Mr Handsfree blue XS User manual

User’s manual

Bluetooth

®

wireless headset

GB

F

NL

D

I

HU

E

HR

GR RU

DECLARATION OF CONFORMITY

We, the undersigned

Company: TE-GROUP nv

Address: Kapelsestraat 61, 2950 Kapellen - BELGIUM

declare, that the following equipment:

Product Name:

BLUE XS

Product Type: Bluetooth

®

headset

Is in conformity with the Directions of the European Union

EC R&TTE Directive 1999/5/EC

EC Low Voltage Directive 72/23/EEC

EC EMC Directive 89/338/EEC

Conformity of the Bluetooth

®

headset with the above-mentioned directions is guaranteed by the CE-symbol.

100/240 V Travel charger

7

Adapter DC output

6

Volume button (+)

Indicator light

MF Button

Charger Connector

3

4

1

2

5

Volume button (–)

CONTENTS

GETTING STARTED ...............................................................................2

PAIRING THE HEADSET .......................................................................3

MAKING AND ANSWERING / ENDING CALLS ....................................4

TRANSFERRING / SWITCHING CALLS ..............................................4

CONNECTING WITH A PC OR PDA ......................................................5

TROUBLE SHOOTING ...........................................................................5

BLUETOOTH

®

........................................................................................6

2

GB

GETTING STARTED

CHARGING THE BATTERY

The mr Handsfree Blue XS headset comes with a rechargeable battery included. For first time use, it takes about 24

hours to fully charge the battery. Afterwards, it takes about 2 hours to fully charge the battery. When the battery is fully

charged, the talk time is 7 hours, and the stand-by time will be about 200 hours. The best performance of the Blue XS

battery is achieved by charging and discharging the unit completely for 3 times.

Plug the Travel Charger (7) into an AC outlet.  Connect the adapter (6) into the headset (5) as shown in the picture.

Gently press the adapter until it clicks into place.  The red indicator (1) on the headset will light up.  When the bat-

tery is fully charged, the red indicator (1) on the headset will turn off and the blue indicator (1) will turn on.

MAIN FUNCTIONS MULTIFUNCTIONAL AND VOLUME BUTTONS & RED/BLUE LED

INDICATOR

MF-Button (2):

 Power on/off

 Answer / end / transfer calls / voice dialing

 Pairing

Volume Button (3+4):

 Adjust volume

 Mute-function

 Redial

Red/Blue LED indicator (1):

Headset action Red/Blue indicator

During pairing Blue LED lights up constantly

Pairing successful Blue LED starts flashing every 4 seconds

Standby-mode Blue LED flashes every 4 seconds

Battery under charging Red LED is turned on constantly

Battery charged Red LED turns off and blue LED turns on

TURNING THE HEADSET ON/OFF

To turn the headset on:

Press and hold the MF- button (2) for 5 seconds.  You will hear 1 short tone and the blue indicator (1) of the headset

flashes.  The headset is now turned on.

To turn the headset off:

Press and hold the MF-button (2) for 4 seconds.  You will hear 1 short tone and the blue indicator (1) of the headset

lights up shortly.  The headset is now turned off.

3

GB

PAIRING THE HEADSET

You are required to pair the Blue XS headset with your mobile phone once before using it.

Each Blue XS headset has a default PIN-code 0000 for pairing, which is stored in its internal memory. You are usually

required to enter the PIN-code 0000 in a pairing process with a Bluetooth

®

mobile phone or other devices; however it

depends on the kind of Bluetooth

®

device that the headset is connected to.

The Blue XS headset must be turned off before initiating pairing.  Press and hold the MF-button (2) until the blue indi-

cator (1) lights up constantly.  The headset is now ready for pairing.  Initiate the pairing process on your Bluetooth

®

mobile phone to pair with the Blue XS headset. (Refer to the manual of your mobile phone.)  Select Blue XS out of

the list with found devices on your mobile phone.  You will be asked to enter the PIN-code to complete pairing, enter

0000 and confirm it.  When the pairing has been successful, the blue indicator (1) of the headset will flash every 4

seconds.

Note:

1. If the Blue XS headset is not in pairing mode, your mobile phone won’t find the headset. Please set the headset

into pairing mode before letting your mobile phone search for the headset.

2. If no pairing is possible for a period of time (approx. two minutes), the headset will automatically leave pairing

mode. You may need to start all over again.

3. Paired devices remain paired even when:

• One of the devices is not turned on.

• A service connection is interrupted or the service stopped.

• One or both devices are rebooted.

CONNECTION

In some cases the Blue XS can be disconnected from your phone and you will need to restore the connection.

• If the Blue XS has been switched off: Switch on the power and press the MF-button (2) for 1 second.

• If the mobile phone has been switched off: Turn on the mobile phone and restore the connection via the phone’s

menu.

• If one of the two devices has been out of range: Make sure that both devices are within working range and press

the MF-button (2) once.

Note:

For all mobile phone types, it is recommended to set “Trust” or “Authorized” for Blue XS in the Bluetooth

®

menu of your

mobile phone. Please refer to the manual of your mobile phone for more detailed information.

DISCONNECTION

You can disconnect the headset from your phone when, for example, you want to use another Bluetooth

®

device with

your phone. The Blue XS can be disconnected in the following ways:

1. Switch off the headset.

2. Disconnect the headset in the phone’s menu.

3. Move the phone more than 10 meters away from the headset.

4

GB

MAKING AND ANSWERING / ENDING CALLS

Once the Blue XS headset is successfully paired with your mobile phone, you can use it to make and receive calls. The

Blue XS headset can be used with voice dialing and redial if your mobile phone supports this feature. (Please check

the manual of your mobile phone).

MAKING CALLS

Using voice dialing:

Press the MF-button (2), wait for a beep and say the name of the person you want to call.  Press the MF-button (2)

again to cancel voice dialing.

Using the phone keys to make a call:

Enter and dial the number on the mobile phone as you normally do.  Once the call has been set up, the sound will

be transmitted to your headset automatically.

Redial:

Press and hold the volume-button - (3) for 3 seconds to redial the last number you called.

ANSWERING / ENDING CALLS

When the Blue XS headset is turned on and there is an incoming call, you will hear a musical tone.  Press the MF-

button (2) to answer the call or press and hold the MF-button (2) for 3 seconds to reject the call.  Adjust the headset

volume by pressing the + button (4) to increase the volume and pressing the - button (3) to decrease the volume. 

End the call by pressing the MF-button (2).

When the headset is turned off, press and hold the MF-button (2) for 5 seconds to turn the headset on.  Then press

the MF-button (2) again to answer the call.

Note:

Due to the different design of some mobile phones, an auto-disconnect may happen even when the Blue XS headset

is turned on. In that case, the headset won’t ring when there is an incoming call. Press the MF-button (2) for 1 sec. to

reconnect the headset with your mobile phone for an incoming call.

MUTE FUNCTION

During conversation, it is possible to mute the microphone.

Press and hold the volume-button + (4) until you hear a beep to activate the Mute function.  To disable the Mute

function, press the volume-button - (3) until you hear a beep.

TRANSFERRING / SWITCHING CALLS

To transfer a call:

Press and hold the MF-button (2) until you hear a beep to transfer the call to the mobile phone while talking on the

headset. The headset will be turned off.  If you want to transfer the call back to the headset, press the MF-button (2)

again for 5 seconds.

5

GB

To switch to a second call:

Press and hold the MF-button (2) for 3 seconds to switch to a second call during a call. This function only works when

your mobile phone service provider provides this service (check with your network provider).

CONNECTING WITH A PC OR PDA

You are allowed to connect the Blue XS headset with a Bluetooth

®

enabled PC or PDA that is supported with

headset and/or handsfree profiles. Please refer to the user manual of your Bluetooth

®

enabled PC or PDA for setup

information.

TROUBLE SHOOTING

1. There is no red indication while charging the bat-

tery (even if the Blue XS headset is connected to

the charger).

