Tyan Transport GT20 B5350 Service User manual

Category
Server barebones
Type
User manual
Transport GT20
B5350
Service Engineers Manual
PREFACE
Copyright
This publication, including all photographs, illustrations, and soft-
ware, is protected under international copyright laws, with all rights
reserved. Neither this manual, nor any material contained herein,
may be reproduced without written consent of the manufacturer-.
Copyright 2005
Version 1.0
Disclaimer
Information contained in this document is furnished by TYAN Com-
puter Corporation and has been reviewed for accuracy and reliability
prior to printing. TYAN assumes no liability whatsoever, and dis-
claims any express or implied warranty, relating to sale and/or use of
TYAN products including liability or warranties relating to fitness for
a particular purpose or merchantability. TYAN retains the right to
make changes to product descriptions and/or specifications at any
time, without notice. In no event will TYAN be held liable for any
direct or indirect, incidental or consequential damage, loss of use,
loss of data or other malady resulting from errors or inaccuracies of
information contained in this document.
Trademark Recognition
All registered and unregistered trademarks and company names
contained in this manual are property of their respective owners
including, but not limited to the following.
TYAN and Transport GT20 B5350 are trademarks of TYAN Com-
puter Corporation.
Intel, Xeon, and combinations thereof are trademarks of Intel Corpo-
ration.
Phoenix, PhoenixBIOS, and combinations thereof are trademarks of
Phoenix Technologies.
Microsoft Windows is a trademark of Microsoft Corporation.
IBM, PC, AT, PS/2 are trademarks of IBM Corporation.
Winbond is a trademark of Winbond Electronics Corporation.
Portable Document Format (PDF) is a trademark of Adobe Corpora-
tion.
ii
Federal Communications Commission (FCC)
Notice for the USA Compliance Information State-
ment (Declaration of Conformity Procedure) DoC FCC
Part 15: This device complies with part 15 of the FCC
Rules
Operation is subject to the following conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received including inter-
ference that may cause undesired operation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
Plug the equipment into an outlet on a circuit different from
that of the receiver.
Consult the dealer on an experienced radio/television technician for
help.
Notice for Canada
This apparatus complies with the Class B limits for radio interference
as specified in the Canadian Department of Communications Radio
Interference Regulations. (Cet appareil est conforme aux norms de
Classe B d’interference radio tel que specifie par le Ministere Cana-
dien des Communications dans les reglements d’ineteference
radio.)
Notice for Europe (CE Mark) This product is in conformity
with the Council Directive 89/336/EEC, 92/31/EEC
(EMC).
CAUTION: Lithium battery included with this board. Do not puncture,
mutilate, or dispose of battery in fire. Danger of explosion if battery
is incorrectly replaced. Replace only with the same or equivalent
type recommended by manufacturer. Dispose of used battery
according to manufacturer instructions and in accordance with your
local regulations.
iii
About this Manual
This manual provides you with instructions on installing your
Transport GT20. This manual is intended for experienced users and
integrators with hardware knowledge of personal computers.
This manual consists of the following parts
Chapter 1: Provides an Introduction to the Transport GT20
B5350 bare-bones, packing list, describes the
external components, gives a table of key compo-
nents, and provides block diagrams of the system.
Chapter 2: Covers procedures on installing the CPU, mem-
ory modules, an optional PCI-X card, and hard
drives.
Chapter 3: Covers removal and replacement procedures for
pre-installed components
Appendix: Describes the differences between mainboard
BIOS and system BIOS. The cable connection
tables are also provided for reference of system
setup.
For information on the mainboard, please refer to the attached main-
board users manual. You can find the detailed description about
jumper and BIOS settings from the motherboard manual.
iv
SAFETY INFORMATION
Before installing and using the Transport GT20, take note of the fol-
lowing precautions:
Read all instructions carefully.
Do not place the unit on an unstable surface, cart, or stand.
Do not block the slots and opening on the unit, which are pro-
vided for ventilation.
Only use the power source indicated on the marking label. If
you are not sure, contact the Power Company.
The unit uses a three-wire ground cable, which is equipped
with a third pin to ground the unit and prevent electric shock.
Do not defeat the purpose of this pin. If your outlet does not
support this kind of plug, contact your electrician to replace
your obsolete outlet.
Do not place anything on the power cord. Place the power
cord where it will not be in the way of foot traffic.
Follow all warnings and cautions in this manual and on the
unit case.
Do not push objects in the ventilation slots as they may touch
high voltage components and result in shock and damage to
the components.
When replacing parts, ensure that you use parts specified by
the manufacturer.
When service or repairs have been done, perform routine
safety checks to verify that the system is operating correctly.
Avoid using the system near water, in direct sunlight, or near
a heating device.
Cover the unit when not in use.
v
Table of Contents
Chapter 1:Overview
1.1 About the Transport GT20 B5350 . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Product Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.4 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.5 About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.5.1 Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
1.5.2 Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.5.3 LED Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.5.4 Internal View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
1.5.5 Motherboard Block Diagram. . . . . . . . . . . . . . . . . . . . . . . 11
1.5.6 Motherboard Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Chapter 2:Setting Up
2.0.1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.0.2 Work Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.0.3 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.0.4 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.1 Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.1.1 Installing the Server in a Rack. . . . . . . . . . . . . . . . . . . . . .17
2.2 Installing Motherboard Components. . . . . . . . . . . . . . . . . . . . . . . 21
2.2.1 Removing the Chassis Cover. . . . . . . . . . . . . . . . . . . . . . . 21
2.2.2 Installing the CPU, Heatsink and Air Duct . . . . . . . . . . . . 22
2.2.3 Installing the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2.2.4 Installing the Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2.3 Installing the Hard Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2.4 Installing the Slim FDD (Option) . . . . . . . . . . . . . . . . . . . . . . . . . 30
Chapter 3:Replacing Pre-Installed Components
3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
3.1.1 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
3.1.2 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
3.1.3 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3.2 Disassembly Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
3.3 Removing the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3.4 Replacing Motherboard Components . . . . . . . . . . . . . . . . . . . . . . 37
3.4.1 Disconnecting All Motherboard Cables . . . . . . . . . . . . . . 37
3.4.2 Removing the Motherboard. . . . . . . . . . . . . . . . . . . . . . . . 41
3.5 Replacing the Slim CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
3.6 Replacing the LED Control Board . . . . . . . . . . . . . . . . . . . . . . . .44
vi
3.7 Replacing the M1010 Adapter Board . . . . . . . . . . . . . . . . . . . . . .46
3.7.1 M1010 Adapter Board Features for B5350 . . . . . . . . . . . . 47
3.7.2 System Fan Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
3.7.3 M1010 Adapter Board Connector Pin Definition . . . . . . . 50
3.8 Replacing the SATA Backplane . . . . . . . . . . . . . . . . . . . . . . . . . .55
3.8.1 SATA Backplane Features. . . . . . . . . . . . . . . . . . . . . . . . .57
3.9 Replacing the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Appendix I: BIOS Differences
Appendix II: Cable Connection Tables
Technical Support
Chapter 1: Overview 1
Chapter 1: Overview
1.1 About the Transport GT20 B5350
Congratulations on your purchase of the TYAN Transport
TM
GT20 (B5350), a highly-optimized rack-mountable barebone
system. The Transport GT20 (B5350) offers the latest in dual
processor server systems, providing a rich feature set and
incredible performance. Leveraging advanced technology
from Intel
®
, the Transport GT20 (B5350) based server sys-
tem are capable of offering scalable 32 and 64-bit computing,
high-bandwidth memory design, and a lightning-fast PCI-X
bus implementation. The Transport
TM
GT20 (B5350) not only
empowers your company in today’s demanding IT environ-
ment but also offers a smooth path for future application
usage.
TYAN is also proud to deliver the Transport
TM
GT20 (B5350)
in SATA flavor while supporting up to four (4) hot-swap hard
drives, one (1) slim CD-ROM and one (1) optional slim floppy
disk drive (not included). The Transport
TM
GT20 (B5350)
uses TYAN’s latest tooling-made chassis featuring a robust
structure, tool-less and modularized design, and a solid
mechanical enclosure. All of this provides the Transport
TM
GT20 (B5350) the power and flexibility to meet the needs of
nearly any server application.
