Kustom 006-0040-10 User guide

Brand: Kustom

Model: 006-0040-10

Type: User guide

Kustom 006-0040-10 is a versatile device that offers a range of features to enhance traffic safety. With its ability to display target speeds, it can effectively alert drivers to their speed and encourage them to slow down. Additionally, the device provides various customization options, allowing users to adjust overspeed and blanking speed settings, as well as enable or disable different modes such as stealth mode and speed-controlled flash. Furthermore, it can be integrated with external strobes and white strobes for increased visibility.

Kustom 18” Display with SLOW DOWN Quick Reference Guide



UPandDOWNUserInterfaceButtons:

Usedtomovebetweenmenusandtoincrease/decreasevalues.



SELECTUserInterfaceButton:

Usedtoselectmenusandtosetvalues.

OVERSPEED

ModeIndicator

OVERSPEEDIndicator:

Illuminatedwheneveratargetspeedisgreaterthanorequaltoanyoftheoverspeedsettings.Blinkswheninoverspeed

changingmode.

BLANKING

ModeIndicator

BLANKINGIndicator:

Illuminatedwheneveratargetspeedisgreaterthanorequaltothehighblankingspeedsettingorlowerthanorequaltothelow

blankingspeedsetting.Blinkswheninblankingspeedchangingmode.

VOLTAGELEVEL

OptionsIndicator

VOLTAGELEVEL/OptionsIndicator:

Illuminatedwhenthesystemvoltageisbeingdisplayed.Blinkswheninsystemmenuorchangingoptionssettings.

CLOCKIndicator



CLOCKIndicator:

Displaysthecurrentdateandtimeofthesign.Blinkswhenchangingdateandtimevalues.



DisplayWindow:

Displaysthecurrenttargetspeeds.Alsousedtoviewandchangethesystemsettings.TherightmostLEDisthePowerLEDwhich

shouldconstantlyblinktoindicatethesystemisrunning.“nc”indicatesthecommunicationtotheradarhasbeenlost.

ChangingSettings:

OVERSPEED1

(Flashing

Digits/SLOW

DOWN)SETTING

TochangetheOverspeed1setting,usinguserinterfacebuttons:

1. movetotheOVERSPEEDLED→SELECT→

2. moveto“OS1”→SELECT→

3. choosenewvalue→SELECT

OVERSPEED2

(LightbarStrobes)

SETTING

TochangetheOverspeed2setting,usinguserinterfacebuttons:

1. movetotheOVERSPEEDLED→SELECT→

2. moveto“OS2”→SELECT→

3. choosenewvalue→SELECT

OVERSPEED3

(WhitePhoto

Strobe)SETTING

TochangetheOverspeed3setting,usinguserinterfacebuttons:

1. movetotheOVERSPEEDLED→SELECT→

2. moveto“OS3”→SELECT→

3. choosenewvalue→SELECT

BLANKINGSPEED

HISETTING

TochangetheBlankingSpeedHIGHsetting,usinguserinterfacebuttons:

1. movetotheBLANKINGLED→SELECT→

2. moveto“bSH”→SELECT→

3. choosenewvalue→SELECT

BLANKINGSPEED

LOSETTING

TochangetheBlankingSpeedLOWsetting,usinguserinterfacebuttons:

1. movetotheBLANKINGLED→SELECT→

2. moveto“bSL”→SELECT→

3. choosenewvalue→SELECT

DEMOMODEToengagethedemonstrationmode,usinguserinterfacebuttons:

1. movetotheVOLTAGELEVELLED→SELECT→

2. moveto“dE”→SELECT→

3. choose“On”/”OFF”→SELECT

STEALTHMODEToengagethestealthmode,usinguserinterfacebuttons:

1. movetotheVOLTAGELEVELLED→SELECT→

2. moveto“StL”→SELECT→

3. choose“On”/”OFF”→SELECT

SPEED

CONTROLLED

FLASH

Toengagethespeedcontrolledflashmode,usinguserinterfacebuttons:

