Honeywell MS-9540 Voyager User manual

Brand: Honeywell

Model: MS-9540 Voyager

Category: Bar code readers

Type: User manual

This manual is also suitable for

Voyager 9520/40
Voyager GS9590 
Eclipse 5145
Quick Start Guide
VG-ECL-QS Rev C 
6/12
Aller à www.honeywellaidc.com pour le français.
Vai a www.honeywellaidc.com per l'italiano.
Gehe zu www.honeywellaidc.com für Deutsch.
Ir a www.honeywellaidc.com para español.
Para Português, acesse www.honeywellaidc.com.br.
Перейти на русскоязычный сайт www.honeywellaidc.com.
日本語 :  www.honeywellaidc.com をご覧ください。
如要到中国 www.honeywellaidc.com（简体）。
한글 www.honeywellaidc.com 로 이동합니다 .

Getting Started

Turn off the computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Connecting the Scanner

USB:

Serial

(RS232):

Keyboard

Wedge:

optional adapter cable

Reading Techniques

Recall Defaults

Scan Enable Factory Defaults, then Recall Defaults to reset all

standard product default settings.

Interface Selections

USB

³999998

Recall Defaults

³846600

Enable Factory Defaults

³999970

³316400

USB Keyboard

Emulation

Load Integrated Full

Speed USB IBM/OEM

Defaults

³316460

USB Serial Emulation

Keyboard Wedge

Keyboard Country

Scan a bar code to select one of the following keyboard country

templates. Refer to your Configuration Guide for additional keyboard

country settings.

³5155143

Keyboard Wedge Emulation

³416210

³416220

United Kingdom

³416230

Germany/Austria

France

³416260

United States

³416200

Belgium

³416250

Spain

³416240

Italy

ALT Mode

If your bar code contains special characters from the extended ASCII

chart, for example, an e with an accent grave (è), scan the ALT Mode

On bar code. The data is then output with the special character(s).

Note: Scan ALT mode after scanning the appropriate Keyboard

Country code.

RS232 Communication Commands

³116217

ALT Mode On

³115816

RTS/CTS

Handshaking On

³115914

XON/XOFF On

³115913

ACK/NAK On

³116013

8 Data Bits

³116014

1 Stop Bit

³316045

No Parity

Prefix

Scan one of the following bar codes to program your scanner to add

or remove a start of text character, or AIM, NCR, or Nixdorf

identification characters before each bar code.

³116615

³116605

³107905

³107901

STX Prefix On

STX Prefix Off

³107915

AIM ID Prefix On

AIM ID Prefix Off

³107911

NCR Prefix On

NCR Prefix Off

³107907

³107917

Nixdorf Prefix On

Nixdorf Prefix Off

Suffix

Scan one of the following bar codes to program your scanner to add

or remove a carriage return, line feed, tab, or end of text after each

bar code.

³116613

³116603

³116604

CR Suffix On

CR Suffix Off

³116612

LF Suffix On

³116602

LF Suffix Off

³116610

Tab Suffix On

³116600

Tab Suffix Off

³116614

ETX Suffix On

ETX Suffix Off

User Configurable Prefix/Suffix

One or two prefix or suffix characters can be added and assigned for

data transmission. Use one of the codes below with a 3 code byte

sequence that represents the desired character (see ASCII

Conversion Chart, end of document) for your prefix or suffix. (To add

additional prefix/suffix characters, refer to your Single-Line

Configuration Guide.)

Scan the Enter/Exit Programming bar code to begin. Then scan

the 3 digit decimal equivalent of the ASCII character into the

appropriate character location with the code byte bar codes (see

Code Bytes, end of document). To save, scan the Enter/Exit

Programming bar code again.

Example: To add an asterisk (*) as a prefix, scan the bar codes:

1. Enter/Exit Programming

2. Configurable Prefix #1

3. Code Byte 0

4. Code Byte 4

5. Code Byte 2

6. Enter/Exit Programming

³904500

Configurable Suffix #1

³904600

Configurable Suffix #2

³903500

Configurable Prefix #1

³903600

Configurable Prefix #2

³999999

Enter/Exit Programming

Supplements

Scan one of the bar codes below to program your scanner for 2 or 5

digit bar code supplements.

977 (2 Digit) Supplement Required: Turn on this feature when a 2

digit supplement is required for EAN-13 codes that begin with 977.

³101217

2 Digit Supplements

³101207

2 Digit Supplements Off

³101216

5 Digit Supplements

³101206

5 Digit Supplements Off

³101314

977 Supplements On

³101304

977 Supplements Off

UPC/EAN Formatting

Scan Convert UPC-A to EAN-13 and a leading zero is transmitted

before a UPC-A bar code to convert it to EAN-13.

Scan Transmit Lead Zero on UPC-E to transmit a zero before each

UPC-E bar code.

Scan Transmit UPC-A Number System to transmit the UPC-A

leading digit with the bar code data. To transmit just the data, without

the leading digit, scan Don’t Transmit UPC-A Number System.

³107514

Convert UPC-A to

EAN-13

³107504

Don’t Convert UPC-A to

EAN-13

³107513

Transmit Lead Zero on

UPC-E

³107503

Don’t Transmit Lead

Zero on UPC-E

³107511

³107501

Don’t Transmit UPC-A

Number System

Transmit UPC-A

Number System

Expand UPC-E to 12 Digits expands the UPC-E code to the 12 digit,

UPC-A format.

