Tyan Transport GT20 B5151 User manual

Brand: Tyan

Model: Transport GT20 B5151

Category: Server barebones

Type: User manual

Transport GT20

B5151

Service Engineer’s Manual

PREFACE

This publication, including all photographs, illustrations, and soft-

ware, is protected under international copyright laws, with all rights

reserved. Neither this manual, nor any material contained herein,

may be reproduced without written consent of the manufacturer-.

Version 1.0

Disclaimer

Information contained in this document is furnished by TYAN Com-

puter Corporation and has been reviewed for accuracy and reliability

prior to printing. TYAN assumes no liability whatsoever, and dis-

claims any express or implied warranty, relating to sale and/or use of

TYAN products including liability or warranties relating to fitness for

a particular purpose or merchantability. TYAN retains the right to

make changes to product descriptions and/or specifications at any

time, without notice. In no event will TYAN be held liable for any

direct or indirect, incidental or consequential damage, loss of use,

loss of data or other malady resulting from errors or inaccuracies of

information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners

including, but not limited to the following.

TYAN and Transport GT20 B5151 are trademarks of TYAN Com-

puter Corporation.

Intel, Prescott, and combinations thereof are trademarks of Intel

Corporation.

Award, AwardBIOS are trademarks of Phoenix Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe Corpora-

tion.

Federal Communications Commission (FCC)

Notice for the USA Compliance Information State-

ment (Declaration of Conformity Procedure) DoC FCC

Part 15: This device complies with part 15 of the FCC

Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received including inter-

ference that may cause undesired operation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the

receiver.

– Plug the equipment into an outlet on a circuit different from

that of the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class B limits for radio interference

as specified in the Canadian Department of Communications Radio

Interference Regulations. (Cet appareil est conforme aux norms de

Classe B d’interference radio tel que specifie par le Ministere Cana-

dien des Communications dans les reglements d’ineteference

radio.)

Notice for Europe (CE Mark) This product is in conformity

with the Council Directive 89/336/EEC, 92/31/EEC

(EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. Danger of explosion if battery

is incorrectly replaced. Replace only with the same or equivalent

type recommended by manufacturer. Dispose of used battery

according to manufacturer instructions and in accordance with your

local regulations.

iii

About this Manual

This manual provides you with instructions on installing your

Transport GT20. This manual is intended for experienced users and

integrators with hardware knowledge of personal computers.

This manual consists of the following parts

Chapter 1: Provides an Introduction to the Transport GT20

B5151 barebone, packing list, describes the

external components, gives a table of key compo-

nents, and provides block diagrams of the system.

Chapter 2: Covers procedures on installing the CPU, mem-

ory module, PCI-X card, and hard drive.

Chapter 3: Covers removal and replacement procedures for

pre-installed components

Appendix: Describes the differences between mainboard

BIOS and system BIOS. The cable connection

tables are also provided for reference of system

setup.

For information on the mainboard, please refer to the attached main-

board user’s manual. You can find the detailed description about

jumper and BIOS settings from the motherboard manual.

SAFETY INFORMATION

Before installing and using the Transport GT20, take note of the fol-

lowing precautions:

– Read all instructions carefully.

– Do not place the unit on an unstable surface, cart, or stand.

– Do not block the slots and opening on the unit, which are pro-

vided for ventilation.

– Only use the power source indicated on the marking label. If

you are not sure, contact the Power Company.

– The unit uses a three-wire ground cable, which is equipped

with a third pin to ground the unit and prevent electric shock.

Do not defeat the purpose of this pin. If your outlet does not

support this kind of plug, contact your electrician to replace

your obsolete outlet.

– Do not place anything on the power cord. Place the power

cord where it will not be in the way of foot traffic.

– Follow all warnings and cautions in this manual and on the

unit case.

– Do not push objects in the ventilation slots as they may touch

high voltage components and result in shock and damage to

the components.

– When replacing parts, ensure that you use parts specified by

the manufacturer.