• For first time use, it could be that the battery capacity is

too low. It could take some time accordingly before

the red indicator lights up.

• When the headset has not been used for some time or

when the battery of the headset is empty, it could also

take some time before the red indicator lights up.

2. No sound contact between the Blue XS headset

and other devices.

• Make sure that the two devices have been paired.

• Make sure that the headset is turned on.

• Make sure that the two devices are within a working

range (10 m).

• Make sure that your mobile phone is within signal

strength.

• Some Bluetooth

®

mobile phones can support only

one Bluetooth

®

headset. Disconnection may hap-

pen when there is more than one headset paired

with your mobile phone.

3. Several Bluetooth

®

devices appear on my mobile

phone while searching the Blue XS headset.

Most Bluetooth

®

enabled mobile phones with Bluetooth

®

function activated can search for more than one Bluetooth

®

device within operative range. The headset will appear

as “Blue XS” on your mobile phone after having been

found by your mobile phone.

4. There is a disturbance noise coming from the

Blue XS headset.

The performance of the headset will be affected by two

factors:

• Whether your mobile phone is in a good signal

area. If your mobile phone is in weak signal area,

you won’t hear clearly with the headset.

• Whether it is in the operative range (10 m). The

headset will automatically try to reconnect within 90

seconds (this depends on your mobile phone).

6

GB

BLUETOOTH

®

The Bluetooth

®

word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TE-Group

NV is under license. Other trademarks and trade names are those of their respective owners.

TABLE DES MATI

È

RES

MISE EN ROUTE ....................................................................................2

ASSOCIATION DE L’OREILLETTE .......................................................3

APPELER ET RÉPONDRE / TERMINER DES APPELS .......................4

TRANSFÉRER UN APPEL / PRENDRE UN DEUXI

È

ÈME APPEL .........5

CONNECTER AVEC UN PC OU PDA ....................................................5

RÉSOLUTION DES PROBL

È

ÈMES .........................................................5

BLUETOOTH

®

........................................................................................6

Page is loading ...

INDICE

EMPEZAR ...............................................................................................2

ACOPLAMIENTO DEL AURICULAR .....................................................3

HACER Y CONTESTAR / TERMINAR LLAMADAS ..............................4

TRASPASO DE LLAMADAS / PASAR A UNA .....................................4

SEGUNDA LLAMADA ............................................................................4

CONECTAR CON UN PC O PDA ...........................................................5

SOLUCIÓN DE PROBLEMAS ................................................................5

BLUETOOTH

®

.........................................................................................6

Page is loading ...

TARTALOMJEGYZÉK

KEZDETI LÉPÉSEK ...............................................................................2

A FEJBESZÉLŐ PÁROSÍTÁSA .............................................................3

HÍVÁS INDÍTÁSA ÉS FOGADÁSA / BESZÉLGETÉS BEFEJEZÉSE ....4

HÍVÁSÁTIRÁNYÍTÁS / VÁLTÁS FOGADOTT HÍVÁSOK KÖZÖTT .....4

CSATLAKOZTATÁS PC-RE VAGY PDA KÉSZÜLÉKRE ......................5

HIBAELHÁRÍTÁS ...................................................................................5

BLUETOOTH

®

.........................................................................................6

Page is loading ...

SADRŽAJ

POČETAK RADA ...................................................................................2

UPARIVANJE NAGLAVNOG KOMPLETA ............................................3

NAZIVANJE I ODGOVARANJE NA POZIV / ZAVRŠETAK

RAZGOVORA ........................................................................................4

PREUSMJERAVANJE / PREBACIVANJE S POZIVA

NA POZIV ...............................................................................................5

SPAJANJE NA PC ILI PDA ...................................................................5

OTKLANJANJE SMETNJI ....................................................................5

BLUETOOTH

®

........................................................................................6

Page is loading ...

Blue XS/07-08/V02

www.te-group.com

Mr Handsfree blue XS User manual

Related papers

Other documents