Honeywell QUANTUME IS3480 User manual

QUANTUME IS3480

Brand: Honeywell

Model: QUANTUME IS3480

Category: Engine

Type: User manual

IS3480 QuantumE

QuantumT 3580

Fusion 3780

Orbit 7120/7180

Solaris 7820

Quick Start Guide

Aller à www.honeywellaidc.com pour le français.

Vai a www.honeywellaidc.com per l'italiano.

Gehe zu www.honeywellaidc.com für Deutsch.

Ir a www.honeywellaidc.com para español.

Para Português, acesse www.honeywellaidc.com.br.

Перейти на русскоязычный сайт www.honeywellaidc.com.

Pro češtinu jdi na www.honeywellaidc.com.

Pre slovenčinu choď na www.honeywellaidc.com

日本語 : www.honeywellaidc.com をご覧ください。

如要到中国 www.honeywellaidc.com（简体）。

한글 www.honeywellaidc.com 로 이동합니다

1

Getting Started

Turn off the computer’s power before connecting

the scanner, then power up the computer once the

scanner is fully connected.

Scanner Host Ports

QuantumT 3580

Fusion 3780

IS3480 QuantumE

Orbit 7120/7180 Solaris 7820

2

Connecting the Scanner

Serial

(RS232)

Keyboard

Wedge

optional

adapter cable

Connect to

scanner’s host

port

Connect to

scanner’s host

port

Connect to

scanner’s host

port

USB

3

Recall Defaults

Scan Recall Defaults to reset all standard product

default settings.

³999998

Recall Defaults

4

Interface Selections

USB

³4164140

³999970

³416400

USB Keyboard

Emulation

Load Integrated Full

Speed USB IBM/OEM

Defaults

USB Serial Emulation

5

RS232

Keyboard Wedge

Keyboard Country

Scan a bar code to select one of the following

keyboard country templates. Refer to your

Configuration Guide for additional keyboard country

settings.

³415554

RS232

³5155143

Keyboard Wedge Emulation

³416260

United States

6

³416210

³416200

United Kingdom

Belgium

³416230

Germany/Austria

³416220

France

7

ALT Mode

Use ALT Mode when bar codes or formatting rules

include Extended ASCII data that might not have a

direct keyboard equivalent. If your bar code

contains special characters from the extended

ASCII chart, scan the Enable 3-digit ALT Mode or

Enable 4-digit ALT Mode codes below. The key

sequence based on the ASCII value would be sent

to the host (e.g., if an asterisk (*) is contained in the

bar code, the host receives ALT + 0 + 4 + 2 (3-digit).

If an “Ü” is contained in the bar code, the host

receives ALT + 0 + 2 + 2 + 0 (4-digit). You may also

se ALT Mode when no "Keyboard Country" bar

code that matches your keyboard exists.

³416250

³416240

Spain

Italy

8

Note: Scan ALT mode after scanning the

appropriate Keyboard Country code.

³116217

Enable 3-digit ALT Mode

³116716

³116706

Enable 4-digit ALT Mode

Disable 3-digit ALT Mode

Disable 4-digit ALT Mode

³116207

³116716

9

RS232 Communication Commands

³115816

RTS/CTS

Handshaking On

³115914

XON/XOFF On

³115913

ACK/NAK On

³116013

8 Data Bits

10

Power Save Modes

Scan the following bar codes to have the scanner to

enter/exit from various power save modes.

³116014

1 Stop Bit

³316045

No Parity

³319410

Blink

11

³319420

³319430

³118617

Laser Off Power Save

Laser and Motor Off

Power Save

Power Save Mode Always

³818600

Power Save Mode Never

12

Host Scanner Commands

Scan the Enable D/E Disable bar code below to

disable scanning after the scanner receives an

ASCII “D” from the host. Scanning is enabled when

the scanner receives and ASCII “E”.

³118015

³118005

Enable D/E Disable

Disable D/E Disable

13

Scan the Activate DC2 Character bar code below

initiate scanning with the receipt of a DC2 character

(^R, 124).

Scanning the Transmit Serial Number code

transmits the scanner’s serial number.

³118100

Do Not Activate

DC2 Character

³118110

Activate DC2 Character

³999969

Transmit Serial Number

14

LED Options

Scan the Laser LED Off/Scan LED Off bar code to

turn off the laser/scan LED while scanning bar

codes. The LEDs continue to illuminate for all other

functions.

³243130

³243132

Laser LED Off

Scan LED Off

15

Prefix

Scan one of the following bar codes to program

your scanner to add or remove a start of text

character, or AIM, NCR, or Nixdorf identification

characters before each bar code.

³116615

³116605

STX Prefix On

STX Prefix Off

³107915

AIM ID Prefix On

16

³107905

AIM ID Prefix Off

³107901

³107911

NCR Prefix On

NCR Prefix Off

³107917

Nixdorf Prefix On

17

Suffix

Scan one of the following bar codes to program

your scanner to add or remove a carriage return,

line feed, tab, or end of text after each bar code.

³107907

Nixdorf Prefix Off

³116613

³116603

CR Suffix On

CR Suffix Off

18

³116612

LF Suffix On

³116602

LF Suffix Off

³116610

Tab Suffix On

³116600

Tab Suffix Off

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

Honeywell QUANTUME IS3480 User manual

QUANTUME IS3480

Brand: Honeywell

Model: QUANTUME IS3480

Category: Engine

Type: User manual

Related papers

Other documents