Tyan Tank GT20 B5372-LH User manual

Brand: Tyan

Model: Tank GT20 B5372-LH

Category: Server barebones

Type: User manual

Tyan Tank GT20 B5372-LH is a rack-mountable barebone system designed to support two Intel® Xeon 5100/5200/5300/5400 (80W CPUs or lower) processors. It offers scalable 32 and 64-bit performance with support for up to 16 DIMM slots and a maximum memory capacity of 512GB. The system includes an M1012 adapter board for connecting up to 12 SATA or SAS drives, providing ample storage capacity for demanding applications. Additionally, the Tank GT20 B5372-LH features a slim CD-ROM drive for convenient software installation and recovery.

Tank GT20

B5372-LH

Service Engineer’s Manual

PREFACE

This publication, including all photographs, illustrations, and soft-

ware, is protected under international copyright laws, with all rights

reserved. Neither this manual, nor any material contained herein,

may be reproduced without written consent of the manufacturer-.

Version 1.0

Disclaimer

Information contained in this document is furnished by TYAN Com-

puter Corporation and has been reviewed for accuracy and reliability

prior to printing. TYAN assumes no liability whatsoever, and dis-

claims any express or implied warranty, relating to sale and/or use of

TYAN products including liability or warranties relating to fitness for

a particular purpose or merchantability. TYAN retains the right to

make changes to product descriptions and/or specifications at any

time, without notice. In no event will TYAN be held liable for any

direct or indirect, incidental or consequential damage, loss of use,

loss of data or other malady resulting from errors or inaccuracies of

information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners

including, but not limited to the following.

TYAN and Tank GT20 B5372-LH are trademarks of TYAN Computer

Corporation.

Intel, Xeon, and combinations thereof are trademarks of Intel Corpo-

ration.

Phoenix, PhoenixBIOS, and combinations thereof are trademarks of

Phoenix Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe Corpora-

tion.

Federal Communications Commission (FCC)

Notice for the USA Compliance Information State-

ment (Declaration of Conformity Procedure) DoC FCC

Part 15: This device complies with part 15 of the FCC

Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received including inter-

ference that may cause undesired operation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the

receiver.

– Plug the equipment into an outlet on a circuit different from

that of the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Europe (CE Mark) This product is in conformity

with the Council Directive 2004/108/EC (EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. Danger of explosion if battery

is incorrectly replaced. Replace only with the same or equivalent

type recommended by manufacturer. Dispose of used battery

according to manufacturer instructions and in accordance with your

local regulations.

iii

About this Manual

This manual provides you with instructions on installing your Tank

GT20. This manual is intended for experienced users and integra-

tors with hardware knowledge of personal computers.

This manual consists of the following parts

Chapter 1: Provides an Introduction to the Tank GT20 B5372-

LH bare-bones, packing list, describes the exter-

nal components, gives a table of key components,

and provides block diagrams of the system.

Chapter 2: Covers procedures on installing the CPU, mem-

ory modules, an optional PCI-E card, and hard

drives.

Chapter 3: Covers removal and replacement procedures for

pre-installed components

Appendix: Provides information on installing SMDC cards

and describes the differences between mainboard

BIOS and system BIOS. The cable connection

tables and FRU parts list are also provided for ref-

erence of system setup.

For information on the mainboard, please refer to the attached main-

board user’s manual. You can find the detailed description about

jumper and BIOS settings from the motherboard manual.

SAFETY INFORMATION

Before installing and using the Tank GT20, take note of the following

precautions:

– Read all instructions carefully.

– Do not place the unit on an unstable surface, cart, or stand.

– Do not block the slots and opening on the unit, which are pro-

vided for ventilation.

– Only use the power source indicated on the marking label. If

you are not sure, contact the Power Company.

– The unit uses a three-wire ground cable, which is equipped

with a third pin to ground the unit and prevent electric shock.

Do not defeat the purpose of this pin. If your outlet does not

support this kind of plug, contact your electrician to replace

your obsolete outlet.

– Do not place anything on the power cord. Place the power

cord where it will not be in the way of foot traffic.

– Follow all warnings and cautions in this manual and on the

unit case.

– Do not push objects in the ventilation slots as they may touch

high voltage components and result in shock and damage to

the components.

– When replacing parts, ensure that you use parts specified by

the manufacturer.

– When service or repairs have been done, perform routine

safety checks to verify that the system is operating correctly.

– Avoid using the system near water, in direct sunlight, or near

a heating device.

– Cover the unit when not in use.

Table of Contents

Chapter 1:Overview

1.1 About the Tank GT20 B5372-LH . . . . . . . . . . . . . . . . . . . . . . . . . .1

1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

1.3 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

1.3.1 Opening the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

1.3.2 Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

1.3.3 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

1.4 About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

1.4.1 Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

1.4.2 Rear View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

1.4.3 LED Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

1.4.4 Internal View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

1.4.5 Motherboard Block Diagram . . . . . . . . . . . . . . . . . . . . . . .11

1.4.6 Motherboard Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Chapter 2:Setting Up

2.0.1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

2.0.2 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

2.0.3 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

2.0.4 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

2.1 Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

2.1.1 Installing the Server in a Rack . . . . . . . . . . . . . . . . . . . . . .17

2.2 Installing Motherboard Components. . . . . . . . . . . . . . . . . . . . . . .24

2.2.1 Removing the Chassis Cover . . . . . . . . . . . . . . . . . . . . . . .24

2.2.2 Installing the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

2.2.3 Installing the CPU and Heatsink . . . . . . . . . . . . . . . . . . . .27

2.2.4 Installing the PCI-E Card . . . . . . . . . . . . . . . . . . . . . . . . . .30

2.3 Installing the External Hard Drive . . . . . . . . . . . . . . . . . . . . . . . .32

Chapter 3:Replacing Pre-Installed Components

3.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

3.1.1 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

3.1.2 Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

3.1.3 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

3.2 Disassembly Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

3.3 Removing the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

3.4 Replacing Motherboard Components . . . . . . . . . . . . . . . . . . . . . .39

3.4.1 Disconnecting All Motherboard Cables. . . . . . . . . . . . . . .39

3.4.2 Removing the Motherboard . . . . . . . . . . . . . . . . . . . . . . . .40

3.5 Replacing the Slim CD-ROM (Option). . . . . . . . . . . . . . . . . . . . .41

3.6 Replacing the LED Control Board . . . . . . . . . . . . . . . . . . . . . . . .43

3.7 Replacing the M1012 Adapter Board . . . . . . . . . . . . . . . . . . . . . .45

3.7.1 M1012 Adapter Board Features for B5372-LH. . . . . . . . .47

3.7.2 System Fan Connection . . . . . . . . . . . . . . . . . . . . . . . . . . .48

3.7.3 M1012 Adapter Board Connector Pin Definition . . . . . . .49

3.8 Replacing the SATA/SAS Backplane . . . . . . . . . . . . . . . . . . . . . .54

3.8.1 M1208-2 SATA/SAS Backplane Features. . . . . . . . . . . . .55

3.9 Replacing the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Appendix I: BIOS Differences

Appendix II: Cable Connection Tables

Appendix III: Installing SMDC Cards

Appendix IV: FRU Parts List

Technical Support

Chapter 1: Overview 1

Chapter 1: Overview

1.1 About the Tank GT20 B5372-LH

Congratulations on your purchase of the TYAN Tank

GT20

(B5372-LH), a highly-optimized rack-mountable barebone

system. The Tank GT20 (B5372-LH) is designed to support

two Intel

Xeon 5100/5200/5300/5400 (80W CPUs or lower)

processors, providing a rich feature set and incredible perfor-

mance. Leveraging advanced technology from Intel

, the

Tank GT20 (B5372-LH) server system is capable of offering

scalable 32 and 64-bit computing, high-bandwidth memory

design, and a lightning-fast PCI-E bus implementation. The

Tank

GT20 (B5372-LH) not only empowers your company

in today’s demanding IT environment but also offers a

smooth path for future application usage.

TYAN is also proud to deliver the Tank

GT20 (B5372-LH) in

SATA flavor while supporting up to four (4) hot-swap hard

drives. The Tank

GT20 (B5372-LH) uses TYAN’s latest

tooling-made chassis featuring a robust structure, tool-less

and modularized design, and a solid mechanical enclosure.

All of this provides the Tank

GT20 (B5372-LH) the power

and flexibility to meet the needs of nearly any server applica-

tion.

2 Chapter 1: Overview

1.2 Features

Enclosure

• Industry 19” rack-mountable 1U

chassis storage bay

– (4) 3.5” HDD bays

– (1) Dummy Drive Bay (optional

CD-ROM/DVD-ROM)

• Dimension: D 22.4 x W 17.2 x H

1.72 inch (568x436x43.6mm)

Processor

• Supports up to two Intel

Xeon

5100/5200/5300/5400 (80W CPUs

or lower) series processors

• Dual LGA 771 sockets

• 1066/1333MHz FSB

Chipsets

• Intel 5000V (Blackford-VS) MCH

• Intel ESB2 I/O Controller Hub

• SMSC SCH5017 Super I/O Chip

• SMSC SCH5017, EMC6D103 &

Winbond 83793G H/W monitoring

Memory

• Dual memory channels, six (6) fully-

buffered DIMMs

• ECC memory supported

• DDR2 667/533 memory

Video

•XGI

XG20 PCI graphics controller

• 16MB DDR frame buffer of video

memory

Storage

• Support (4) SATA/SATA2 HDD with

RAID 1, 0, 5, 10

Expansion Slot

• One (1) 133MHz PCI-X riser

(M2055) or one (1) x8 PCI-E (x16

socket, M2082-2) option

Motherboard

• TYAN S5372G2NR-LH system

board

• SSI CEB v1.01 footprint (12 x 10.5”)

Back I/O Ports

• Stacked PS/2 mouse & keyboard

ports

• Stacked two (2) USB 2.0

• One (1) 15-pin VGa port

• One (1) 9-pin COM port

• Two (2) RJ-45 10/100/1000 Base-T

ports

Front Panel Features

•I/O

– Two (2) USB 2.0 ports

•LED indicators

– Power LED

– Two (2) LAN LEDs

– HDD active LEDs

– System Warning LED

–ID LED

• Switches

– Power

– Reset

–NMI

–ID

Networking

• Two (2) LAN ports

– Dual Gigabit ports (ESB2 embed-

ded MAC with Intel i52863EB

PHY)

Server Management

• System fan speed control and moni-

toring

• Supports TYAN Server Manage-

ment (TSM)

• Optional Tyan M3291 SMDC kit,

IPMI 2.0 compliant

• Supports TYAN LCM Module

BIOS

• Phoenix 8Mbit LPC Flash ROM

• Serial Console Redirect

• Supports ACPI 1.0b & APM1.2

• USB boot supported

• PnP, DMI2.0 WfM2.0 power man-

agement

Chapter 1: Overview 3

System Cooling

• Five (5) 40*40*28mm 15000rpm

heavy-duty fans with fan speed

monitor/control

• Two (2) passive CPU heatsinks

Regulatory

• FCC Class A (Declaration of Con-

formity)

• CE (Declaration of Congormity)

• VCCI

•C-Tick

Environment Temperature

• Operating temperature 5

C~35

• Non-operating temperature -40

C ~

Power Supply

• EPS 12V, 1U, 400W (80 plus)

• 100V~240V AC input

4 Chapter 1: Overview

1.3 Unpacking

This section describes the Tank GT20 package contents and

accessories.

1.3.1 Opening the box

Open the box carefully and ensure that all components are

present and undamaged. The product should arrive pack-

aged as illustrated below.

Packaged accessories

Chapter 1: Overview 5

1.3.2 Box Contents

LED and USB control board

(pre-installed)

Industry standard 1U chassis,

(4) hot-swap HDD bays

EPS 1U 400W PSU

(pre-installed)

Tyan S5372-LH motherboard

(pre-installed)

(5) 40mm x 28mm

M1208-2 SATA/SAS Backplane

Fan Adapter Board

6 Chapter 1: Overview

1.3.3 Accessories

If any items are missing or appear damaged, contact your

retailer or browse to TYAN’s Web site for service:

http://www.tyan.com.

The Web site also provides information on other TYAN prod-

ucts, plus FAQs, compatibility lists, BIOS settings, and more.

1 x Tyan Barebone driver CD

Power Cables

Left to right: Europe, US

HDD Screws

Mounting Ears & Screws

(2) Heatsink

Barebone Manual

PCI-X Card (M2055)

Mainboard Manual

Chapter 1: Overview 7

Rail Kit

Mounting Bracket x 4

Sliding Brackets

Front L-Bracket x 2

Rear L-Bracket x 2

Screws Kit

Sliding Rails x 2

FDD Kit

FDD Cable

FDD Backplane Cable

FDD Installing Rails & Screws

8 Chapter 1: Overview

1.4 About the Product

The following views show you the product.

1.4.1 Front View

1.4.2 Rear View

Hard Drive Bay x 4

Power switch

Reset switch

USB ports

2 x LAN LEDs

ID Switch

ID LED

HDD activity LED

NMI switch

Warning LED

Power LED

Power Supply Socket

PS/2 Mouse/Keyboard Ports

Serial Port

VGA Port

PCI-X Slot

LAN Port (NIC1)

LAN Port (NIC2)

ID LED

2 USB Ports

Chapter 1: Overview 9

1.4.3 LED Definition

Front Panel

Rear I/O LED *

Right or Left is viewed from the rear.

LED Color State Description

Power Green

OFF

Power ON

Power OFF

HDD Activity Amber

OFF

Random Blinking

OFF

HDD access activity

No disk activity

LAN1/LAN2 Linkage Green

Green

OFF

Blinking

OFF

LAN linked

LAN accessing

No LAN linked

Warning Red

OFF

Fan fails

Normal

Hot Swappable HDD

Tray Power LED

Green

OFF

Power connected

Power disconnected

Hot Swappable SATA

HDD Access LED

Amber

OFF

Random Blinking

OFF

HDD Access Activity

No disk activity

Hot Swappable SAS

HDD Access LED

Amber

OFF

Random Blinking

OFF

HDD ready

HDD access activity

HDD not ready

ID LED Blue

OFF

System is identified

System is not identified

LED Color State Description

RJ45 NIC1 Linkage

(Left Side)

Green

OFF

Blinking

OFF

LAN linked

LAN accessing

No LAN linked

RJ45 NIC1 Mode

(Right Side)

Amber

Green

OFF

Gigabit mode

100M mode

10M mode

RJ45 NIC2 Linkage

(Left Side)

Green

OFF

Blinking

OFF

LAN linked

LAN accessing

No LAN linked

RJ45 NIC2 Mode

(Right Side)

Amber

Green

OFF

Gigabit mode

100M mode

10M mode

ID LED Blue

OFF

System is identified

System is not identified

10 Chapter 1: Overview

1.4.4 Internal View

1. PCI-E Riser Card Slot

2. Link Bar

3. Memory Slots

4. EPS Power Supply

5. CPU Sockets

6. System Fans

(from right to left):

FAN1/2/3/4/5

7. M1012 Adapter Board

8. SATA/SAS Backplane

9. Four SATA HDD Bays

10. Fan Cable

11. Power Connector

FAN1FAN5

FAN2FAN3FAN4

Chapter 1: Overview 11

1.4.5 Motherboard Block Diagram

12 Chapter 1: Overview

1.4.6 Motherboard (S5372-LH) Layout

Page is loading ...

Tyan Tank GT20 B5372-LH User manual

Brand: Tyan

Model: Tank GT20 B5372-LH

Category: Server barebones

Type: User manual

Download PDF

report

Tyan Tank GT20 B5372-LH User manual

Tyan Tank GT20 B5372-LH User manual

Related papers

Other documents