PAC BKMCK2000B User manual

CUSTOMER HELP LINE

USA 800-323-4329 • Canada 800-245-8777

FOR MARINE APPLICATIONS

For information about other American International automotive

accessories visit our website at:

http://www.americaninternational.net

iMCK2000

MCK2000 Mounting Kit

TECH Ver. 6/13 PRINT Ver. 6/13

1. Verify dash opening and screw holes are correct size for marine kit. If so, using

supplied gasket mount in opening. The right side panel of the kit will open to give

access to mounting holes and the left side will remove.

2. If opening and screw holes are not correct use the diagram below for a reference

to cut the opening and predrill for the mounting screws.

NOTE: Once the opening is the correct size you can use the marine kit as a template

for your screw holes.

INSTALLATION INSTRUCTIONS

DIN MOUNT INSTALLATION INSTRUCTIONS

1. Insert DIN metal-sleeve from your new radio into the radio opening

of the installation kit.

2. Depress the tabs from inside the sleeves opening upward, outward, and downward to

secure sleeve to the installation kit.

3. Slide new radio through DIN metal-Sleeve until it locks in place.

Automotive Products Division

1040 Avenida Acaso • Camarillo, CA 93012, U.S.A.

USA Sales (800) 336-6500

Canada Sales (888) 922-3006 • USA Fax (805) 388-7950

Fig A

NOT TO SCALE

This manual is also suitable for