Husky D6TC09002 is a versatile and durable pegboard back wall accessory designed to enhance the functionality of your Husky mobile workbench or for direct mounting to a wall. Its key features and use cases include:
Enhanced Storage Capacity:
- Provides additional storage space for tools, equipment, and accessories, freeing up valuable workbench or floor space.
Customizable Organization:
- Accommodates all standard size 1/8 in. and 1/4 in. peg hooks, allowing for customized storage solutions tailored to your specific needs.
Durable Construction:
- Made of sturdy steel with an industrial powder coating for durability and resistance to wear and tear.
Husky D6TC09002 is a versatile and durable pegboard back wall accessory designed to enhance the functionality of your Husky mobile workbench or for direct mounting to a wall. Its key features and use cases include:
Enhanced Storage Capacity:
- Provides additional storage space for tools, equipment, and accessories, freeing up valuable workbench or floor space.
Customizable Organization:
- Accommodates all standard size 1/8 in. and 1/4 in. peg hooks, allowing for customized storage solutions tailored to your specific needs.
Durable Construction:
- Made of sturdy steel with an industrial powder coating for durability and resistance to wear and tear.
Pre-assembly
TOOLS REQUIRED
Safety
goggles
HARDWARE INCLUDED
SPECIFICATIONS
AA
BB
Screw M6 x 12L
19
Self-drilling Screws 1/4 in. X 3/4 in. L
16
AA
BB
Maximum capacity 100 lbs
4
NOTE: Hardware not shown to actual size.
Part Description Quantity
Phillips
screwdriver
10 mm.
socket
1/8 in.
drill bit
Power
drill
Only needed for Assembly B
(Only needed for assembly B)
Only needed for Assembly B
Pre-assembly continued) (
HUSKYTOOLS.COM
PACKAGE CONTENTS
Please contact HUSKY for further assistance. 1-888-43-
Part Description Quantity
A Bottom Pegboard Panel 1
B Top Pegboard Panel 1
C Right Support Post 1
D Left Support Post 1
5
B
D
C
A
Assembly
M ounting the pegboard back wall to the
1.
Place the right support post (C) on the back side of the mobile
holes and secure the post using the four M6 screws (AA). Secure
6
A.
M odel SKU#1001-075-943 #HOTC5210B1AD,
WARNING: Use special care to not over-tighten any of the
H usky 52 in. 10-Dr Mobile Workbench
screws to avoid damage to the pegboard or mobile workbench.
workbench. Ensure the support post lines up with the four bottom
the post, but do not tighten the screws at this time so that the
support post has some movement.
C
AA
D
M odel SKU#1001-081-787 #75809AHR,
M odel SKU#1001-257-215 #HTBX105F,
Repeat step 1 for the left support post (D).
2.
NOTE: If the workbench comes with pre-installed
threads on each corner, it is not necessary to install the
self drilling screws (BB) into the four top holes of each
post. If the mobile workbench does not have pre-installed
threads on each corner, please refer to Assembly B.
Attach the bottom pegboard panel (A) to the right support post (C)
pegboard to the posts, but do not tighten at this time.
Attach the top pegboard panel (B) to the right support post (C)
pegboard to the posts, but do not tighten at this time.
5.
and left support post (D) using four M6 screws (AA). Secure the
6.
and left support post (D) using four M6 screws (AA). Secure the
A
C
D
B
C
D
AA
Ensure the front pegboard panels are flush. Using a Phillips-head
Carefully, tighten the eight M6 screws (AA) to secure the support
the screws to avoid damage to the mobile workbench.
Ensure the pegboard panel is flush and square, then carefully
to both support posts.
7.
screwdriver, tighten the three M6 screws (AA) to connect the
8.
9.
posts (C) and (D) to the mobile workbench. Do not over-tighten
tighten the eight M6 screws (AA) to secure the pegboard panels
AA
A
B
bottom panel (A) and top panel (B) together.
AA
Assembly (continued)
M ounting the pegboard back wall to the
1.
Place the right support post (C) on the back of the mobile
marker to mark the eight holes in the bottom plate which connect
Using a power drill and 1/8 in. drill bit, drill the eight marked
B.
7
Model#HOTC5211B1QBD, SKU#1000-031-149
WARNING: Use special care to not over-tighten any of the
Attaching this product to your mobile workbench requires drilling
the wood top or mobile workbench.
workbench. Ensure you drill on a level plane and only 3/4 in.
Repeat step 3 to drill the holes for the other support post (D).
Attach the right support post (C) to the back of the mobile
socket. Secure the post, but do not tighten the screws at this
Repeat step 5 to attach the left support post (D).
H usky 52 in. 11-Dr Mobile Workbench
screws to avoid damage to the pegboard or mobile workbench.
holes into the mobile workbench. Use special care not to damage
workbench. Use a Ensure the support post is flush and level.
the post to the mobile workbench. Remove the support post (C).
3.
holes into the sides of the wood top and metal corners of the
deep into the wood top and metal sides to avoid damage to
4.
5.
workbench using eight self-drilling screws (BB) and a 10 mm
time so that the support post has some movement.
6.
C
D
C
BB
D
BB
Repeat step 1 for the left support post (D).
2.
the mobile workbench.
Attach the bottom pegboard panel (A) to the right support post (C)
pegboard to the post, but do not tighten at this time.
7.
and left support post (D) using four M6 screws (AA). Secure the
A
C
D
AA
Assembly ( )continued
8
Attach the top pegboard panel (B) to the right support post (C)
pegboard to the post, but do not tighten at this time.
Ensure the front pegboard panels are flush. Using a Phillips-head
Carefully, tighten the sixteen self-drilling screws (BB) to secure
over-tighten the screws to avoid damage to the mobile
Ensure the pegboard panel is flush and square, then carefully
to both support posts.
8.
and left support post (D) using four M6 screws (AA). Secure the
9.
screwdriver, tighten the three M6 screws (AA) to connect the
10.
11.
the support posts (C) and (D) to the mobile workbench. Do not
workbench's wood top and steel corners.
tighten the eight M6 screws (AA) to secure the pegboard panels
B
C
D
AA
AA
A
B
bottom panel (A) and top panel (B) together.
Assembly (continued)
M ounting the Pegboard Panels
1.
On a flat level surface, align the long sides of the top panel (B)
screwdriver, to connect thetighten the three M6 screws (AA)
Locate the studs inside the wall where you wish to place the
9
C.
Place the attached pegboard panels on the wall in the desired
directly to a wall
and bottom panel (A) together and using a Phillips-head
panels together.
2.
pegboard and mark them.
3.
B
A
location and locate the peg holes over the marked studs on the
wall. Ensure the pegboard is level, then using a minimum 2.5 in.
long screw and 1/2 in. washer, secure the pegboard panels into
wall studs in all four corners at minimum.
NOTE: Hardware is not included to secure pegboard
AA
□
This steel product has been coated with industrial powder coating
Care and Cleaning
®
surface. Use a glass cleaner ( Windex or equivalent product) to
for a durable finish. To help protect this finish, do not allow harsh
chemicals such as oil or grease to remain on the powder coating
clean and maintain all powder coated surfaces.
panels to a wall.
Operation
The peg holes will accommodate all standard size 1/8 in. and 1/4 in.
peg hooks.
-
1
-
2
-
3
-
4
-
5
-
6
Husky D6TC09002 is a versatile and durable pegboard back wall accessory designed to enhance the functionality of your Husky mobile workbench or for direct mounting to a wall. Its key features and use cases include:
Enhanced Storage Capacity:
- Provides additional storage space for tools, equipment, and accessories, freeing up valuable workbench or floor space.
Customizable Organization:
- Accommodates all standard size 1/8 in. and 1/4 in. peg hooks, allowing for customized storage solutions tailored to your specific needs.
Durable Construction:
- Made of sturdy steel with an industrial powder coating for durability and resistance to wear and tear.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Craftsman 5-Drawer User manual
-
Vinotemp VT-DIAMONDBIN User guide
-
aiwen NW-BL12075 User manual
-
aiwen NW-BL75063 User manual
-
Hasbro Cool Tools Power Workbench Operating instructions
-
Seville Classics UltraHD LED Lighted Workcenter Assembly Instructions
-
Seville Classics UltraHD Pegboard Workcenter Assembly Instructions
-
Simpson Strong-Tie WBSK Installation guide
-
Dateline Workshop PR250 Installation guide
-
netthandelen 2494 User manual
