BMW R53 Installation Instructions Manual

BMW
Brand
BMW
Model
R53
Type
Installation Instructions Manual

This manual is also suitable for

BMW R53: Enhance your driving experience with a remarkable hands-free system. Seamlessly connect your Ericsson T39 mobile phone to your car, enabling effortless communication on the go. Enjoy crystal-clear calls through the integrated loudspeaker and microphone, ensuring distraction-free conversations. Activate and manage calls with ease using the conveniently positioned control unit. Experience the convenience of hands-free technology, allowing you to stay focused on the road while staying connected.

BMW R53: Enhance your driving experience with a remarkable hands-free system. Seamlessly connect your Ericsson T39 mobile phone to your car, enabling effortless communication on the go. Enjoy crystal-clear calls through the integrated loudspeaker and microphone, ensuring distraction-free conversations. Activate and manage calls with ease using the conveniently positioned control unit. Experience the convenience of hands-free technology, allowing you to stay focused on the road while staying connected.

Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
R50 0260 Z
Retrofit Hands-Free Kit for Ericsson Mobile Phones T39
MINI (R50 and R53)
The installation time is approx. 2 hours, but this may vary depending on the condition of the car and the
equipment in it.
Retrofit / Installation kit No. 84 64 0 139 560
P
ar
t
s an
d
A
ccessor
i
es
Installation Instructions
EN/2
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
Contents
Section Page
Important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Hands-free kit connection overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. To install and connect the wiring harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6. To install the loudspeaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
7. To install the hands-free microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8. To install the mobile phone holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9. To install the hands-free control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
10. Concluding work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
11. Hands-free kit circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
EN/3
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
Important information
The retrofit kit is only for use within the dealership organisation.
Do not kink or damage the cables during the installation work since otherwise they may cause faults that can
later only be identified by extensive additional work. The costs incurred as a result of this will not be
reimbursed.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
This system does not require coding
Target group
The target group for these installation instructions is specialist personnel trained on MINI cars with specialist
knowledge of vehicle electrical systems.
Work:
All servicing, repair and installation work on MINI cars is completed at your own risk.
All work is to be carried out using current MINI repair manuals and circuit diagrams in a rational order using
the prescribed tools (special tools) and observing current health and safety regulations.
Required special tools
Crimping pliers for AMP contacts
Twist drill 5 mm
Step drill bit
Drill
EN/4
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
1. Preparations
0
TIS instruction No.
Conduct a brief test
Disconnect the negative pole of the battery 12 00 ...
The following components must be removed first of all:
Oddments box in instrument trim on the passenger side 51 16 390
Trim between front centre console and instrument panel 51 16 198
Radio 65 11 030
A pillar trim on the right 51 43 201
Interior mirror 51 16 060
Clock
EN/5
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
2. Parts list
0
Legend
0
1 Mobile phone holder
2 Loudspeaker
3 Hands-free control unit