1. movetotheVOLTAGELEVELLED→SELECT→

2. moveto“SCF”→SELECT→

3. choose“On”/”OFF”→SELECT

EXTERNALSTROBES

ENABLE

Toengagetheexternalstrobesenablemode,usinguserinterfacebuttons:

1. movetotheVOLTAGELEVELLED→SELECT→

2. moveto“St1”→SELECT→

3. choose“On”/”OFF”→SELECT

WHITESTROBES

ENABLE(ifenabled)

Toengagethewhitestrobesenablemode,usinguserinterfacebuttons:

1. movetotheVOLTAGELEVELLED→SELECT→

2. moveto“St2”→SELECT→

3. choose“FLA”/”BLI”/”OFF”→SELECT

SLOWDOWN

ENABLE

ToengagetheSLOWDOWNenablemode,usinguserinterfacebuttons:

1. movetotheVOLTAGELEVELLED→SELECT→

2. moveto“SLO”→SELECT→

3. choose“ALt”/“FLA”/”SOL”/”OFF”→SELECT

GPSENABLE

(ifenabled)

ToengagetheGPSmode,usinguserinterfacebuttons:

1. movetotheVOLTAGELEVELLED→SELECT→

2. moveto“GPS”→SELECT→

3. choose“On”/”OFF”→SELECT

SETTINGTHE

DATE/TIME

WARNING:IfyouhaveaTrafficComputer installed, pleasemakesurethepower(tc)isOFFandrebootthesignbeforechanging

thetimeordate.Thiswillavoidcorruptingdatainanactivetrafficstudy.

Tochangethedateand/ortime,usinguserinterfacebuttons:

1. movetotheCLOCKLED→SELECT→

2. adjustthe2digityear(00to99)→SELECT→

3. adjustthemonth(01to12)→SELECT→

4. adjustthedate(01to31)→SELECT→

5. adjustthehours(00‐23)→SELECT→

6. adjusttheminutes(00to59)→SELECT

TRAFFICCOUNTER

POWER

(ifenabled)

Toengagethetrafficcounterenablemode,usinguserinterfacebuttons:

1. movetotheVOLTAGELEVELLED→SELECT→

2. moveto“tc”→SELECT→

3. choose“On”/”OFF”→SELECT

TRAFFICCOUNTER

SCHEDULERENABLE

(ifenabled)

Toengagethetrafficcounterschedulerenablemode,usinguserinterfacebuttons:

1. movetotheVOLTAGELEVELLED→SELECT→

2. moveto“tcS”→SELECT→

3. choose“On”/”OFF”→SELECT

STARTINGASTUDY

(ifenabled)

Tostartanewtrafficstudy:

1. MakesurethetrafficcounterpowerisON.SeeTRAFFICCOUNTERPOWERabove.

2. TurnsignOFFthenONagain.Thiswillbeginanewstudy.

3. Ascarsgetaddedtothestudy,youmaynoticetheblueLEDflickertoindicateithasacquiredatarget.

STOPPINGASTUDY

(ifenabled)

Tostopacurrentlyrunningtrafficstudy:

1. TurnsignOFFthenONagain.Thiswillstoptherunningstudyandwriteittotheinternalmemory.

2. Ifanewstudyisready,theblueLEDnexttotheUSBportwillbeflashing.

3. Insertathumbdrive(8GBorless)intotheUSBport.“bSy”willappearinthedisplaywindow.

4. When“bSy”goesawayandtheblueLEDstopsflashing,thestudieshavebeentransferredtothethumbdriveandit

mayberemoved.DONOTREMOVEthumbdrivewhiletheblueLEDisflashingoryoucouldcorruptthethumbdrive.



p/n 006-0040-10 Rev 0

Kustom 006-0040-10 User guide

Kustom 006-0040-10 User guide

Kustom 006-0040-10 User guide

Other documents