For the first time, please turn on the stabilizer. Log into the Hohem Pro App to activate the stabilizer.
If the activation fails, it will not be enabled properly.
Booting up for the first time
Activate iSteady X & Bluetooth Connection
Long press the function
button. When it is turned
on for thefirst time, it will
enter a to-be-activated
state and the Bluetooth
indicator light will flash
“red and green” alternately.
Turn on the phone's
Bluetooth, open the
APP, and log into the
home page. Follow
the prompt at the top
and click “Connect”.
After the Bluetooth is connected,
an activation prompt box will pop
up. Click "Confirm" to complete
the activation. After that, you will
hear a prompt tone of ticking, which
means the stabilizer starts to work.
① Startup
② Connect Bluetooth
in the APP
③ Activate iSteady X
4