Fig.4: Insert round end of Netting and Curtain Rods (T4) to the Curtain Middle Connector (T1).
(Curtain should hang on the inner side of the Netting and Curtain Rods, need to assembled
the tube which has Curtain firstly.)
Fig.5: Insert round end of Netting and Curtain Rods (T4) to the Curtain Left Connector (T2) and
Curtain Right Connector (T3). (Curtain should hang on the inner side of the Netting and Curtain Rods,
need to assemble the tube which has Curtain firstly.) Then repeat Fig. 4 and Fig. 5 to assemble
neighboring Netting and Curtain Rods. (On the corner area, need to hang the same curtain.)
Fig.6: Stick Netting or Curtain on Post Cover (6E).