4 Gooseneck
5 Holder for hands-free control unit
6 Power supply wiring harness
7 Mute circuit wiring harness
8 Hands-free microphone
9 Self-adhesive Velcro strip
10 Plug contact (4x)
11 Plug casing (4x)
12 Socket casing (4x)
13 Socket casing (4x)
R50 0272 Z
11
1
2
8
3
4
5
6 7
10 12 13
9
EN/6
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
3. Installation and cabling diagram
0
Legend
0
1 Radio plug X18126
2 Wiring harness
3 Hands-free control unit
4 Gooseneck with mobile phone holder
5 Hands-free microphone
6 Loudspeaker
5
4
6
3
2
1
R50 0216 Z
EN/7
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
4. Hands-free kit connection overview
0
0
0
Item Description Signal
Cable colour /
Cross-section
Connection location in the car Abbreviation / Slot
A Power supply wiring harness
--- --- --- ---
A1 Cable branch Earth SW
0.75 mm
2
With enclosed socket and plug contact on
radio plug
With new generation radio
Without new generation radio
X18126
PIN 12
PIN 15
A2 Cable branch Terminal 30 RT
0.75 mm
2
With enclosed socket and plug contact on
radio plug
With new generation radio
Without new generation radio
X18126
PIN 15
PIN 9
A3 2-pin SW plug
--- ---
On hands-free control unit
---
B Mute circuit wiring harness
--- --- --- ---
B1 Cable branch Mute SW
0.35 mm
2
With enclosed socket and plug contact on
radio plug
With new generation radio
Without new generation radio
X18126
PIN 10
PIN 4
B2 WS 5-pin plug
--- ---
On hands-free control unit
---
A1
A2
B1 B2
A3
A
B
R50 0256 Z
EN/8
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
5. To install and connect the wiring harness
0
0
0
0
0
Route branches
A1
–
A2
and
B1
to the radio plug
X18126
.
Route branches
A3
and
B2
to the oddments box on the
passenger side.
0
Cars with a new generation radio only
Connect branches
A1
–
A2
and
B1
as follows to the radio
plug
X18126
:
-
A1
, SW cable, to BR cable on PIN 12
-
A2
, RT cable, to RT/GN cable on PIN 15
-
B1
, SW cable, to WS/BR cable on PIN 10
See figure R50 0248 Z for the procedure.
0
Cars without a new generation radio only
Connect branches
A1
–
A2
and
B1
as follows to the radio
plug
X18126
:
-
A1
, SW cable, to BR cable PIN 15
-
A2
, RT cable, to RT/GN cable PIN 9
-
B1
, SW cable, to WS/BR cable PIN 4
See figure R50 0248 Z for the procedure.
0
All cars
Cut the corresponding cable of the radio plug at a
suitable point.
Crimp the socket contact (1) onto the cable end (2) of the
plug and put on the socket casing (3).
Crimp the plug contact (4) onto the open cable end (5),
crimp on the corresponding branch (7) and put on the
plug casing (6).
Connect the socket and plug casings (3+6) together.
X18126
A1-A2
B1
B2
A3
R50 0264 Z
X18126
A1-A2
B1
R50 0265 Z
X18126
A1-A2
B1
R50 0266 Z
7
2
5
3
1
6
4
R50 0248 Z
EN/9
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
6. To install the loudspeaker
0
0
0
0
Unscrew both knurled-head bolts (1) and remove the
holder (2) from the loudspeaker (3).
Drill a 5 mm hole in the centre of the holder (2).
0
Screw the holder (1) to the trim (3) using the existing Torx
screw (2).
0
Insert the loudspeaker (1) into the holder (2) and secure it
with the knurled-head bolts (3).
Route the loudspeaker cable (4) to the oddments box on
the passenger side.
2
3
1
R50 0202 Z
3
1
2
R50 0203 Z
2
4
3
1
R50 0204 Z
EN/10
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
7. To install the hands-free microphone
0
0
0
0
Use the self-adhesive Velcro strip to attach the hands-
free microphone (1) to the headlining in front of the clock
(2).
Route the microphone cable (3) beneath the headlining
towards the A pillar on the passenger side.
0
Route the microphone cable (1) to the oddments box on
the passenger side.
R50 0212 Z
3
1
2
1
R50 0231 Z
EN/11
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
8. To install the mobile phone holder
0
0
0
0
0
Remove the bottom section (1) from the mobile phone
holder (2).
0
Undo the Philips screw (1) and remove the mobile phone
holder (2) from the retaining foot.
0
Undo the Philips screws (1) and remove the rear cover (2).
0
Place the retaining foot (1) onto the gooseneck (2) and
mark the outline.
Drill a 22 mm hole (3) in the bottom area as shown.
R50 0269 Z
ERICSSON
1
2
1
2
R50 0268 Z
2
1
R50 0247 Z
R50 0257 Z
2
1
3
EN/12
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
8. To install the mobile phone holder
0
0
0
0
0
Route the cables (1) of the mobile phone holder through
the gooseneck (2) and put the rear cover (3) back on.
0
Screw the retaining foot (1) onto the gooseneck (3) using
a Philips screw (2).
0
Fasten the mobile phone holder (1) to the retaining foot
using a Philips screw (2).
0
Put the bottom section (1) back on the mobile phone
holder (2).
3
1
2
R50 0252 Z
R50 0267 Z
1
3
2
2
2
1
R50 0258 Z
R50 0259 Z
ERICSSON
1
2
EN/13
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
8. To install the mobile phone holder
0
0
Install the radio.
Install the gooseneck (1) and attach the connection cable
(2) as shown using cable ties (3). Route it to the oddments
box on the passenger side.
R50 0261 Z
240
km/h
2
1
3
EN/14
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
9. To install the hands-free control unit
0
0
0
0
0
Screw the hands-free control unit (1) onto the holder (3)
using a Philips screw (2).
0
Connect the loudspeaker cable plug (1), the microphone
cable plug (2), the mobile phone holder plug (3) and
branches
A6
and
B2
to the hands-free control unit (4).
0
Hook the holder (1) into the instrument carrier (2) from
behind and fasten it in place using the bar (3) and a
Philips screw (4).
0
The figure shows the installed holder (1) with the
instrument carrier removed (2).
"
R50 0262 Z
3
3
2
1
R50 0263 Z
2 3B2
1
4
A3
2
1
3
4
R50 0246 Z
R50 0254 Z
2
1
EN/15
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
10. Concluding work
- Connect battery
- Conduct a brief test
- Conduct a function test
- Assemble the car following the instructions to dismantle it in reverse order.
EN/16
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
11. Hands-free kit circuit diagram
Cars with a new generation radio only
0
31
30
MUTE
A1*
1 5 6
10 15 12
MIC-
MIC+
Handy
A2*
A3*
A4*
X1*
LSP-
LSP+
X2*
X3*
X4*
X5*
X6*
X7*
X8*
X18126
Y1*
0.35
SW
0.75
RT
0.75
SW
R50 0270 Z
EN/17
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
11. Hands-free kit circuit diagram
Cars without a new generation radio only
0
31
30
MUTE
A1*
1 5 6
4915
MIC-
MIC+
Handy
A2*
A3*
A4*
X1*
LSP-
LSP+
X2*
X3*
X4*
X5*
X6*
X7*
X8*
X18126
Y1*
0.35
SW
0.75
RT
0.75
SW
R50 0271 Z
EN/18
Retrofit / Installation kit No. 84 64 0 139 560
Installation Instructions No. 01 29 0 142 869 Issue date: 11.2001
11. Hands-free kit circuit diagram
Legend
All designations with an asterisk (*) only apply to these installation instructions and these circuit diagrams.
Cable colours
A1* Hands-free control unit
A2* Hands-free microphone
A3* Loudspeaker
A4* Mobile phone holder
X1* SW 2-pin pawl plug
X2* SW 2-pin pawl plug
X3* SW 10-pin plug
X4* WS 5-pin plug
X5* SW 2-pin plug
X6* Twin-lead terminal
X7* Twin-lead terminal
X8* Twin-lead terminal
X18126 Radio plug
Y1* To standard wiring harness
RT red
SW black
WS white
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

BMW R53 Installation Instructions Manual

BMW
Brand
BMW
Model
R53
Type
Installation Instructions Manual
This manual is also suitable for

BMW R53: Enhance your driving experience with a remarkable hands-free system. Seamlessly connect your Ericsson T39 mobile phone to your car, enabling effortless communication on the go. Enjoy crystal-clear calls through the integrated loudspeaker and microphone, ensuring distraction-free conversations. Activate and manage calls with ease using the conveniently positioned control unit. Experience the convenience of hands-free technology, allowing you to stay focused on the road while staying connected.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents