ACCESSORY INSTALL
INSTRUCTIONS
TION
Page
2
of
3
Installation Instructions for the 130 Super Sport
Issue Date
10/23/2018
PROCEDURE NO.
8.
PROCEDURE
8.1.
Install port coaming cleat.
8.1.2.
Starting from the bench seat support detail,
measure 21.5” FWD. make a vertical mark
with pencil.
8.1.3.
Measure up from floor 10.75” at vertical pencil
mark. Make a horizontal pencil mark. Place the
coaming cleat AFT upper corner at pencil mark
intersection. Making sure cleat is level, mark
cleat fastener holes. Drill holes and secure
cleat with screws.