2. Vinotemp
  3. VT-DIAMONDBIN

Vinotemp VT-DIAMONDBIN User guide

  • Hello! I am an AI chatbot trained to assist you with the Vinotemp VT-DIAMONDBIN User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1. Insert wood pegs into both side panels.
2. Connect top panels to the side panels using the wood
pegs.
3. With a Phillips head screwdriver, screw the top and
bottom panel into the side panels using the 12 screws
included.
4. Connect the two X panels together in an X pattern
as shown.
5. Place the assembled X panels into the nished frame.
If you have difculty doing this, loosen the screws on
the top, place the X panels in the frame and then
tighten the screws again.
ASSEMBLY INSTRUCTIONS
X-BINS (VT-DIAMONDBIN)
17621 S. Susana Road | Rancho Dominguez | CA | 90221 | www.vinotemp.com
1.800.777.8466 | Fax: 310.866.3310
Contents of Box:
12 Screws
8 Wood pegs
2 Side panels (smaller package)
2 Top/bottom panels (medium package)
2 X Panels (large package)
STEP 1, 2, & 3
STEP 4
STEP 5
FINISHED X-BIN
* A Phillips head screwdriver is required for asembly
/