2. TMI Products
  3. 55-56 Chevy Trifive Dash

TMI Products 55-56 Chevy Trifive Dash, 57 Chevy Trifive Dash Installation guide

  • Hello! I am an AI chatbot trained to assist you with the TMI Products 55-56 Chevy Trifive Dash Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Dash Pad Installation Guide
A professional is recomened for
all TMI Products installs
Chevy Bel Air 57
TOOLS REQUIRED:
1. SCREW DRIVER
PARTS:
TMI PRODUCTS DASH PAD
Roof
Dash Pad
Step 1: The TMI Products dash pad cap will
roll hinge under the Front of your dash.
Then dash pad cap will slide nearly all the
way to the windshield.
Note: This will leave you with
enough room to see the factory dash
trim screw holes.
Step 2: The TMI Products dash pad uses
the lower windshield trim chrome to hold
it the dash in place. Simply install it using
the factory dash trim screws. The two
outer panels install rst then smaller
middle piece over the top where the two
meet.
1
PN: 99-0702-000
QP: 09-314 REV.01
Dash Trim Screws
A
B
2
Below is a side view of the dash pad cap
slidding on note that it will have to “Hook”
under dash.
Dash
Dash
Pad Cap
Pad Cap
/