Zip NET105 Non PoE 100Mbps Switches User guide

Zip
Brand
Zip
Model
NET105 Non PoE 100Mbps Switches
Type
User guide
This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery and recycling please return to your local designated
WEE/CG0783SS collection point as defined by your local council.
© 2023 System Q Ltd
1
5 & 8 Port Non-PoE 100mbps Switch
Zip is a registered trademark of System Q Ltd
Document ref: qNET105 , qNET108
All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. Whilst every effort is
made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible for any losses, no matter how they arise,
from errors or omissions in these instructions, or the performance or non-performance of the equipment refered to.
ZipNVR.com
Quick Start Guide
User Information
The switch must be installed in a clean, dry environment where
it will not be exposed to high temperatures, moisture or
excessive dust.
Do not touch the switch or any of its connections with wet
hands.
Ensure the power is switched off if the switch is not in use for a
long period of time.
There are no user serviceable parts in the switch and opening or
attempting to repair the product will void the warranty.
Do not use the device if the power cable is damaged.
The switch will auto detect connected devices,
simply plug and play for network switching.
The units add extra flexibility to a network
infrastructure thanks to 100 metre run
capabilities both in and out.
The switch has different uses and setup
options, providing network access to devices
like computers or recorders.
LED Status Indicators
Condition
Status
Power
On
The switch is receiving power
Off
The switch is not receiving power
Ports 1-8
Flashing
The port is connected and transmitting or receiving data
Off
No connection in the port
Troubleshooting
Possible Cause
Solution
No Power light on Switch
No power to the
device
Check power to device from external source. Check that the
power supply plugged into the switch.
Loose connection
Check that the power lead is plugged in to the PSU and the PSU is
plugged into the switch.
Network light not flashing
Poor quality cable or
termination
Check the Ethernet cabling to your device is of good quality and is
terminated correctly.
Slow flashing LEDs, No
network on load devices
Faulty cable or device
Turn the power off to the switch & unplug the load devices (Check
Ethernet cabling to load devices). Leave turned off for 10 seconds,
then power back up, plug each device back into switch
individually to help troubleshoot the suspect cable.
NET105
NET108
5 x RJ45 10/100Base-T
8 x RJ45 10/100Base-T
10Mbps / 100Mbp
Internal Use Only
-10°C ~ 55°C
DC 5V 200mA Max (2.5mm Power Adaptor Provided)
(w)88 x (d)62.5 x (h)19.5mm
(w)145 x (d)85 x (h)25mm
  • Page 1 1

Zip NET105 Non PoE 100Mbps Switches User guide

Zip
Brand
Zip
Model
NET105 Non PoE 100Mbps Switches
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents