J2
© 2008 AS America Inc.
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
FINISHED
WALL
206mm
(8-1/8)
C/L
508mm
(20)
108mm
(4-1/4)
10mm
(3/8)
203mm
(8)
140mm
(5-1/2 REF.)
552mm
(21-3/4)
70mm
(2-3/4)
660mm
(26)
PEDESTAL ANCHORING
SCREW HOLES
8mm (5/16) DIA.
PEDESTAL
TO WALL
CLEARANCE
FINISHED
FLOOR
210mm
(8-1/4)
260mm
(10-1/4)
19mm (3/4) DIA.
HOLES FOR
ANCHOR BOLTS
DRAIN
CHASE
203mm
(8)
1-1/4 O.D
TAILPIECE
1-1/4 O.D.
WASTE
SUPPLIES
AS REQ'D
178mm
(7)
864mm
(34)
REF.
597mm
(23-1/2)
400mm
(15-3/4)
PEDESTAL
SIDE SECTION
178mm
(7)
546mm
(21-1/2)
*
*
REMINISCENCE™
PEDESTAL SINK
VITREOUS CHINA
REMINISCENCE™ PEDESTAL SINK
• Vintage-styled basin with raised motif backsplash
and design-coordinated pedestal
• Made from vitreous china
• Rear overow
• Supplied with mounting kit
• Design matched to Reminiscence toilet
• Faucet ledge
Shown with 3801.452 Amarilis Jasmine faucet
and handles (not included)
❏ 0211.800 Faucet holes on 8" (203mm) centers
(Illustrated)
❏ 0211.400 Faucet holes on 4" (102mm) centers
❏ 0211.100 Center hole only
Nominal Dimensions:
660 x 508 x 864mm
(26" x 20" x 34")
Separate Components:
❏ 0211.008 Pedestal top-8" (203mm) centers
❏ 0211.004 Pedestal top-4" (102mm) centers
❏ 0211.001 Pedestal top-center hole only
❏ 734900-400 Pedestal only
Bowl sizes:
476mm (18-3/4") wide
292mm (11-1/2") front to back
133mm (5-1/4") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
Revised 2/08
-
1
American Standard 0211.400 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
American Standard 0268008.020 User guide
-
-
American Standard 0268.400.222 User manual
-
-
-
-
-
American Standard 0230.400 User manual
-
-