STAINLESS STEEL 2-
SLICE TOASTER
Instruction Manual
MODEL:
PL840
Due to ongoing product improvements, specifications and accessories may
change without notice. Actual product may differ slightly to that depicted.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 1
CONTENTS
02 Welcome
03 Package Contents
03 Technical Specifications
04 Important Safety instructions
06 Assembly and parts
07 Instructions
09 Cleaning and Maintenance
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 2
WELCOME
Congratulations on choosing to buy a Sheffield product.
All products brought to you by Sheffield are manufactured
to the highest standards of performance and safety, and, as
part of our philosophy of customer service and satisfaction,
are backed by our comprehensive 12 Month warranty.
We hope you will enjoy using your purchase for many years
to come.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 3
PACKAGE CONTENTS
1 x 2-Slice Toaster
1 x Instruction Manual
1 x Warranty Card
Confirm all parts before disposing of carton. Safely dispose
of all plastic bags and other packaging components. They
may be potentially dangerous to children.
TECHNICAL SPECIFICATION
Model: PL840
Rated voltage: 220-240V~50Hz
Power: 900W
Protection class: I
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 4
IMPORTANT SAFEGUARDS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Carefully read this manual before using this appliance.
Ensure that you know how the appliance functions and how to operate it.
Maintain the appliance in accordance with the instructions to ensure that it
functions properly.
Keep this manual with the appliance. If the appliance is to be used by a third
party, this instruction manual must be supplied with it.
The safety instructions do not by themselves eliminate any danger completely and
proper accident prevention measures must always be used.
No liability can be accepted for any damage caused by non-compliance with these
instructions or any other improper use or mishandling.
Do not use this appliance if it has been dropped or damaged in any way, or if the
supply cord is damaged.
Intended Use
Intended Purpose: Do not use the appliance for anything other than its intended
purpose, and only use it as described in this manual
Indoor domestic use only: this appliance is intended for indoor domestic use only.
Do not use it outdoors. Do not use in moving vehicles or boats.
This appliance is designed exclusively for private, domestic use for toasting foods
for human consumption; it is not suitable for commercial or industrial use.
Only use the appliance on a stable, level surface.
Accessories: Do not use any accessories with the appliance that are not supplied
or specifically recommended.
When using electric appliances always observe safety regulations where applicable to
reduce the risk of fire, electric shock and personal injury.
Always check that the power supply corresponds to the voltage on the rating plate.
Supply Cord and Plug
Always unplug from mains supply when not in use. Do not abuse or damage the power
cord. If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard. Do not let the
supply cord touch hot surfaces.
When cleaning or putting the appliance away, switch off the appliance and always pull
out the plug from the socket (pull on the plug, not the cable)
Earth Safety
This appliance must be earthed. Only connect to a suitably earthed 220-240V ~ 50Hz
supply socket.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 5
Use and Environment
Do not leave unattended while in use.
Do not use outdoors. Do not immerse cables, plugs or appliance in water or any
other liquid.
Do not use directly below a socket outlet.
Do not let the cord hang over the edge of any table or bench top.
The temperature of accessible surfaces may be high when the appliance is
operating. Do not touch hot surfaces. Use handles or knobs.
Do not attempt to dislodge food when toaster is plugged in.
Never re-toast the same piece of bread at the same setting. If you wish to re-toast
the bread, set the toasting control dial to a lower setting and do not leave the
toaster unattended. Failure to do so may result in a fire hazard.
Do not place the cables or any other object over the bread openings while the
toaster is in operation.
The toasting lever must be in the “UP” position before the appliance is plugged in.
Do not insert metal objects or other items into the toaster as this may cause an
electric shock or lead to a fire.
CAUTION: This appliance is not intended to be operated by means of an external
timer or separate remote-control system.
Do not use this appliance for any purpose other than those stated in this manual.
NOTE: The bread may burn, therefore do not use the toaster near or below
combustible material, such as curtains. The toaster should be attended when in use.
Supervision
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved
Cleaning and user maintenance shall not be made by children without supervision.
Children should be supervised to ensure that they do not play with the appliance.
Damaged or Dropped
Always inspect your appliance before use. Check parts are correctly attached. Do not
use this appliance if it has been damaged, dropped, left outdoors or dropped in water.
Return it to an authorised service dealer for examination and repair.
Fire Risk
The temperature of accessible surfaces may be high when the appliance is operating.
The bread may burn, therefore do not use the toaster near or below combustible
material, such as curtains. The toaster should be attended when in use.
Oversize foods, metal foil packages, or utensils must not be inserted in a toaster as
they may involve a risk of fire or electric shock.
The heating element surface is subject to residual heat after use
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 6
ASSEMBLY AND PARTS
A. Loading leaver
D. Cancel/Stop button
B. Defrost button
E. Reheat button
C. Browning control
F. Removable crumb tray
IMPORTANT SAFEGUARDS:
CAUTION! HOT SURFACE!
The temperature of accessible surfaces may be high when the appliance is
operating
Before First Use
The first time you use the toaster, you should do so without bread. This will pre-heat
the new element and burn off any dust collected during the storage process. If your
toaster is not plugged in and switched on, the control lever will not lock in the down
position.
.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 7
INSTRUCTIONS
NOTICE:
If the bread in your toaster becomes jammed disconnect your toaster at the
socket, allow it to cool, and then remove the bread.
