2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Power conditioning
  5. Power supply units
  6. American Standard
  7. 0373.027

American Standard 0373.027, 0373.050, 0373.950, Penlyn Wall-Hung Lavatory 0373.050 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard 0373.027 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
M25
© 2008 AS America Inc.
Revised 8/05
To Be Specied:
❏ Color: ❏ White
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
❏ Nipple:
❏ Concealed Arms Support (by others):
* See faucet section for additional models available
PENLYN™
WALL-HUNG LAVATORY
VITREOUS CHINA
PENLYN™ WALL-HUNG LAVATORY
• Wall-hung sink
• Vitreous china
• Front overow
• Integral back splash
• Faucet ledge
Shown with 4801.862 Amarilis Heritage
faucet with Triune Cross handles
(not included)
Faucet holes on 102mm (4") centers:
❏ 0373.027 For wall hanger (included)
❏ 0373.050 For concealed arms support
❏ 0373.950 For concealed arms support
• Less overow
Nominal Dimensions:
457 x 403mm
(18" x 15-7/8")
Bowl sizes:
340mm (13-3/8") wide
216mm (8-1/2") front to back
127mm (5") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP
ARE SUGGESTED.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
203 mm
(8)
403 mm
(15-7/8)
88 mm
(3-7/16)
178 mm
(7)
457 mm
(18)
C/L
267 mm
(10-1/2)
102 mm
(4)
102 mm
(4)
95 mm
(3-3/4)
3 mm
(1/8)
178 mm
(7)
203 mm
(8)
HOLES FOR ANCHOR
SCREWS IN BACK DRAPERY
787 mm
(31)
*
502 mm
(19-3/4)
*
460 mm
(18-1/8)
SUPPLIES AS REQUIRED
1-1/4 O.D. TAILPIECE
1-1/4 O.D. WASTE
FINISHED FLOOR
175 mm
(6-7/8)
HANGER
FINISHED WALL
C/L OF HANGER
ANCHORING SLOTS
381 mm
(15)
54mm (2-1/8) DIA.
HOLES FOR
CONCEALED ARMS
/