Heavy-Duty Keyboard Stand
Model #555-13812
Overview:
Sturdy adjustable keyboard stand allows for easy
transportation and provides a sturdy base for your
keyboard.
• Spring loaded adjustment handle
• Double arm 1" square and tube steel construction
• Nonskid rubber floor protectors
• Adjustable height: 26" ~ 39" (H)
• Adjustable width: 11½" ~ 32" (W)
• Overall length (when folded): 40½"
Instructions:
1. Empty contents of box.
2. Take the base unit of the stand and orient it where the Stellar Labs logo is on the right bottom
leg.
3. Pull the knob at the center of the base unit outward.
4. While the knob is pulled, pull the top of the back leg to the left.
5. Using the allen key, remove the screws at the bottom of each leg.
6. Align the holes of the bar style feet in a perpendicular fashion on each leg.
7. Using the allen key insert and tighten the screws on each leg.
8. Adjust the stand by pulling the knob and pulling or pushing the top legs of the stand.
Warranty:
Stellar Labs products are warranted, by MCM Electronics, against manufacturer defects for a period
of two years from the original date of purchase. This warranty is limited to manufacturer defects, in
either materials or workmanship. MCM Electronics, or any other worldwide divisions of Premier
Farnell PLC, are not responsible for any consequential or inconsequential damage to any other
component, structure or the cost of installation or removal of said items.
Distributed exclusively by:
MCM Electronics
www.mcmelectronics.com
/