1.2 Product Models
Model HDD Bays
Hot-Swap
Support
HDD
Backplane
B5350G20S4H
Removable,
4 HDDs
Yes 4-por t SATA
B5350G20S2H
Removable,
2 HDDs
Yes 2-por t SATA
B5350G20S4
Internal (Fixed),
4 HDDs
No No
2 Chapter 1: Overview
B5350G20S4H
B5350G20S2H
B5350G20S4
Chapter 1: Overview 3
1.3 Features
Enclosure
Industry 19” rack-mountable 1U
chassis storage bay
(4) or (2) 3.5” HDD bays
(1) slim line CD-ROM bay
Dimension: D 22.4 x W 17.2 x H
1.72 inch (568x436x43.6mm)
Processors
Dual mPGA 604-pin ZIF sockets
Supports one or two Intel
®
Xeon
TM
(Nocona) processors, FSB 800MHz
Chipset
Intel
®
Lindenburst-VS (E7320)
MCH
Intel
®
Hance Rapids (6300ESB)
South Bridge
SMSC DME1737 LPC I/O chip
Analog Devices ADM1027 or
SMSC6D102 Hardware Monitoring
IC
Memory
Dual channels, 8 DIMM sockets
Supports up to 6 DDR-333 or 8
DDR-266
Supports up to 16 Gigabyte Regis-
tered DDR
Supports ECC type memory mod-
ules
Expansion Slots
One 64-bit 66MHz PCI-X slot on
riser card (riser card model: M2055)
Back I/O Ports
Stacked PS/2 mouse & keyboard
ports
Stacked two USB 2.0 ports
One 9-pin UART serial port
One 15-pin VGA port
Two RJ45 connectors
Front Panel Features
I/O
(2) USB 2.0 ports
LED indicators
Power LED
(2) LAN LEDs
HDD active LED
System fail LED
Switches
Power switch
Reset switch
Integrated Storage Controller
Dual channel IDE (CD-ROM)
Supports UDMA 100/66/33 IDE
drives and ATAPI -compliant
devices
M8110 SO-DIMM SATA card for
B5350G20S4H sku
Adaptec AIC-8110 SATA control-
ler
Supports up to 4-port SATA run-
ning at 1.5Gb/sec
Adaptec Host RAID support with
RAID 0, 1, 10
Integrated Serial ATA (6300ESB)
Supports 2 ports SATA, RAID 0,1
Storage
Pre-installed slim type 24x CD-ROM
Hard Disk Drives
B5350G20S4H: (4) hot-swappa-
ble, SATA HDD with RAID 1,0, 10
B5350G20S2H: (2) hot-swappa-
ble SATA HDD with RAID 1, 0
B5350G20S4: (4) Internal HDD
Networking
2 Gigabit Ethernet ports (Broadcom
BCM5721 PCI-E GbE LAN control-
ler connected MCH), with teaming
feature support
Video
•ATI
®
RAGE
TM
XL PCI graphics
controller
8MB Frame Buffer of video memory
Motherboard
Tyan Tiger i7320 S5350G2NR-1U
system board
ATX footprint (10.2”’ x 12”)
Power Supply
EPS 12V, 1U, 500W with PFC
100V~240V AC input
4 Chapter 1: Overview
System Cooling
Five 40x40x28mm 15000rpm
heavy-duty fans
Two passive CPU heatsinks
Regulatory
FCC Class B (Declaration of Con-
formity)
CE (Declaration of Congormity)
Server Management
System fan speed control and moni-
toring
Chassis intrusion alert
Supports Tyan Server Management
(TSM)
Environment Temperature
Operating temperature 5
o
C~35
o
C
Non-operating temperature -40
o
C ~
70
o
C
Chapter 1: Overview 5
1.4 Unpacking
If any items are missing or appear damaged, contact your
retailer or browse to TYAN’s Web site for service:
http://www.tyan.com.
The Web site also provides information on other TYAN prod-
ucts, plus FAQs, compatibility lists, BIOS settings, and more.
FDDs
1 x Tyan driver CD
SMDC Kit
Power Cables
Left to right: Europe, US
HDD Screws
Mounting Ears & Screws
FDD Kit
FDD Cable
FDD Backplane Cable
FDD Rails & Screws
6 Chapter 1: Overview
.
Mainboard Manual
Barebone Manual
Heatsink x 2
Rail Kit
Mounting Bracket x 4
Sliding Rail x 2 & Bracket x 4
Screws Kit
Chapter 1: Overview 7
1.5 About the Product
The following views show you the product.
1.5.1 Front View
*Reserved: reserved for future upgrade
1.5.2 Rear View
CD-ROM Drive
Hard Drive Bay x 4
HDD activity LED
Power switch
Power LED
Reset
switch
USB ports
Warning LED
LAN LEDs
*Reserved
Power Supply Socket
PS/2 Mouse/Keyboard Ports
Serial Port
VGA Port
LAN Port x 2
PCI-X Slot
USB Port
Power Supply LED
8 Chapter 1: Overview
1.5.3 LED Definition
Front Panel
Rear I/O LED
LED Color State Description
Power Green
OFF
ON
OFF
Power ON
Power OFF
HDD Activity Amber
OFF
Radom Blink
OFF
HDD access activity
No disk activity
LAN1/LAN2 Activity Green Blink LAN access activity
Warning Red
OFF
ON
OFF
1. In DOS OS: Fan Fails
2. In Window OS: Fan
Fails or System/CPU
Overheat (Need to install
Tyan TSM AP to get this
feature. Users can use
TSM to configure the
warning condition.)
