2. Extron
  3. CS 1226T Plus
CS 1226T Plus

Extron CS 1226T Plus, CS 1226T, CS 123T, CS 26T, CS 26T Plus, CS 3T Template

  • Hello! I am an AI chatbot trained to assist you with the Extron CS 1226T Plus Template. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
68-2328-01 Rev. C
11 14
Important Note: Print 1:1 only.
Do not scale.
9.075” (230.505 mm) cutout diameter
1. Mark the location where the speaker
will be centered and installed.
2. Align the center hole of the template
with the mark.
3. For speaker installation into fiberglass
ceiling tile only, go to the Fiberglass
Tile Adapter Instructions box on the
right. Otherwise, proceed to step 4.
4. Trace a circle around the cutout template.
5. Cut out the traced circle.
Cutout Template Instructions
a. Place the Fiberglass Tile Adapter around
the outer diameter of the template.
b. Trace a circle around the outer diameter
of the berglass tile adapter.
c. Proceed to step 5.
Fiberglass Tile Adapter Instructions
SpeedMount
®
Ceiling Speaker System
Cutout Template
/