PAC ACUK864 User manual

PAC
Brand
PAC
Model
ACUK864
Category
Car kits
Type
User manual

This manual is also suitable for

PAC BKACUK864 is a vehicle-specific dash kit for 2002-2006 Acura RSX models. It allows you to replace your factory radio with a single or double DIN aftermarket radio. The kit includes all the necessary hardware and instructions to make the installation process quick and easy.

With the PAC BKACUK864, you can upgrade your car's audio system with a new radio that offers more features and better sound quality. You can also add an auxiliary input to your car so you can connect your iPod, MP3 player, or other audio device.

Here are some of the features of the PAC BKACUK864:

  • Allows you to replace your factory radio with a single or double DIN aftermarket radio

PAC BKACUK864 is a vehicle-specific dash kit for 2002-2006 Acura RSX models. It allows you to replace your factory radio with a single or double DIN aftermarket radio. The kit includes all the necessary hardware and instructions to make the installation process quick and easy.

With the PAC BKACUK864, you can upgrade your car's audio system with a new radio that offers more features and better sound quality. You can also add an auxiliary input to your car so you can connect your iPod, MP3 player, or other audio device.

Here are some of the features of the PAC BKACUK864:

  • Allows you to replace your factory radio with a single or double DIN aftermarket radio
Acura
2002-06 RSX
VEHICLE APPLICATIONS
ACUK864 Mounting Kit
Automotive Products Division
1040 Avenida Acaso • Camarillo, CA 93012, U.S.A.
USA Sales (800) 336-6500
Canada Sales (888) 922-3006 • USA Fax (805) 388-7950
For information about other American International automotive
accessories visit our website at:
http://www.americaninternational.net
CUSTOMER HELP LINE
USA 800-323-4329 • Canada 800-245-8777
iACUK864
©2012 AMERICAN INTERNATIONAL INDUSTRIES, INC.
TECH Ver. 4/12 PRINT Ver. 4/12
2002-2006 ACURA RSX
DASH DISASSEMBLY & RADIO REMOVAL INSTRUCTIONS
1) Carefully unsnap and remove the dash panel directly below the factory radio,
disconnect the wire harness from the panel and remove panel.
2) Remove the (2) Phillips screws located directly below the rear of the radio.
3) Carefully pry factory radio forward from the rear of the radio (CAUTION!!)
Prying from the face of the factory radio without pulling radio forward from
below may damage the factory radio fascia.
4) Remove radio from dash cavity.
5) Disconnect wire harnesses and antenna lead from radio and Hazard switch,
then remove radio.
6) Remove the (8) Phillips screws securing the factory radio to the metal
support chassis. Then remove radio from chassis.
7) Remove the (2) screws securing the Hazard switch to the rear of the factory
bezel and remove Hazard switch.
8) Remove the (4) Phillips screws securing the metal support chassis to the rear
of the factory bezel and remove support chassis.
1
6
KIT
PREPARATION INSTRUCTIONS
For All Applications
1) Re-attach the metal support chassis to the rear of the ACUK864 using the
screws removed from the factory radio bezel.
2) Re-install hazard button to the rear of the ACUK864 using the screws
removed from the factory radio bezel.
Factory Chassis
ACUK864 Kit
1 of 4 Screws
used to attach
metal chassis
to rear of Kit
NOTES:
5 2
KIT ASSEMBLY INSTRUCTIONS
Single DIN Mount Applications
1) Prepare kit as shown under Preparation Instructions on page 1.
2) Attach left and right side pocket mounting brackets and secure to the rear of
the pocket using screws supplied with kit.
3) Insert pocket into lower section of the main bracket and secure to the lower
mounting holes of the metal support chassis using the Phillips screws
removed from the sides of the factory radio.
4)
Insert DIN sleeve (supplied with radio) from your new radio into the upper
section of the installation kit.
5)
Depress the tabs from inside the sleeves opening upward, outward, and
downward to secure sleeve to the installation kit.
6)
Install radio into sleeve and lock into place.
7)
Attach a rear support bracket (supplied with most aftermarket radios) to the
rear of the new radio and adjust as necessary to attach to the rear support
stud located on the back of the pocket using (1) small phillips screw supplied
with kit.
DIN Sleeve
Trim Ring
Optional Us
NOTES:
3 4
KIT ASSEMBLY INSTRUCTIONS
Single ISO Mount Applications
1) Prepare kit as shown under Preparation Instructions on page 1.
2) Attach left and right side pocket mounting brackets and secure to the rear of
the pocket using screws supplied with kit.
3) Insert pocket into lower section of the main bracket and secure to the lower
mounting holes of the metal support chassis using the Phillips screws
removed from the sides of the factory radio.
4) Remove metal sleeve from aftermarket radio.
5)
Insert aftermarket radio into upper location of kit and secure radio to metal chassis
radio mounting hole locations.
NOTE:
ISO trim ring (ITR-864) may be used in place of after-market radio’s trim rings.
ITR-864
(Optional Use)
NOTE:
ISO trim ring (DITR-864) must be used in place of after-market radio’s trim rings.
KIT ASSEMBLY INSTRUCTIONS
Double DIN & Double ISO Mount Applications
1) Prepare kit as shown under Preparation Instructions on page 1.
2) Cut and remove center rib from main bracket for double DIN and double
ISO applications
3) For double DIN radio applications ONLY cut and remove center rib from
ACUK864 and file edges smooth.
4) Remove metal sleeve from aftermarket radios (Double ISO applications only).
5)
Insert aftermarket radio(s) into metal chassis support frame and secure using
Phillips screws removed from the sides of the factory radio
.
6)
For Double DIN sized radios
cut and remove center rib from the DITR-864
and file the edges smooth.
CUT
CUT
CUT
Only For
Double DIN
radios
CUT
Only For
Double DIN
radios
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

PAC ACUK864 User manual

PAC
Brand
PAC
Model
ACUK864
Category
Car kits
Type
User manual
This manual is also suitable for

PAC BKACUK864 is a vehicle-specific dash kit for 2002-2006 Acura RSX models. It allows you to replace your factory radio with a single or double DIN aftermarket radio. The kit includes all the necessary hardware and instructions to make the installation process quick and easy.

With the PAC BKACUK864, you can upgrade your car's audio system with a new radio that offers more features and better sound quality. You can also add an auxiliary input to your car so you can connect your iPod, MP3 player, or other audio device.

Here are some of the features of the PAC BKACUK864:

  • Allows you to replace your factory radio with a single or double DIN aftermarket radio
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents