2. Sterling
  3. 72240106-0
72240106-0

Sterling 72240106-0, 72241100, ACCORD 72240106 Specification

  • Hello! I am an AI chatbot trained to assist you with the Sterling 72240106-0 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Features
•
Compression molded from our exclusive solid Vikrell
®
material
•
Modular 4-piece design
•
Pivot ″snap together″ installation
•
Caulkless installation
•
Convenient shelves provide generous storage
•
Durable high-gloss finish
•
Lightly pebbled bottom surface for sure footing
•
10-year consumer/3-year commercial limited warranty
•
Wall surround allows for attachment of grab bars
•
36-1/8″ (91.8 cm) x 37-1/4″ (94.6 cm) x 77″ (195.6
cm) rough-in dimensions include nailing flange
•
36″ (91.4 cm) x 36″ (91.4 cm) x 71-1/4″ (181 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ANSI Z124.1.2
•
ASTM E162
•
ASTM E662
•
CSA B45
36″ (91.4 cm) RECEPTOR AND
SURROUND W/BACKER BOARDS
72240106
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
72240106 36″ (91.4 cm) shower receptor and wall surround with backer boards ❑ 0 ❑ Other_____
Model Wall Component Description Colors/Finishes
72242100 36″ (91.4 cm) Backwall ❑ 0 ❑ Other_____
72241100 36″ (91.4 cm) Receptor ❑ 0 ❑ Other_____
72245106 Endwall set with backer boards ❑ 0 ❑ Other_____
ACCORD
®
Page 1 of 2
1092041-4-
B
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Model door maximum width door maximum
height
72240106 32-5/8″ (82.9 cm) 72″ (182.9 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for roofing nail
use.
Receptor cannot be installed without the wall surround.
10" (25.4 cm)
4" (10.2 cm)
End Wall
29-1/4"
(74.3 cm)
10-1/4" (26 cm)
36-1/8" (91.8 cm) Min
36-1/4" (92.1 cm) Max
37-1/4"
(94.6 cm)
26"
(66 cm)
8"
(20.3 cm)
10"
(25.4 cm)
10"
(25.4 cm)
16"
(40.6 cm)
4-1/2"
(11.4 cm) D.
Drain Cutout
16-3/8"
(41.6 cm)
18"
(45.7 cm)
Recommended Roofing
Nail Locations (4 total)
3-5/16"
(8.4 cm) OD
Drain Hole
54"
(137.2 cm)
35-1/4"
(89.5 cm)
3-7/8"
(9.8 cm)
7-5/8"
(19.4 cm)
6-5/8"
(16.8 cm)
77"
(195.6 cm)
36"
(91.4 cm)
71-1/4"
(181 cm)
1-1/4"
(3.2 cm)
1-1/4"
(3.2 cm)
36"
(91.4 cm)
1-5/8" (4.1 cm)
at Midpoint
Product Diagram
ACCORD
®
ACCORD
®
36″ (91.4 cm) RECEPTOR AND SURROUND W/BACKER BOARDS
Page2of2
1092041-4-
B
/