When Code 39 Full ASCII On is scanned, certain character pairs

within the bar code symbol will be interpreted as a single character.

For example: $V will be decoded as the ASCII character SYN, and /

C will be decoded as the ASCII character #.

³107515

Expand UPC-E to 12

Digits

³107505

Don’t Expand UPC-E to

12 Digits

³100217

Code 39 Full ASCII On

³100207

Code 39 Full ASCII Off

Check Digits

The following selections allow you to specify whether the check digit

should be transmitted at the end of the scanned UPC-A or UPC-E

data or not.

CodeGate/Manual Activation (Voyager 9520/40,

VoyagerGS 9590)

Use the following programming codes to control CodeGate button/

trigger functions. Any time CodeGate is Active, you must push the

CodeGate button (on the top of the scanner) or press the trigger to

read a bar code. Whenever CodeGate is Inactive, the CodeGate

button/trigger does not need to be pressed. Bar codes are

automatically read when they are in the scanner’s field of view.

³107517

³107507

Don’t Transmit UPC-A

Check Digits

*Transmit UPC-A

Check Digits

³107516

³107506

*Don’t Transmit UPC-E

Check Digits

Transmit UPC-E Check

Digits

³118703

³118713

CodeGate Active Out

of Stand

CodeGate Inactive Out

of Stand

Host Configurations

Scan one of the following codes, then scan the Recall Defaults

code, to program the scanner for one of the following configurations.

Miscellaneous

Minimum Symbol Length specifies the minimum number of

characters allowable for non-UPC/EAN bar codes. Scan the Enter/

Exit Programming bar code to begin. Scan Minimum Symbol

Length, then scan the minumum number of characters allowed using

code byte bar codes, below. To save, scan the Enter/Exit

Programming bar code again.

³84661280

³84660030

³84660140

Verifone® Ruby Terminal

Defaults

Gilbarco® Terminal

Defaults

Wincor Nixdorf Terminal

Defaults

³999998

Recall Defaults

³901800

Minimum Symbol Length

³999999

Enter/Exit Programming

Code Bytes

³0

³1

³3

³5

³2

³4

³6

³7

³9

³8

ASCII Conversion Chart

Dec Hex Char Dec Hex Char Dec Hex Char Dec Hex Char Dec Hex Char

000 NUL 26 1A SUB 52 34 478 4E N104 68 h

101 SOH 27 1B ESC 53 35 579 4F O105 69 i

202 STX 28 1C FS 54 36 680 50 P106 6A j

303 ETX 29 1D GS 55 37 781 51 Q107 6B k

404 EOT 30 1E RS 56 38 882 52 R108 6C l

505 ENQ 31 1F US 57 39 983 53 S109 6D m

606 ACK 32 20 58 3A :84 54 T110 6E n

707 BEL 33 21 !59 3B ;85 55 U111 6F o

808 BS 34 22 “60 3C <86 56 V112 70 p

909 HT 35 23 #61 3D =87 57 W113 71 q

10 0A LF 36 24 $62 3E >88 58 X114 72 r

11 0B VT 37 25 %63 3F ?89 59 Y115 73 s

12 0C FF 38 26 &64 40 @90 5A Z116 74 t

13 0D CR 39 27 ‘65 41 A91 5B [117 75 u

14 0E SO 40 28 (66 42 B92 5C \118 76 v

15 0F SI 41 29 )67 43 C93 5D ]119 77 w

16 10 DLE 42 2A *68 44 D94 5E ^120 78 x

17 11 DC1 43 2B +69 45 E95 5F _121 79 y

18 12 DC2 44 2C ,70 46 F96 60 ‘122 7A z

19 13 DC3 45 2D -71 47 G97 61 a123 7B {

20 14 DC4 46 2E .72 48 H98 62 b124 7C |

21 15 NAK 47 2F /73 49 l99 63 c125 7D }

22 16 SYN 48 30 074 4A J100 64 d126 7E ~

23 17 ETB 49 31 175 4B K101 65 e127 7F

24 18 CAN 50 32 276 4C L102 66 f

25 19 EM 51 33 377 4D M103 67 g

Technical Assistance

Contact information for technical support, product service, and repair can be

found at www.honeywellaidc.com.

Limited Warranty

Refer to www.honeywellaidc.com/warranty_information for your product’s

warranty information.

User Documentation

For localized versions of this document, and to download the Configuration

Guide or the Installation and User’s Guide, go to www.honeywellaidc.com.

Patents

For patent information, please refer to www.honeywellaidc.com/patents.

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in

specifications and other information contained in this document without prior

notice, and the reader should in all cases consult HII to determine whether

any such changes have been made. The information in this publication does

not represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained

herein; nor for incidental or consequential damages resulting from the

furnishing, performance, or use of this material.

This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this document may be photocopied,

reproduced, or translated into another language without the prior written

consent of HII.

Web Address: www.honeywellaidc.com

Honeywell MS-9540 Voyager User manual

Brand: Honeywell

Model: MS-9540 Voyager

Category: Bar code readers

Type: User manual

This manual is also suitable for

Download PDF

report

Honeywell MS-9540 Voyager User manual

This manual is also suitable for

Honeywell MS-9540 Voyager User manual

Related papers

Other documents