2. Toro
  3. Pro Control Damper Kit, 2011 and After TimeCutter Riding Mower
Pro Control Damper Kit, 2011 and After TimeCutter Riding Mower

Toro Pro Control Damper Kit, 2011 and After TimeCutter Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Pro Control Damper Kit, 2011 and After TimeCutter Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the purpose of the Toro Pro Control Damper Kit?
    What parts are included in the Toro Pro Control Damper Kit?
    How do I prepare my Toro TimeCutter riding mower for the damper kit installation?
    How do I remove the existing pods from my Toro TimeCutter riding mower?
    How do I install the dampers included in the kit?
    How do I complete the installation of the Toro Pro Control Damper Kit?
FormNo.3423-691RevA
ProControl
™
DamperKit
2011andAfterTimeCutter
®
RidingMower
ModelNo.138-7588
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Nopartsrequired
–
Preparethemachine.
Damper2Installthekit.
PreparingtheMachine
1.Parkthemachineonalevelsurface.
2.Movethemotion-controlleverstotheNEUTRAL-LOCKposition.
3.Engagetheparkingbrake.
4.Shutofftheengineandremovethekey.
g037289
Figure1
©2018—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3423-691*A
InstallingtheKit
1.Removethe3shoulderscrewsfromeachpod
andremovethepodsfrombothsidesofthe
machine(Figure2).
Removethefuel-tankcapbeforeremovingthe
leftpod(Figure2).
g253592
Figure2
1.Shoulderscrew
3.Fuel-tankcap
2.Pod
2.Removethe2fuel-tankclipsfromtheunderside
ofthefueltankandrotatethefueltanktothe
side(Figure3).
g253594
Figure3
1.Fueltank2.Fuel-tankclips
3.Removetheshoulderscrewandwasher
securingthetopofthedamper(Figure4).
4.Whileholdingthedamperstudinplaceusinga
wrench,removethelocknut(1/4inch)securing
thebottomofthedamper(Figure4).
g254332
Figure4
1.Shoulderscrew4.Stud
2.Washer
5.Locknut(1/4inch)
3.Damper
5.Securethetopofthenewdamperusingthe
previouslyremovedshoulderscrewandwasher
(Figure4).
Startbyhand-tighteningtheshoulderbolt,then
torqueitto565to1130N∙cm(50to100in-lb).
6.Securethebottomofthenewdamperusingthe
previouslyremovedlocknut(1/4inch)asshown
inFigure4.
7.Rotatethefueltankbackintopositionand
secureitusingthepreviouslyremovedfuel-tank
clips(Figure3).
2
8.Installeachpodusingthepreviouslyremoved3
shoulderscrewsfromeachside(Figure5).
Installthepreviouslyremovedfuel-tankcapon
theleftpod(Figure5).
g253591
Figure5
1.Shoulderscrew
3.Fuel-tankcap
2.Pod
9.Repeatthisprocedureontherightsideofthe
machine.
3
/