stellar labs 555-11690 Operating instructions

Laptop / Projector Stand

Model #555-11690

Overview:

The design of this versatile, heavy duty stand makes it

not only great for holding sheet music, but holding a

laptop or projector for presentation purposes as well.

Spring loaded adjustment handle

• Raised metal lip surrounds the stand for secure

placement of laptop or projector

• Heavy-duty steel construction

• Adjustable from 36"~60" tall

• Folds for easy transport and storage

• Tray dimensions: 13¾ " x 12"

Instructions:

1. Empty contents of box.

2. Loosen the knob on the tripod base and extend to desired base width, then tighten the knob

to lock in place.

3. Take the pole unit and insert it into the top of the tripod unit, and tighten.

4. Remove the bolt, knob, and washer assembly at the top of the pole unit.(remember which

way you removed the bolt.)

5. Align the pegs on the tray unit with the guides on the stand and slide the tray into place.

6. Insert the bolt through the hole in which you removed with the same orientation.

7. Place the washer and the knob on the end of the bolt in that order and tighten the tray at the

desired angle.

8. Adjust the stand’s height by loosening the knob in the middle of the pole and pulling/pushing

it in the direction desired, tighten when finished.

Warranty:

Stellar Labs products are warranted, by MCM Electronics, against manufacturer defects for a period

of two years from the original date of purchase. This warranty is limited to manufacturer defects, in

either materials or workmanship. MCM Electronics, or any other worldwide divisions of Premier

Farnell PLC, are not responsible for any consequential or inconsequential damage to any other

component, structure or the cost of installation or removal of said items.

Distributed exclusively by:

MCM Electronics

www.mcmelectronics.com