American Standard 5065.040 User manual

Brand: American Standard

Model: 5065.040

Type: User manual

This manual is also suitable for

Traditional Bidet 5065.010

TRADITIONAL BIDET

VITREOUS CHINA

TRADITIONAL BIDET

❑ 5065.040 For deck-mounted tting (illustrated)

• Vitreous china

• Flushing rim and vertical cleansing spray

• Design matched to Reminiscence and

Eneld toilets

• Two bolt caps

• Integral overow

Shown with 8391.000 Amarilis bidet tting with

0000.452 Jasmine metal cross handles

(not included)

❑ 5065.010 For over-the-rim tting

• Vitreous china

• Punched for single hole, over-the-rim tting,

less ushing rim and spray

• Design matched to Reminiscence and

Eneld toilets

• Integral overow

• Two bolt caps

Nominal Dimensions:

600 x 406 x 394mm

(26" x 16" x 15-1/2")

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures

Revised 2/08

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver

❏ Fawn Beige ❏ Black

❏ Bidet Fitting*:

❏ Fitting Finish:

❏ Trap:

❏ Supplies with Stops:

* See faucet section for additional models available

NOTES:

DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES ARE SUGGESTED.

▲ WALL OUTLET INSTALLATION REQUIRES:

- A TRUE 1-1/4" BODIED “P” TRAP,; DO NOT USE A UNIVERSAL 1-1/4 X

1-1/2" TRAP.

- WALL OUTLET INSTALLATION.

- DRAIN TAILPIECE MUST BE CUT TO 1-1/2" LENGTH FOR WALL

OUTLET CONNECTION.

■ THRU-FLOOR OUTLET INSTALLATION (ALTERNATE).

“P” TRAP AND FITTINGS NOT FURNISHED WITH BIDET AND MUST BE

ORDERED SEPARATELY. BIDET FITTING HAS TRANSFER VALVE FEATURE.

IMPORTANT: Dimensions of xtures are nominal and may vary within the

range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided leaet.

660mm

(26)

413mm

(16-1/4)

76mm (3)

102mm

(4)

178mm

(7)

140mm

(5-1/2)

394mm

(15-1/2)

178mm

(7)

3/8 FLEX C.W.T.

SUPPLIES FROM

FITTING

1-1/4 O.D. TAILPIECE

(FOR THRU FLOOR

TRAPPING ONLY)

1-1/4 O.D. TAILPIECE

(FOR WALL DRAIN

OUTLET ONLY)

1-1/4 O.D. WASTE OUTLET

3/8 N.P.T.

SUPPLIES

C/L OF BIDET

406mm

(16)

FOOT

OUTLINE

OFFSET

WASTE

C/L

268mm

(10-1/2)

127mm

(5)

76mm

(3) MIN.

29mm

(1-1/8)

286mm

(11-1/4)

VIEW "A" - "A" (WALL SUPPLIES/OUTLET DETAIL)

29mm (1-1/8) OFFSET

"A"

FINISHED

WALL

FINISHED

FLOOR

FINISHED

FLOOR

1-3/4 DIA.

DRAIN OUTLET

165mm

(6-1/2)

OVERFLOW

10mm (3/8) DIA.

MTG. HOLES (2) ON

178mm (7) CTRS

203mm

(8)

SPRAY

102mm

(4)

American Standard 5065.040 User manual

Brand: American Standard

Model: 5065.040

Type: User manual

This manual is also suitable for

Traditional Bidet 5065.010

Download PDF

report

American Standard 5065.040 User manual

This manual is also suitable for

American Standard 5065.040 User manual

Related papers

Other documents