TMI Products 57 Chevy Trifive Dash Installation guide

Brand
TMI Products
Model
57 Chevy Trifive Dash
Type
Installation guide

This manual is also suitable for

Dash Pad Installation Guide
A professional is recomened for
all TMI Products installs
Chevy Bel Air 57
TOOLS REQUIRED:
1. SCREW DRIVER
PARTS:
TMI PRODUCTS DASH PAD
Roof
Dash Pad
Step 1: The TMI Products dash pad cap will
roll hinge under the Front of your dash.
Then dash pad cap will slide nearly all the
way to the windshield.
Note: This will leave you with
enough room to see the factory dash
trim screw holes.
Step 2: The TMI Products dash pad uses
the lower windshield trim chrome to hold
it the dash in place. Simply install it using
the factory dash trim screws. The two
outer panels install rst then smaller
middle piece over the top where the two
meet.
1
PN: 99-0702-000
QP: 09-314 REV.01
Dash Trim Screws
A
B
2
Below is a side view of the dash pad cap
slidding on note that it will have to “Hook”
under dash.
Dash
Dash
Pad Cap
Pad Cap
  • Page 1 1

TMI Products 57 Chevy Trifive Dash Installation guide

Brand
TMI Products
Model
57 Chevy Trifive Dash
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents