Fig.4: Slip the rest 5 brass buckles on the curtain over curtain tube (S2) and fold the curtain as showed in the
picture.
Fig.5: Uplift the curtain tube assembled wit h curtain (U) and insert on end of curtain tube to curtain tube
connector. (Please note that you must plug the curtain tube in the end of the connector so that you can
assemble other end of curtain tube easily)
Fig.6: Pull the curtain tube (S1/S2) on the opposite direction to make the spring fastener out and be put into
the hole of the curtain tube (S1/S2), Meanwhile, make sure the other end of curtain tube (S1/S2) be
inserted into the curtain tube connecter (R1) exactly.