– When service or repairs have been done, perform routine

safety checks to verify that the system is operating correctly.

– Avoid using the system near water, in direct sunlight, or near

a heating device.

– Cover the unit when not in use.

Table of Contents

Chapter 1:Overview

1.1 About the Transport GT20 B5151 . . . . . . . . . . . . . . . . . . . . . . . . .1

1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.3 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.4 About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.4.1 Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.4.2 Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.4.3 LED Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.4.4 Internal View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.4.5 Motherboard Block Diagram. . . . . . . . . . . . . . . . . . . . . . . . 9

1.4.6 Motherboard Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 2:Setting Up

2.0.1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.0.2 Work Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.0.3 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.0.4 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.1 Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.1.1 Installing the Server in a Rack. . . . . . . . . . . . . . . . . . . . . .15

2.2 Installing Motherboard Components. . . . . . . . . . . . . . . . . . . . . . . 19

2.2.1 Removing the Chassis Cover. . . . . . . . . . . . . . . . . . . . . . . 19

2.2.2 Installing the CPU, Heatsink and Air Duct . . . . . . . . . . . . 20

2.2.3 Installing the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

2.2.4 Installing a PCI Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

2.3 Installing the Hard Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

2.4 Installing the Slim FDD (Option) . . . . . . . . . . . . . . . . . . . . . . . . . 29

Chapter 3:Replacing Pre-Installed Components

3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.1.1 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.1.2 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

3.1.3 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

3.2 Disassembly Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

3.3 Removing the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

3.4 Replacing Motherboard Components . . . . . . . . . . . . . . . . . . . . . .35

3.4.1 Disconnecting All Motherboard Cables . . . . . . . . . . . . . . 35

3.4.2 Removing the Motherboard. . . . . . . . . . . . . . . . . . . . . . . . 38

3.5 Replacing the Slim CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.6 Replacing the LED Control Board . . . . . . . . . . . . . . . . . . . . . . . .41

3.7 Replacing the M1010 Adapter Board . . . . . . . . . . . . . . . . . . . . . .43

3.7.1 M1010 Adapter Board Features. . . . . . . . . . . . . . . . . . . . . 45

3.7.2 System Fan Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

3.7.3 M1010 Adapter Board Connector Pin Definition . . . . . . .48

3.8 Replacing the SATA Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . 53

3.8.1 SATA Backplane Features. . . . . . . . . . . . . . . . . . . . . . . . . 55

3.9 Replacing the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Appendix I: BIOS Differences

Appendix II: Cable Connection Tables

Technical Support

Chapter 1: Overview 1

Chapter 1: Overview

1.1 About the Transport GT20 B5151

Congratulations on your purchase of the TYAN Transport

GT20 (B5151), a highly-optimized rack-mountable barebone

system. The Transport GT20 (B5151) offers the latest proces-

sor server system, providing a rich feature set and incredible

performance. Leveraging advanced technology from Intel

the Transport GT20 (B5151) server system is capable of

offering scalable 32-bit computing, high-bandwidth memory

design, and a lightning-fast PCI-X bus implementation. The

Transport

GT20 (B5151) not only empowers your company

in today’s demanding IT environment but also offers a

smooth path for future application usage.

TYAN is also proud to deliver the Transport

GT20 (B5151)

in SATA flavor while supporting up to four (4) hot-swap hard

drives, one (1) slim CD-ROM and one (1) optional slim floppy

disk drive (not included). The Transport

GT20 (B5151)

uses TYAN’s latest tooling-made chassis featuring a robust

structure, tool-less and modularized design, and a solid

mechanical enclosure. All of this provides the Transport

GT20 (B5151) the power and flexibility to meet the needs of

nearly any server application.

2 Chapter 1: Overview

1.2 Features

Enclosure

• Industry 19” rack-mountable 1U

chassis storage bay

• Storage bay support: Four 3.5”

removable HDD bays, Slim CD-

ROM drive, Slim FDD

• Dimension: D 22.4 x W 17.2 x H

1.72 inch (568 x 436 x 43.6mm)

Processors

• One Socket LGA775 Intel ® Pres-

cott® processor

• 800MHz FSB support

Chipset

• Intel E7221 MCH chipset

• Support for 800MHz FSB

• MCH+ICH6R+PXH-V

• SMSC DME1737 Super I/O chip

Memory

• 128-bit dual channel memory bus

• Four 184-pin DDR DIMM sockets

• Supports up to 4GB of DDR

333/400 SDRAM

• Supports Unbuffered, ECC/non-

ECC type memory modules

Expansion Slots

• One PCI-X, 64-bit 133/100/66MHz

bus support

• One TARO 200-pin SO-DIMM, PCI-

X 133/100/66 MHz support

Back I/O Ports

• One 9-pin COM port

• One 15-pin VGA port

• PS/2 mouse and keyboard ports

• Two USB 2.0 ports

• One RJ45 10/100 Ethernet port, two

RJ45 10/100/1000 Ethernet ports

Front Panel Features

• I/O

(2) USB 2.0 ports

• LED indicators

– One HDD LED, One LAN LED,

One Power LED

• Switches

– Power switch, Reset switch

Harware Monitoring

• Smart auto fan speed control

• Fan Monitoring

• CPU Thermal & Voltage Monitor

support

• Chassis intrusion header

Integrated LAN

• One 10/100 Ethernet LAN controller

– Intel 82551 PCI

• Two GbE LAN controllers

– Two Broadcom BCM5721 PCI

Express GbE LAN controllers

– Operating at (x1) PCI-E interface

– ASF 2.0 support

Integrated Graphic

• 8-bit VGA DAC embedded the Intel

E7721 MCH to support an analog

display.

Integrated Serial ATA (ICH6R)

• 4-port Serial ATA Host controller

embedded

• Supports four serial ports running at

1.5Gb/s

• RAID 0.1 support

Storage

• 4 hot-swappable SATA HDD bays

• Optional slim line DVD-ROM and

FDD

Server Management

• Supports TYAN Server Manage-

ment (TSM)

• Optional TYAN SMDC IPMI V1.5

server management

Power Supply

• EPS 12V, 1U, 350W with PFC

• 100V~240V AC input

Regulatory

• FCC Class B (Declaration of Con-

formity)

• CE (Declaration of Conformity)

Environment

•Operating: 5

C~35

• Non-operating: -40

C ~ 70

Chapter 1: Overview 3

1.3 Unpacking

If any items are missing or appear damaged, contact your

retailer or browse to TYAN’s Web site for service:

http://www.tyan.com.

The Web site also provides information on other TYAN prod-

ucts, plus FAQs, compatibility lists, BIOS settings, and more.

FDDs

1 x Tyan driver CD

SMDC Kit

Power Cords

Left to right: Europe, US

HDD Screws

Mounting Ears & Screws

FDD Kit

FDD Cable

FDD Backplane Cable

FDD Rails & Screws

4 Chapter 1: Overview

Mainboard Manual

Barebone Manual

Heatsink x 1

Rail Kit

Mounting Bracket x 4

Screws Kit

Front

Rear

Sliding Brackets

Front L-Bracket x 2

Rear L-Bracket x 2

Sliding Rails x 2

Chapter 1: Overview 5

1.4 About the Product

The following views show you the product.

1.4.1 Front View

*Reserved: reserved for future upgrade

1.4.2 Rear View

CD-ROM Drive

Hard Drive Bay x 4

HDD activity LED

Power switch

Power LED

Reset

switch

USB ports

Warning LED

LAN LED

*Reserved

Power Supply Socket

PS/2 Mouse/Keyboard Ports

Serial Port

VGA Port

PCI-X Slot

USB Port x 2

LAN Port (NIC3)

LAN Port (NIC1)

LAN Port (NIC2)

6 Chapter 1: Overview

1.4.3 LED Definition

Front Panel

Rear I/O LED

LED Color State Description

Power Green

OFF

Power ON

Power OFF

HDD Activity Amber

OFF

Radom Blink

OFF

HDD access activity

No disk activity

LAN1/LAN2 Activity Green Blink LAN access activity

Warning Reserved LED for future upgrade. It is not functional in

the B5151 barebone now.

Hot Swappable HDD

Tray Power LED

Green

OFF

Power connected

Power disconnected

Hot Swappable

HDD Tray Access

LED

Reserved LED for future upgrade. It is not functional in

the B5151 barebone now.

LED Color State Description

RJ45 NIC1 Linkage

(Left Side)

Green

OFF

Blinking

OFF

LAN linked

LAN accessing

No LAN linked

RJ45 NIC1 Mode

(Right Side)

Amber

Green

OFF

Gigabit mode

100M mode

10M mode

RJ45 NIC2 Linkage

(Left Side)

Green

OFF

Blinking

OFF

LAN linked

LAN accessing

No LAN linked

RJ45 NIC2 Mode

(Right Side)

Amber

Green

OFF

Gigabit mode

100M mode

10M mode

Chapter 1: Overview 7

NOTE: “Right” or “Left” is viewed from the rear.

RJ45 NIC3 Linkage

(Left Side)

Green

OFF

Blinking

OFF

LAN linked

LAN accessing

No LAN linked

RJ45 NIC3 Mode

(Right Side)

Green

OFF

100M mode

10M mode

8 Chapter 1: Overview

1.4.4 Internal View

1. PCI-X Slot

2. Link Bar

3. Memory Slots

4. EPS 12V Power Supply

5. Air Duct

6. System Fans (Left to right:

FAN5, FAN4, FAN3, FAN2,

FAN1)

7. Adapter Board

8. SATA Backplane

9. LED Control Board Cable

10. Tyan TARO Connector

11. SATA Cable

12. CD-ROM Cable

13. USB Cable

14. Four SATA HDDs

Chapter 1: Overview 9

1.4.5 Motherboard Block Diagram

10 Chapter 1: Overview

1.4.6 Motherboard Layout

64bit 133/100/66MHz PCI-X

X1 PCI Express

32-bit 33MHz (5V) PCI

IDE J17

X1 PCI Express

SO-DIMM

J25PJP24

JP26

LPT

FDD

JP4/JP5/JP6/JP7

JP2

BROADCOM

5721

BROADCOM

5721

JP1

JP13

JP12

JP15

SATA1

SATA3

JP15

SATA4

SATA2

SMDC

JP16

JP18

JP17

JP23

JP17

JP22

BROAD COM

5721

JP3

LAN

VGA

JP3

COM

PORT

USBX2

LAN

PS/2

Chapter 1: Overview 11

Jumpers & Connectors

Jumper

/Connector

Function

J5 COM2 port

J12 SO-DIMM socket

J20/J21/J22/J23 Serial ATA RAID connectors

JP1/JP2/JP3 LAN2/LAN1/LAN3 disabled headers

JP4/JP7 Front panel LAN1/LAN2 speed LED pin-headers

JP5/JP6 Front panel LAN1/LAN2 link and active LED connec-

tors

JP8 Chassis fan connector

JP20 SMDC connector

JP12/JP13 Front panel USB2.0 connectors

JP14 PCI-X speed select header

JP15 Clear CMOS jumper

JP17/JP18/JP23 Front fan connectors

JP24/JP25 SMDC/ASF2.0 select headers

12 Chapter 1: Overview

Memo

Page is loading ...

Tyan Transport GT20 B5151 User manual

Brand: Tyan

Model: Transport GT20 B5151

Category: Server barebones

Type: User manual

Download PDF

report

Tyan Transport GT20 B5151 User manual

Tyan Transport GT20 B5151 User manual

Related papers

Other documents