DKS Magnetic Gate Locks User manual

DKS
Brand
DKS
Model
Magnetic Gate Locks
Type
User manual

This manual is also suitable for

1200 Lb. Magnetic Gate Lock Kit
DoorKing Part Numbers
1216-080
1216-081
It is essential that the surfaces of the armature and the magnetic lock seat perfectly to one another when the gate is in the closed
position. This allows the lock to achieve its maximum holding strength. It is critical the armature is securely fastened to the gate
frame, but able to move with the 1/8 to 1/4 inch rubber spacer(s) to correctly align with the magnetic lock.
Important: Weld the
brackets to fence post and
gate frame BEFORE
assembling the armature
and maglock.
Note: Additional hardware is
supplied for a side mount option
and different armature spacing
configurations.
DoorKing Optional Hardware Note: “L” and “Z” bracket kit
(P/N BO3-S12) is available for different installation configurations.
Sexnut Note: Using the sexnut,
the armature can be mounted
directly to the gate frame
without using the supplied
armature mounting bracket.
Secure sexnut through the gate
frame and into armature bolt.
120 Glasgow Avenue
Inglewood, California 90301 U.S.A.
Front Mount Typical
Maglock
Fron
t Mount Typical
1” Wel
d
ed
Brack
et Ar
matu
re Bolt
1 1
/
2” Armature Bolt
Wiring
A
ccess
Pl
ate
P/N B02-GL12
(Supplied)
P/N B01-GL12
(Supp
lie
d
)
Plug unused
1/
2” condui
t
ho
l
e
s.
Maglock
Mounting
Bracket
Weld to fen
ce post.
(Typical connec
tio
n
)
S
ide
Mo
u
nt Op
tion
S
ide
Mo
u
nt Op
tion
Installation
Armature
Bolt
Options
Maglock
Typical Front Mount Welded
Moving Gate Frame
Armature
Gate Frame
Armature
Sexnut
Stationary Fence Post
Welded Mounting Brackets
Armature
Thinner
Option
Typic
al
Thicker
Option
Insert
Roll Pin
Insert
Roll Pin
Sex
nut Co
nnection
Option
(Not used
fo
r
welded
bracket
option.)
Armature
Mounting
Bracket
Weld to
gate frame.
(Typical connection
)
Indoor
12 or 24 VDC Wire Run
16 AWG - 200 Ft
18 AWG - 100 Ft
Polarity Matters!
Use
Only
Indoor
Use
Onl
y
1216-065-B-4-09
Copyright 2009 DoorKing, Inc. All rights reserved.
MOV Note: Install the supplied
MOV across the power supply
terminals to protect the magnetic
lock from transient voltage spikes.
DoorKing Part Numbers
1216-080
1216-081
Relay
120 Glasgow Avenue
Inglewood, California 90301 U.S.A.
Wire for 24 VDC or 12 VDC ONLY
24 VDC Transformer
(Model 1812-035)
24 VDC
12 VDC
12 VDC Transformer
(Model 1812-037)
Red - Normally Closed
Black - Common
Green - Normally Open
Black
Green
Red Positive
Positive
Negative
Negative
White
LED Lock Status Sensor
Relay Contacts
Rated 1 amp @ 30 Volt max.
(Model 1216-081 Only)
LED Lock Status Sensor
Relay Contacts
Rated 1 amp @ 30 Volt max.
(Model 1216-081 Only)
Access Control Device
or Gate Operator
(Normally Closed)
Access Control Device
or Gate Operator
(Normally Closed)
Relay
Red - Normally Closed
Black - Common
Green - Normally Open
Red
Black
White
Green
MOV
MOV
  • Page 1 1
  • Page 2 2

DKS Magnetic Gate Locks User manual

DKS
Brand
DKS
Model
Magnetic Gate Locks
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents