Page is loading ...
1
7
8
9
2
3
4
5
6
10
TEK Connect
Remote control
Quick Guide
1
Display
2
Program buttons
3
Volume buttons
4
Telephone buttons
Press
to take a call.
Press to terminate or
reject a call.
Press for about 5 se-
conds to turn the remote
control on/off.
5
Microphone opening
6
Key lock
7
Read out button
Press for about 7 seconds
to turn the hearing instru-
ments off.
Press any button to turn the
hearing instruments back
on.
This Quick-Guide overviews the general functions of the
Tek Connect remote control. It does not replace the User
Guide.
Refer to the Tek wireless enhancement User Guide for
general notes on safety, intended use and full instruc-
tions on the features of Tek.
Controls
Program number
Bluetooth connection
active
or
phone connection active
battery status of remote
control
/
key lock activated/ deac-
tivated
incoming call
active call
hearing instruments off
error
/ /
searching bluetooth audio
stream /
bluetooth audio stream
active /
direct audio stream active
/
volume up / volume down
/
treble up / treble down
sound balance /volume of
hearing instruments
battery status of left and
right hearing instrument
Wearing the Tek Con-
nect remote control
Watching television:
Telephoning:
Symbols
8
SoundBalance buttons
9
2.5 mm stereo socket
10
USB-socket for power
plug
Connect to a power supply
to charge the Tek Connect
remote control.
Pairing
Press
and hold
on the remote
control for about 7 seconds
Search in the menu of your phone
for other bluetooth devices.
„Tek Connect“ is the remote control.
Insert the PIN „0000“.
Telephoning
Press to accept the incoming call.
Speak into the microphone of the
remote control to talk.
Press to terminate the call.
Your hearing instruments switch
back to the hearing program you
used before taking the call.
Press to reject an incoming call.
Using the telephone
Before the phone and remote control can be connected
you need to:
activate the bluetooth function in your phone.
pair phone and remote control.
Connect the Transmitter
with the delivered ca-
bles and adapters to the
desired external device,
e.g. your TV.
(refer to graphic)
Select with the Tek Con-
nect remote control the
audio program. The blue
LED on the Transmitter
confirms when the Blue-
tooth audio link is esta-
blished. You can now hear
the sound of the TV over
your hearing instruments.
Using the Transmitter
11
12
14
13
15
www.siemens.com /hearing
Siemens Audiologische Technik GmbH
Gebbertstrasse 125
91058 Erlangen
Germany
Phone +49 9131 308 0
© Siemens AG, 06.2011 EM
Document No. A91SAT-00477-99T2-7600
Order/Item No. 104 177 97
Printed in Germany
Using the direct audio input
Connect the desired
device, e.g. your mp3-
Player, with the delivered
cables and adapters to
2.5 mm stereo plug of
the remote control.
Change to the audio pro-
gram.
The remote control shows
the symbol for direct
audio input. You can hear
the sound of your MP3-
Player over your hearing
instruments.
max.
10m (32ft)
11
On/off switch
12
Sound level
13
USB-socket for power
plug
14
2.5 mm stereo socket
15
LED
/
