P

devices. Slot 1 contains 1 GbE RJ-45 ports 1/1/1 through 1/1/24, with odd port numbers on

the top row and port 1/1/1 on the left. Slot 2 contains 1/10 GbE SFP+ ports 1/2/1 and 1/2/3

on the top row (left to right), and ports 1/2/2 and 1/2/4 on the bottom row (left to right). Refer

to the following figure.

FIGURE 7 Brocade ICX 7450-24 and ICX 7450-24P slot numbering

•Slot 1 and Slot 2 are located on the front of the Brocade ICX 7450-48 and ICX 7450-48P

devices. Slot 1 contains 1 GbE RJ-45 ports 1/1/1 through 1/1/48, with odd port numbers on

the top row and port 1/1/1 on the left. Slot 2 contains 1/10 GbE SFP+ ports 1/2/1 and 1/2/3

on the top row (left to right), and ports 1/2/2 and 1/2/4 on the bottom row (left to right). Refer

to the following figure.

FIGURE 8 Brocade ICX 7450-48 and ICX 7450-48P slot numbering

•Slot 1 and Slot 2 are located on the front of the Brocade ICX 7450-48F device. Slot 1 contains

1 GbE SFP ports 1/1/1 through 1/1/48, with odd port numbers on the top row and port 1/1/1

on the left. Slot 2 contains 1/10 GbE SFP+ ports 1/2/1 and 1/2/3 on the top row (left to

right), and ports 1/2/2 and 1/2/4 on the bottom row (left to right). Refer to the following

figure.

FIGURE 9 Brocade ICX 7450-48F slot numbering

8Brocade ICX 7450 Hardware Installation Guide

53-1003623-02

1Supported expansion modules

•Slot 3 is located on the rear of the Brocade ICX 7450 switch and with a single-port module

installed contains 40 GbE QSFP+ stacking/data port 1/3/1, With a 4-port module installed,

Slot 3 contains 1/10 GbE SFP+ ports 1/3/1 and 1/3/3 on the top row (left to right), and ports

1/3/2 and 1/3/4 on the bottom row (left to right). Refer to Figure 10.

•Slot 4 is also located on the rear of the Brocade ICX 7450 switch and with a single-port module

installed contains 40 GbE QSFP+ stacking/data port 1/4/1, With a 4-port module installed,

Slot 4 contains 1/10 GbE SFP+ ports 1/4/1 and 1/4/3 on the top row (left to right), and ports

1/4/2 and 1/4/4 on the bottom row (left to right). Refer to Figure 10.

FIGURE 10 Brocade ICX 7450 rear slot numbering

Supported expansion modules

A 4-port 1GbE SFP expansion module can be purchased and installed in the slots shown in Table 2

on page 8 and Table 3 on page 9. The expansion module supports 1 GbE optics (refer to the

Brocade Optics Family Data Sheet).

A 4-port 1/10GbE SFP+ expansion module can be purchased and installed in the slots shown in

Table 2 on page 8 and Table 3 on page 9. The expansion module supports 1 GbE and 10 GbE

optics (refer to the Brocade Optics Family Data Sheet).

A 4-port 1/10GbE copper expansion module can be purchased and installed in the slots shown in

Table 2 on page 8 and Table 3 on page 9. The expansion module supports 1 GbE and 10 GbE

copper wired connections.

A 1-port 40GbE QSFP+ expansion module can be purchased and installed in the slots shown in

Table 2 on page 8 and Table 3 on page 9. The expansion module supports 40 GbE optics. This

module can be used for data uplink or stacking.

TABLE 2 Brocade ICX 7450-24 and 24P expansion slots and supported media modules

Module Slot 2 Slot 3 Slot 4

ICX7400-4X1GF 4X1G 4X100M 4X1G 4X100M 4X1G 4X100M

Yes Yes No No No No

ICX7400-4X10GF 4X10G 4X1G 4X10G 4X1G 4X10G 4X1G

Yes Yes Yes Yes Yes Yes

ICX7400-4X10GC 4X10G 4X1G 4X10G 4X1G 4X10G 4X1G

Yes Yes Yes Yes Yes Yes

ICX7400-1X40GQ 40G 4X10G 40G 4X10G 40G 4X10G

Yes No Yes No Yes No

TABLE 3 Brocade ICX 7450-48, 48P and 48F expansion slots and supported media modules

Module Slot 2 Slot 3 Slot 4

ICX7400-4X1GF 4X1G 4X100M 4X1G 4X100M 4X1G 4X100M

Yes Yes No No No No

ICX7400-4X10GF 4X10G 4X1G 4X10G 4X1G 4X10G 4X1G

Yes Yes Yes Yes Yes Yes

ICX7400-4X10GC 4X10G 4X1G 4X10G 4X1G 4X10G 4X1G

Yes Yes Yes Yes Yes Yes

ICX7400-1X40GQ 40G 4X10G 40G 4X10G 40G 4X10G

No No Yes No Yes No

Supported transceivers and cables

Brocade ICX 7450 Hardware Installation Guide 9

53-1003623-02

Instructions for installing or replacing an expansion module are described in “Replacing an

expansion module” on page 53.

FIGURE 11 40 GbE QSFP+ expansion module

NOTE

Pull the release lever down before removing a media or stacking module.

Supported transceivers and cables

For a list of supported transceivers and cables, refer to the Brocade Optics Family Data Sheet.

1Release lever latch 3QSFP+ slot

2 Module slot LEDs 4 Expansion module power LED

10 Brocade ICX 7450 Hardware Installation Guide

53-1003623-02

1Supported transceivers and cables

Page is loading ...

Brocade Communications Systems ICX 7450 series Hardware Installation Manual

Brand: Brocade Communications Systems

Model: ICX 7450 series

Category: Network switches

Type: Hardware Installation Manual

Download PDF

report

Brocade Communications Systems ICX 7450 series Hardware Installation Manual

Brocade Communications Systems ICX 7450 series Hardware Installation Manual

Related papers

Other documents