When not in use, switch your toaster off at the mains and remove the plug from
the socket.
DO NOT WRAP THE CABLE AROUND THE MAIN BODY OF THE APPLIANCE
DURING OR AFTER USE.
Using Your Sheffield Toaster
1. Make sure crumb tray is in place and bread carriage is in the up position.
2. Set up toaster on flat, firm countertop surface away from the edge and at least 3
inches away from wall or rear of counter.
3. Unwind power cord and plug power cord into nearby outlet.
4. Connect to a suitable 220-240V ~ 50Hz power supply. This appliance must be
earthed.
5. Select the desired level of browning on the browning control marked 1 to 6. The
setting required will vary according to the moisture content and thickness of
bread. For best results ensure that the bread slices are of even thickness,
freshness and size. Remember that stale bread toasts more rapidly than fresh and
thin bread toasts quicker than thick. See additional points for more information.
6. After selecting the desired browning level, place your bread in the bread slots and
depress the bread carriage lever downwards until it locks. Note: The bread
carriage lever will not stay down unless the toaster is plugged in and the wall
switch is on.
7. The indicator light for the stop button comes on automatically when the toaster is
activated.
8. After the set degree of brownness has been reached the bread will pop-up
automatically, ready for removal from the slots. The bread carriage lever will have
returned to its upper position and the heating element will have switched off,
ready for the next toasting. If the first slices are not dark enough turn the
browning control to a higher setting.
9. Allow the unit to cool down before you put it away.
Using the Cancel Button
If you wish to interrupt the toasting process, press the cancel button.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 8
Using the Defrost Button
To toast frozen bread, do not adjust the browning control, place the bread
normally in the bread slot, depress the bread carriage lever and press the frozen
bread button
The light next to the button will illuminate and the toaster will automatically toast
for an extended period.
Using the Re-heat Button
If your toast has popped up and gone cold, the toaster offers a re-heat facility. To use,
depress the bread carriage lever and press the re-heat button immediately. The light
next to the button will illuminate and the toaster will operate for a short period re-
heating the bread.
Crumb Tray
Crumbs will accumulate in the crumb tray and could catch fire if not emptied
periodically. When the toaster has cooled down completely, tap the sides of the case
lightly to dislodge any crumbs lodged in the toasting chamber and pull out the crumb
tray .Empty the tray and replace it.
NOTE: Never operate the toaster without the crumb tray fitted.
Additional Points
In order to achieve uniform browning, we recommend you wait a minimum of 30
seconds between each toasting, so that the control can automatically be reset.
If toasting one slice only, you may need to adjust the browning control to a
slightly lower setting. Note you will also notice a slight variation in toast colour on
one side of a single slice.
Stale bread toasts more rapidly than fresh bread. The browning control should be
set at a lower setting than usual.
All sorts of bread can be used as well as muffins, crumpets etc. Slices should not
however be so thick as to cause burning or jamming within the bread slot.
When toasting 2 slices it is recommended they are of equal size and freshness.
Allow the toaster to cool fully before putting away.
AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page 9
CLEANING and MAINTENANCE
This appliance requires little maintenance. It contains no user-serviceable parts. Any
servicing requiring disassembly other than cleaning must be performed by a qualified
appliance repair technician.
Before Cleaning
When not in use or before cleaning, always disconnect the appliance from the
mains supply.
NEVER put metal objects or your fingers into the toasting slots. If an item does
become jammed, switch toaster off and unplug from outlet immediately. Once
cooled, turn toaster upside down and gently shake to remove the lodged item.
After use and before cleaning, always disconnect the appliance from the mains
supply, remove the plug from the wall socket and wait for the toaster to cool.
Care and Cleaning
CAUTION: Never immerse the toaster/plug/cord in water or any other fluid, Do not
rinse it under the tap. Use only a damp cloth to clean the toaster.
1. Always unplug the toaster from electrical outlet and allow it to fully cool before
cleaning.
2. Do not use abrasive cleansers. Simply wipe the exterior with a clean damp cloth
and dry thoroughly. Apply any cleaning agent to cloth, not directly onto the
toaster.
3. To remove crumbs slide out the crumb tray and discard crumbs. Wipe clean and
replace. Never operate the toaster without crumb tray in place.
4. To remove any pieces of bread remaining in the toaster, turn the toaster upside
down and shake gently. Never insert any hard or sharp instruments into the slots
as this could damage the toaster and cause a safety hazard.
5. Never wrap the cord around the sides of the toaster. Use the cord storage cleats
on the underside of the toaster.
CAUTION:
Do not touch hot surfaces. Use handles or knobs. Surfaces on the top of the
toaster become extremely hot.
Always unplug appliance from outlet when not in use and before cleaning. Allow to
cool before cleaning and handling.
Store in a Safe Place
When not in use store your appliance and all its accessories and instruction manual in
a safe and dry place
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Germanica GETO18CM User manual
-
De'Longhi DELONGHI FLORA KETTLE BEIGE User manual
-
Svan SVTO06575V Owner's manual
-
DeLonghi CTJ4003BK User manual
-
Cookworks XB8133 User manual
-
Sytech SYTS14BLANCO Owner's manual
-
-
-
-
DeLonghi CTA4003R User manual
