ZURN INDUSTRIES, LLC.
♦♦
♦♦
♦
COMMERCIAL BRASS OPERATION
♦♦
♦♦
♦
5900 ELWIN BUCHANAN DRIVE
♦♦
♦♦
♦
SANFORD NC 27330
Phone: 1-800-997-3876
♦♦
♦♦
♦
Fax: 919-775-3541
♦♦
♦♦
♦
World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED
♦♦
♦♦
♦
3544 Nashua Drive
♦♦
♦♦
♦
Mississauga, Ontario L4V1L2
♦♦
♦♦
♦
Phone: 905-405-8272 Fax: 905-405-1292
REV. C DWG. NO. 80598 DATE: 5/3/10 PRODUCT NO. Z5350
These dimensions and specifications are subject to change without
notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/
CSA B45 requirements.
Z5350
19” x 17” Wall Hung Lavatory
Z5350 Series
• 19" [483 mm] x 17" [432 mm]
• Vitreous china
• Faucet holes for single, 4", or 8" centers
• Wall hung lavatory provided with wall hanger
• Front overflow
• Waste: 1-1/4" O.D.
• Shipping Weight: 28 lbs.
TAG
Z5350 Series
See Zurn One Systems for suggested packages.
Meets the American Disabilities Guidelines and ANSI
A117.1 requirements when lavatory is installed 34”
[864mm] from finished floor.
This space is for Architectural/engineering Approval
Recommended Trim:
Z8743-PC Grid Strainer
Z8700 Series P-Trap
Z8800 Series Top with Flexible Supplies
Z8946-1-NT ADA Trap, Stop, and Supply
Protectors
Optional Trim:
Z8746-PC ADA Grid Strainer
Z8946-3-NT ADA Trap, Stop, and Supply
Protectors for Offset Grid Strainers
Engineering Specification:
Z5351 19" x 17" vitreous china wall hung
lavatory with single faucet hole. Provided with
hanger plate.
Z5354 19" x 17" vitreous china wall hung
lavatory with 4" center faucet holes. Provided
with hanger plate.
Z5358 19" x 17" vitreous china wall hung
lavatory with 8" center faucet holes. Provided
with hanger plate.
ZURN INDUSTRIES, LLC.
♦♦
♦♦
♦
COMMERCIAL BRASS OPERATION
♦♦
♦♦
♦
5900 ELWIN BUCHANAN DRIVE
♦♦
♦♦
♦
SANFORD NC 27330
Phone: 1-800-997-3876
♦♦
♦♦
♦
Fax: 919-775-3541
♦♦
♦♦
♦
World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED
♦♦
♦♦
♦
3544 Nashua Drive
♦♦
♦♦
♦
Mississauga, Ontario L4V1L2
♦♦
♦♦
♦
Phone: 905-405-8272 Fax: 905-405-1292
REV. C DWG. NO. 80598 DATE: 5/3/10 PRODUCT NO. Z5350
Z5350
19” x 17” Wall Hung Lavatory
Rough-In
TAG
These dimensions and specifications are subject to change without
notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/
CSA B45 requirements.
Rough-in dimensions for Z5350 Series
• Z5351 Lavatory with single hole faucet
• Z5354 Lavatory with 4" center faucet holes
• Z5358 Lavatory with 8" center faucet holes
AVAT O R I E S
Meets the American Disabilities Guidelines and ANSI
A117.1 requirements when lavatory is installed 34”
[864mm] from finished floor.
5
1
2
[140]
7 [178]
19
1
2
[495]
10
3
4
[273]
15
1
4
[387]
4 [102]
17
1
8
[435]
31 [787]
34 [864] (ADA)
8 [203]
10 [254]
2 [51]
2
1
8
[54]
8 [203]
FINISHED
FLOOR
FINISHED
WALL
Z1 BRACKET
1
1
8
[29]
7
3
4
[197]
4 [102]
1
8
[3]
2X SCALE
/