2. Spectrum Industries
  3. 97507B

Spectrum Industries 97507B Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Touchboards Rack-Mount Fans, models 97506 and 97507. This document provides details on how to attach the fans to a rack rail using screws, and it highlights the option to mount them directly behind acrylic panels for enhanced airflow. I'm ready to answer any questions you have about the installation process or the device.
  • What type of screwdriver is needed for installation?
    How many rack spaces do the fans require?
    How many screws are needed to mount the fan?
Tools Required:
Phillips Head Screwdriver
Rack-Mount Fans
97506 (double fan)
97507 (single fan)
Assembly Instructions:
0100365X Page 1 of 1
Before you begin, please make sure all parts and proper
quantities are included. Any parts damaged during shipment
must be reported within 15 days of receipt. To report
information regarding damages or if you have any questions,
please call 1-800-235-1262.
A. Determine Rack-Mount Fan location (Fans require 3 rack spaces.) Be sure fans will not interfere with any
components. (If mounting in a Masters®, Doctorate®, Media Manager®, or Media Director® cart and more airflow is
needed, the narrow acrylic panels on the door can be removed and fan mounted directly behind opening for
maximum airflow.)
B. Attach Rack-Mount Fan unit to rack rail using a screwdriver and (4) 10-32 x 5/8" screws as shown in Figure 1.
C. Plug fans into power source
ATTACH TO RACK RAIL
1.
050184
(4) 10-32 x 5/8 PHMS
Figure 1
/