2. Velleman
  3. K8060
K8060

Velleman K8060 Operating instructions

  • I have reviewed the user manual for the MCM Electronics Multicomp Center Tapped Transformer model 287-1070. This manual provides instructions for connecting the transformer to provide a split power supply of -25/0/+25VAC, particularly for amplifiers. It details connection points for both primary and secondary leads and warns about the risks of dealing with lethal voltages. I am able to answer your questions about the transformer and its connection.
  • What voltage does this transformer provide?
    What is the model of this transformer?
    Which leads connect to SK4?
    Which leads can be connected to 115VAC?
Connection of Multicomp Center Tapped Transformer
This amplifier requires a split power supply that
provides –25 / 0 / +25VAC.
MCM Electronics recommends our Multicomp Toroidal
transformer, Model 287-1070. This device provides the
correct voltage and sufficient current to power this
amplifier effectively. See below for connection information.
NOTE:
As you are dealing with potentially lethal voltages
It is the users responsiblilty to ensure safety while
Building and using this device.
Connect the RED secondary lead to SK4
Connect the BLACK secondary lead to SK6
Connect the YELLOW secondary lead to SK5
Connect the ORANGE secondary lead to SK3
Connect either the brown and violet leads OR
the gray and blue leads to your 115VAC power
source. DO NOT CONNECT BOTH.
See the following two pages for detail on the connection
locations.
www.mcmelectronics.com/product/287-1070
www.mcmelectronics.com
/