Tyan Tank GT20 (B5372-LC) User manual

Category
Server barebones
Type
User manual
Tank GT20
B5372-LC
Service Engineers Manual
i
PREFACE
Copyright
This publication, including all photographs, illustrations, and soft-
ware, is protected under international copyright laws, with all rights
reserved. Neither this manual, nor any material contained herein,
may be reproduced without written consent of the manufacturer-.
Copyright 2007
Version 1.0
Disclaimer
Information contained in this document is furnished by TYAN Com-
puter Corporation and has been reviewed for accuracy and reliability
prior to printing. TYAN assumes no liability whatsoever, and dis-
claims any express or implied warranty, relating to sale and/or use of
TYAN products including liability or warranties relating to fitness for
a particular purpose or merchantability. TYAN retains the right to
make changes to product descriptions and/or specifications at any
time, without notice. In no event will TYAN be held liable for any
direct or indirect, incidental or consequential damage, loss of use,
loss of data or other malady resulting from errors or inaccuracies of
information contained in this document.
Trademark Recognition
All registered and unregistered trademarks and company names
contained in this manual are property of their respective owners
including, but not limited to the following.
TYAN and Tank GT20 B5372-LC are trademarks of TYAN Computer
Corporation.
Intel, Xeon, and combinations thereof are trademarks of Intel Corpo-
ration.
Phoenix, PhoenixBIOS, and combinations thereof are trademarks of
Phoenix Technologies.
Microsoft Windows is a trademark of Microsoft Corporation.
IBM, PC, AT, PS/2 are trademarks of IBM Corporation.
Winbond is a trademark of Winbond Electronics Corporation.
Portable Document Format (PDF) is a trademark of Adobe Corpora-
tion.
ii
Federal Communications Commission (FCC)
Notice for the USA Compliance Information State-
ment (Declaration of Conformity Procedure) DoC FCC
Part 15: This device complies with part 15 of the FCC
Rules
Operation is subject to the following conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received including inter-
ference that may cause undesired operation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
Plug the equipment into an outlet on a circuit different from
that of the receiver.
Consult the dealer on an experienced radio/television technician for
help.
Notice for Canada
This apparatus complies with the Class B limits for radio interference
as specified in the Canadian Department of Communications Radio
Interference Regulations. (Cet appareil est conforme aux norms de
Classe B d’interference radio tel que specifie par le Ministere Cana-
dien des Communications dans les reglements d’ineteference
radio.)
Notice for Europe (CE Mark) This product is in conformity
with the Council Directive 89/336/EEC, 92/31/EEC
(EMC).
CAUTION: Lithium battery included with this board. Do not puncture,
mutilate, or dispose of battery in fire. Danger of explosion if battery
is incorrectly replaced. Replace only with the same or equivalent
type recommended by manufacturer. Dispose of used battery
according to manufacturer instructions and in accordance with your
local regulations.
iii
About this Manual
This manual provides you with instructions on installing your Tank
GT20. This manual is intended for experienced users and integra-
tors with hardware knowledge of personal computers.
This manual consists of the following parts
Chapter 1: Provides an Introduction to the Tank GT20 B5372-
LC bare-bones, packing list, describes the exter-
nal components, gives a table of key components,
and provides block diagrams of the system.
Chapter 2: Covers procedures on installing the CPU, mem-
ory modules, an optional PCI-X card, and hard
drives.
Chapter 3: Covers removal and replacement procedures for
pre-installed components
Appendix: Provides information on installing SMDC cards
and describes the differences between mainboard
BIOS and system BIOS. The cable connection
tables are also provided for reference of system
setup.
For information on the mainboard, please refer to the attached main-
board user’s manual. You can find the detailed description about
jumper and BIOS settings from the motherboard manual.
iv
SAFETY INFORMATION
Before installing and using the Tank GT20, take note of the following
precautions:
Read all instructions carefully.
Do not place the unit on an unstable surface, cart, or stand.
Do not block the slots and opening on the unit, which are pro-
vided for ventilation.
Only use the power source indicated on the marking label. If
you are not sure, contact the Power Company.
The unit uses a three-wire ground cable, which is equipped
with a third pin to ground the unit and prevent electric shock.
Do not defeat the purpose of this pin. If your outlet does not
support this kind of plug, contact your electrician to replace
your obsolete outlet.
Do not place anything on the power cord. Place the power
cord where it will not be in the way of foot traffic.
Follow all warnings and cautions in this manual and on the
unit case.
Do not push objects in the ventilation slots as they may touch
high voltage components and result in shock and damage to
the components.
When replacing parts, ensure that you use parts specified by
the manufacturer.
When service or repairs have been done, perform routine
safety checks to verify that the system is operating correctly.
Avoid using the system near water, in direct sunlight, or near
a heating device.
Cover the unit when not in use.
v
Table of Contents
Chapter 1:Overview
1.1 About the Tank GT20 B5372-LC . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.3 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1.3.1 Opening the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3.2 Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.3.3 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
1.4 About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.4.1 Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.4.2 Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.4.3 LED Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.4.4 Internal View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1.4.5 Motherboard Block Diagram. . . . . . . . . . . . . . . . . . . . . . . 11
1.4.6 Motherboard Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Chapter 2:Setting Up
2.0.1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.0.2 Work Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.0.3 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.0.4 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.1 Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.1.1 Installing the Server in a Rack. . . . . . . . . . . . . . . . . . . . . .17
2.2 Installing Motherboard Components. . . . . . . . . . . . . . . . . . . . . . . 24
2.2.1 Removing the Chassis Cover. . . . . . . . . . . . . . . . . . . . . . . 24
2.2.2 Installing the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.2.3 Installing the CPU and Heatsink . . . . . . . . . . . . . . . . . . . . 27
2.2.4 Installing the PCI-X Card . . . . . . . . . . . . . . . . . . . . . . . . . 30
2.3 Installing the External Hard Drive . . . . . . . . . . . . . . . . . . . . . . . .32
Chapter 3:Replacing Pre-Installed Components
3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3.1.1 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3.1.2 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3.1.3 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3.2 Disassembly Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
3.3 Removing the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3.4 Replacing Motherboard Components . . . . . . . . . . . . . . . . . . . . . .39
3.4.1 Disconnecting All Motherboard Cables . . . . . . . . . . . . . . 39
3.4.2 Removing the Motherboard. . . . . . . . . . . . . . . . . . . . . . . . 40
3.5 Replacing the Slim CD-ROM (Option) . . . . . . . . . . . . . . . . . . . . 41
vi
3.6 Replacing the LED Control Board . . . . . . . . . . . . . . . . . . . . . . . .43
3.7 Replacing the M1012 Adapter Board . . . . . . . . . . . . . . . . . . . . . .45
3.7.1 M1012 Adapter Board Features for B5372-LC. . . . . . . . .47
3.7.2 System Fan Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
3.7.3 M1012 Adapter Board Connector Pin Definition . . . . . . .49
3.8 Replacing the SATA Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . 54
3.8.1 SATA Backplane Features. . . . . . . . . . . . . . . . . . . . . . . . . 55
3.9 Replacing the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Appendix I: BIOS Differences
Appendix II: Cable Connection Tables
Appendix III: Installing SMDC Cards
Appendix IV: FRU Parts List
Technical Support
Chapter 1: Overview 1
Chapter 1: Overview
1.1 About the Tank GT20 B5372-LC
Congratulations on your purchase of the TYAN Tank
TM
GT20
(B5372-LC), a highly-optimized rack-mountable barebone
system. The Tank GT20 (B5372-LC) is designed to support
two Intel
®
Xeon 5100/5100LV/5300(80W)/5300LV proces-
sors, providing a rich feature set and incredible performance.
Leveraging advanced technology from Intel
®
, the Tank GT20
(B5372-LC) server system is capable of offering scalable 32
and 64-bit computing, high-bandwidth memory design, and a
lightning-fast PCI-E bus implementation. The Tank
TM
GT20
(B5372-LC) not only empowers your company in today’s
demanding IT environment but also offers a smooth path for
future application usage.
TYAN is also proud to deliver the Tank
TM
GT20 (B5372-LC) in
SATA flavor while supporting up to four (4) hot-swap hard
drives and one (1) slim CD-ROM. The Tank
TM
GT20 (B5372-
LC) uses TYAN’s latest tooling-made chassis featuring a
robust structure, tool-less and modularized design, and a
solid mechanical enclosure. All of this provides the Tank
TM
GT20 (B5372-LC) the power and flexibility to meet the needs
of nearly any server application.
2 Chapter 1: Overview
1.2 Features
Enclosure
Industry 19” rack-mountable 1U
chassis storage bay
(4) 3.5” HDD bays
(1) Dummy Drive Bay (optional
CD-ROM/DVD-ROM)
Dimension: D 22.4 x W 17.2 x H
1.72 inch (568x436x43.6mm)
Processor
Supports up to two Intel
®
Xeon
5100/5100LV/5300(80W)/5300LV
series processors
Dual LGA 771 sockets
1066/1333MHz FSB
Chipsets
Intel 5000V (Blackford-VS) MCH
Intel ESB2 I/O Controller Hub
SMSC SCH5017 Super I/O Chip
SMSC EMC6D103 H/W monitoring
IC
Memory
Dual memory channels
Supports six (6) fully-buffered
DIMMS
Max. 24GB of ECC DDR2 667/533
memory
Video
•XGI
®
XG20 PCI graphics controller
16MB DDR frame buffer of video
memory
Storage
Hard Disk Drives:
Support (4), SATA/SATA2 HDD
with RAID 1, 0, 5, 10
Expansion Slot
One (1) 133MHz PCI-X riser
(M2055) or one (1) x8 PCI-E (x16
socket, M2082-2) option
Motherboard
TYAN S5372G2NR-LC system
board
SSI CEB v1.01 footprint (12 x 10.5”)
Back I/O Ports
Stacked PS/2 mouse & keyboard
ports
Stacked two USB 2.0
One 15-pin VGa port
One 9-pin COM port
Two RJ-45 10/100/1000 Base-T
ports
Front Panel Features
•I/O
(2) USB 2.0 ports
•LED indicators
Power LED
(2) LAN LEDs
HDD active LEDs
System Warning LED
–ID LED
Switches
Power
Reset
–NMI
–ID
Integrated Storage Controller
ESB2
Single channel master mode
supports two (2) IDE devices
Support four (4) SATA ports
Networking
Two (2) LAN ports
Dual Gigabit ports (ESB2 embed-
ded) with Intel i52863EB dual
PHY)
Server Management
System fan speed control and moni-
toring
Supports TYAN Server Manage-
ment (TSM)
Optional Tyan SMDC M3291 card,
IPMI 2.0 compliant
BIOS
Phoenix BIOS on 8Mbit Flash ROM
Serial Console Redirect
Supports ACPI 1.0 & APM1.2
USB boot supported
PnP, DMI2.0 WfM2.0 power man-
agement
Chapter 1: Overview 3
System Cooling
Five (5) 40*40*28mm 15000rpm
heavy-duty fans with fan speed
monitor/control
Passive CPU heatsinks
Regulatory
FCC Class A (Declaration of Con-
formity)
CE (Declaration of Congormity)
VCCI
•C-Tick
Environment Temperature
Operating temperature 5
o
C~35
o
C
Non-operating temperature -40
o
C ~
70
o
C
Power Supply
High efficiency EPS 12V, 1U, 400W
with PFC
100V~240V AC input
4 Chapter 1: Overview
1.3 Unpacking
This section describes the Tank GT20 package contents and
accessories.
1.3.1 Opening the box
Open the box carefully and ensure that all components are
present and undamaged. The product should arrive pack-
aged as illustrated below.
Packaged accessories
Chapter 1: Overview 5
1.3.2 Box Contents
LED and USB control board
(pre-installed)
Industry standard 1U chassis,
(4) hot-swap HDD bays
EPS 1U 400W PSU
(pre-installed)
Tyan S5372-LC motherboard
(pre-installed)
(5) 40mm x 28mm
SATA Backplane
Fan Adapter Board
6 Chapter 1: Overview
1.3.3 Accessories
If any items are missing or appear damaged, contact your
retailer or browse to TYAN’s Web site for service:
http://www.tyan.com.
The Web site also provides information on other TYAN prod-
ucts, plus FAQs, compatibility lists, BIOS settings, and more.
1 x Tyan Barebone driver CD
Power Cables
Left to right: Europe, US
HDD Screws
Mounting Ears & Screws
(2) Heatsink
Barebone Manual
Chapter 1: Overview 7
Rail Kit
Mounting Bracket x 4
Sliding Brackets
Front L-Bracket x 2
Rear L-Bracket x 2
Screws Kit
Sliding Rails x 2
8 Chapter 1: Overview
1.4 About the Product
The following views show you the product.
1.4.1 Front View
1.4.2 Rear View
Hard Drive Bay x 4
Power switch
Reset switch
USB ports
2 x LAN LEDs
ID Switch
ID LED
HDD activity LED
NMI switch
Warning LED
Power LED
Power Supply Socket
PS/2 Mouse/Keyboard Ports
Serial Port
VGA Port
PCI-X Slot
LAN Port (NIC1)
LAN Port (NIC2)
ID LED
2 USB Ports
Chapter 1: Overview 9
1.4.3 LED Definition
Front Panel
Rear I/O LED *
Right or Left is viewed from the rear.
LED Color State Description
Power Green
OFF
ON
OFF
Power ON
Power OFF
HDD Activity Amber
OFF
Random Blinking
OFF
HDD access activity
No disk activity
LAN1/LAN2 Linkage Green
Green
OFF
ON
Blinking
OFF
LAN linked
LAN accessing
No LAN linked
Warning Red
OFF
ON
OFF
Fan fails
Normal
Hot Swappable HDD
Tray Power LED
Green
OFF
ON
OFF
Power connected
Power disconnected
Hot Swappable SATA
HDD Access LED
Amber
OFF
Random Blinking
OFF
HDD Access Activity
No disk activity
Hot Swappable SAS
HDD Access LED
Amber
Amber
OFF
ON
Random Blinking
OFF
HDD ready
HDD access activity
HDD not ready
ID LED Blue
OFF
ON
OFF
System is identified
System is not identified
LED Color State Description
RJ45 NIC1 Linkage
(Left Side)
Green
Green
OFF
ON
Blinking
OFF
LAN linked
LAN accessing
No LAN linked
RJ45 NIC1 Mode
(Right Side)
Amber
Green
OFF
ON
ON
OFF
Gigabit mode
100M mode
10M mode
RJ45 NIC2 Linkage
(Left Side)
Green
Green
OFF
ON
Blinking
OFF
LAN linked
LAN accessing
No LAN linked
RJ45 NIC2 Mode
(Right Side)
Amber
Green
OFF
ON
ON
OFF
Gigabit mode
100M mode
10M mode
ID LED Blue
OFF
ON
OFF
System is identified
System is not identified
10 Chapter 1: Overview
1.4.4 Internal View
1
2
6
11
5
7
8
9
1. PCI-E Riser Card Slot
2. Link Bar
3. Memory Slots
4. EPS Power Supply
5. CPU
6. System Fans
(from right to left):
FAN1/ 2/3/4 /5
7. M1012 Adapter Board
8. SATA Backplane
9. Four SATA HDD Bays
10. CD-ROM Cable
11. Four SATA Cables
12. Power Connector
3
10
4
12
FAN1FAN5
2
22
234
Chapter 1: Overview 11
1.4.5 Motherboard Block Diagram
12 Chapter 1: Overview
1.4.6 Motherboard (S5372-LC) Layout
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80

Tyan Tank GT20 (B5372-LC) User manual

Category
Server barebones
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI