2. SMITH SYSTEM
  3. 179836

SMITH SYSTEM 179836 Assembly Instructions

  • Hello! I've reviewed the Quick Installation Guide for the Flex Desk models 01360, 01361, 01362, 01370, 01371, 01380, and 01381. This document provides instructions on how to assemble your desk, including steps for attaching the modesty panel and adjusting the leg height. I'm ready to answer any questions you have about the assembly process or the features of your Flex Desk.
  • What is the first step of the table assembly process?
    What tool is used to adjust the height of the legs?
    Do you need to fully tighten the connector bolts during the initial stage of assembly?
#10 Wood Screw (12)
Y-Leg (2)
Table top (1)
3/8"-16 Dog Nut Screw (4)
Allen Wrench (2)
Flex Desk Quick Installation Guide
model 01360, 01361, 01362, 01370, 01371, 01380, 01381
Form# 179836
Required for Installation
Step 1 Place table top on a smooth, clean
surface with the bottom facing up.
Step 2 Loosely attach panel to legs using
supplied connector bolts. LEAVE
FINGER TIGHT (Diagram 2)
Step 3 Align frame assembly with predrilled
holes in top and use supplied #10
screws to loosely attach.
(Diagram 1)
Step 4 Go back to assembly and completely
tighten connector bolts. Once done
completely tighten frame assemly to
table.
Step 5 Using supplied Allen wrench adjust
height of legs. (Diagram 3) Carefully
tip unit over onto it’s legs. Unit is
now ready for use.
Instructions
Diagram #1
Diagram #3
Connector Bolt (4)
Diagram #2Diagram #2
MODESTY PANEL (1)
Rev. 08/2010
/