Normal
Hot Swappable HDD
Tray Power LED
Green
OFF
ON
OFF
Power connected
Power disconnected
Hot Swappable
HDD Tray Access
LED
Reserved LED for future upgrade. It is not functional in
the B5350 barebone now.
LED Color State Description
RJ45 NIC1 Linkage
(Left Side)
Green
Green
OFF
ON
Blinking
OFF
LAN linked
LAN accessing
No LAN linked
RJ45 NIC1 Mode
(Right Side)
Amber
Green
OFF
ON
ON
OFF
Gigabit mode
100M mode
10M mode
RJ45 NIC2 Linkage
(Left Side)
Green
Green
OFF
ON
Blinking
OFF
LAN linked
LAN accessing
No LAN linked
Chapter 1: Overview 9
NOTE: “Right” or “Left” is viewed from the rear.
RJ45 NIC2 Mode
(Right Side)
Amber
Green
OFF
ON
ON
OFF
Gigabit mode
100M mode
10M mode
Delta Power
Supply LED
Green
Green
Amber
Amber
OFF
ON
1Hz Blinking
ON
1Hz Blinking
OFF
Output ON and OK
AC present/Only 5Vsb ON
Power supply critical event
causing a shutdown: fail-
ure, OCP, OVP, fan fail
Power supply warning
event where the power
supply continues to oper-
ate: high temp., high
power, high current, slow
fan
No AC power
10 Chapter 1: Overview
1.5.4 Internal View
1
2
5
13
11
12
6
7
8
9
1. PCI-X Slot
2. Link Bar
3. Memory Slots
4. Power Connectors
5. EPS 12V Power Supply
6. Air Duct
7. Fans
8. M1010 Adapter Board
9. SATA Backplane
10. LED Control Board Cable
11. M8110 TARO SO-DIMM
SATA card
12. SATA Cable
13. CD-ROM Cable
14. USB Cable
15. Four SATA HDDs
34
10
15
14
Chapter 1: Overview 11
1.5.5 Motherboard Block Diagram
PRINTER
HEADER
SERIAL
HEADER
SERIAL
PORT
KBD
PORT
FLOPPY
CONN
SUPER-I/O
DME1737
Intel
6300ESB
Intel
E7320
MCH
NOCONA NOCONA
ADM1027
BIOS
8Mb
ATI
RAGE XL
BCM5721 GLAN
BCM5721 GLAN
CPU1 VRD
CPU0 VRD
95'
''53:5
95'
''57(50
SO-DIMM 200
CK409B
CLOCK
SYNTH
DRVR
DB800
BUFFER
FAN x 4
CPU_FAN1
CPU_FAN2
CHASSIS_FAN
LPC BUS
LPC BUS
PCI 32/33MHz
8MB DISPLAY
MEMORY
CRT CONN
PCI 32/33MHz SLOTs
PCI-X SLOT
DDR 266/333 ECC REGISTERED DIMMs A
DDR 266/333 ECC REGISTERED DIMMs B
MEM CNTRL AND DATA
MEM CNTRL AND DATA
HOST BUS 800
PCI-EX 1
PCI-EX 1
PRIMARY
IDE CONN
SECONDARY
IDE CONN
SATA
CONNx2
USB REAR
CONNx2
USB FRONT
CONNx2
HI 1.5
SERVER
MGMT
CONN
FIRMWARE
HUB
FAN x 2
12 Chapter 1: Overview
1.5.6 Motherboard Layout
S5350
1
J4
USB1
J3
(COM1)
J2
(VGA)
CPUFAN1
PW1
LAN1
BIOS
Intel
6300ESB
SATA1
SATA2
FDD1 J5
J22
1
SMSC
DME1737
64-bit 66MHz PCI-X PCIX-P1
LAN2
ATI
RAGE XL
LPT1
USB2
SMDC J21
BATT
Intel
E7320
IDE2 J23
PW2
SO_DIMM PCIX-P3 J19(Optional)
1
FAN3
1
FAN7
JP4
1
J36
JP7
1
CPU1
1
FAN2
FAN1
1
CPU2
FAN6
1
JP22/27
COM2
JP16
1
JP21
JP24
JP32
LED1
1
JP8
CPUFAN2
FAN5
FAN4
1
JP25
JP30
JP37
1
1
1
JP39
JP18
JP29
JP13
JP15
1
1
JP28
JP1
1
J20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78

Tyan Transport GT20 B5350 Service User manual

Category
Server barebones
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI