2. exhart
  3. 14213-RS

exhart 14213-RS Operating instructions

  • Hello! I have reviewed the assembly instructions for the Exhart Rain Gauge 14213-RS. This document details the simple two-step process for setting up the garden stake, including attaching the rain gauge to the top pole and then securing the stake base. It emphasizes placing the stake firmly and vertically in the ground. I'm ready to answer any questions you might have about its assembly or intended use.
  • How do you attach the rain gauge to the top pole?
    How do you attach the stake base?
    What is the recommended installation angle?
Step 1:
Attach rain gauge (B) to top pole (A) by inserting it through the opening.
Top Pole Rain Gauge Stake Base
Step 2:
Attach stake base (C) to top pole (B) (the result of step 1) by screwing it to the right until it is firmly tightened. When
everything is assembled, insert stake base firmly into the ground. For best results, install on flat ground and ensure
that the stake is 90 degrees vertical to the ground.
Note:
Product (Top Pole) will vary depending on the item purchased.


FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.
© 2020 Exhart - Chatsworth, CA 91311. Made in China / Fabrique en Chine. All Rights Reserved.
For help please call 1-800-775-5503 | [email protected]
exhart.com
14213-RS
/