Strands 850933 User manual

850933
Brand
Strands
Model
850933
Type
User manual

Strands 850933 is a surface-mounted LED light beacon designed for maritime and industrial applications. Featuring a compact and robust design, it provides high visibility and long-range illumination with minimal power consumption. The versatile three-wire connection allows for easy integration into various electrical systems, while the pattern switch enables customization of the light pattern. With its durable construction and resistance to harsh conditions, the Strands 850933 ensures reliable performance in demanding environments.

Strands 850933 is a surface-mounted LED light beacon designed for maritime and industrial applications. Featuring a compact and robust design, it provides high visibility and long-range illumination with minimal power consumption. The versatile three-wire connection allows for easy integration into various electrical systems, while the pattern switch enables customization of the light pattern. With its durable construction and resistance to harsh conditions, the Strands 850933 ensures reliable performance in demanding environments.

MANUAL
CRUISE LIGHT BEACON LED - SURFACE MOUNTING
www.strands.se
www.strandseurope.com
RED = +VDC
WHITE = - TO CHASSIS GROUND
BROWN = PATTERN SWITCH
READ THIS BEFORE INSTALLATION
READ ALL INSTRUCTIONS AND STUDY DIAGRAMS BEFORE INSTALLING YOUR NEW LIGHTS!
LEGAL MOUNTING
Check with state or local authorities for laws governing usage and proper mounting of your new lights.
TAKE CARE OF YOUR PRODUCT
Keep the product clean. Dirt may shorten the products lifetime.
We recommend using lukewarm water and alkaline degreasing.
Follow the degreasing instructions carefully and rinse off gently with cold or lukewarm water on low pressure.
WARNING!
Strong chemicals should not be used on the product. If you accidently get strong chemicals on the product, rinse off immediately, use
plenty of water so that no chemicals remain in any joint.
Some chemicals have a small amount of solvent in them, this can dissolve sealing adhesives and compromise the product's
waterproofness.
Some chemicals pull out liquid from plastic and rubber-based components, which makes the plastic or rubber brittle and bursts more
easily.
Be careful not to use high water pressure close up on the product.
If you use high water pressure at short distances, most products find it difficult to close out the water.
INSTALLATION
If there is a contact/connector on the product, it should not be cutted. If the connector is cut, the warranty is not valid.
If the product has loose cable and no connector. If the cable is shorter than 50 cm, the cable must not be cutted. If the cable is cut, the
warranty is not valid.
If the cable is longer than 50 cm, it is ok to shorten the cable, but not shorter than 50 cm.
If the cable is cut shorter than 50 cm, the warranty is not valid.
WARNING!
Do not use higher volts than the product description states.
This light becomes hot under continuous use. Don´t remove or touch the casing for at least 30 minutes after turning the lamp off.
Part no. 850933
Contact us if you need support: [email protected] or +46(0)320-450450
  • Page 1 1

Strands 850933 User manual

850933
Brand
Strands
Model
850933
Type
User manual

Strands 850933 is a surface-mounted LED light beacon designed for maritime and industrial applications. Featuring a compact and robust design, it provides high visibility and long-range illumination with minimal power consumption. The versatile three-wire connection allows for easy integration into various electrical systems, while the pattern switch enables customization of the light pattern. With its durable construction and resistance to harsh conditions, the Strands 850933 ensures reliable performance in demanding environments.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents