Zurn Plumbing Products Group Commercial Brass and Fixtures Operation
2640 South Work Street · Falconer, NY 14733 · Phone: 716-665-1132 · Fax: 716-665-1135 · www.zurn.com
REV. A DWG. NO. 82559 DATE: 7/16/10 C.N. NO. 111395 PRODUCT NO. Z5360
Z5360 Series
• 20" [508 mm] x 18" [457 mm]
• Vitreous china
• 4” high back splash
• Faucet holes for single, 4", or 8" centers
• Wall hung lavatory provided with wall
hanger or for use with concealed arm
carrier systems
• Front overflow
• Waste: 1-1/4" O.D.
• Depth: 5-3/4"
• Shipping weight: 42 lbs.
TAG
Meets the American Disabilities Guidelines and ANSI
A117.1 requirements when lavatory is installed 34”
[864mm] from finished floor.
Z5361 20" x 18" vitreous china wall
hung lavatory with single faucet hole.
Provided with hanger plate and holes for
concealed arm carrier systems.
Z5364 20" x 18" vitreous china wall
hung lavatory with 4" center faucet holes.
Provided with hanger plate and holes for
concealed arm carrier systems.
Z5368 20" x 18" vitreous china wall
hung lavatory with 8" center faucet holes.
Provided with hanger plate and holes for
concealed arm carrier systems.
These dimensions and specifications are subject to change without
notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2-2003 and
CAN/CSA B45 requirements.
Z5360 Series
See Zurn One Systems for suggested packages.
This space is for Architectural/engineering Approval
Engineering Specification:
Z5360
20” x 18” High Back
Wall Hung Lavatory
Suffix Options:
___ -PED Vitreous China Half Pedestal.
Recommended Trim:
Z8743-PC Grid Strainer.
Z8700 Series P-Trap.
Z8800 Series Stop with Flexible Supplies.
Z8946-1-NT ADA Trap, Stop, and Supply
Protectors.
Optional Trim:
Z8746-PC ADA Grid Strainer.
Z8946-3-NT ADA Trap, Stop, and Supply
Protectors for Offset Grid Strainers.
Zurn Plumbing Products Group Commercial Brass and Fixtures Operation
2640 South Work Street · Falconer, NY 14733 · Phone: 716-665-1132 · Fax: 716-665-1135 · www.zurn.com
REV. A DWG. NO. 82559 DATE: 7/16/10 C.N. NO. 111395 PRODUCT NO. Z5360
TAG
Meets the American Disabilities Guidelines and ANSI
A117.1 requirements when lavatory is installed 34”
[864mm] from finished floor.
These dimensions and specifications are subject to change without
notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2-2003 and
CAN/CSA B45 requirements.
Rough-in dimensions for Z5360 Series
• Z5361 Lavatory with single faucet hole
• Z5364 Lavatory with 4" center faucet holes
• Z5368 Lavatory with 8" center faucet holes
Note: Rough-in for concealed arm carrier, see Zurn Z1231
Rough-in sheet.
14
1
2
[368]
(Pop-Up Drain)
12
3
4
[324]
10 [254]
4 [103]
18
1
4
[464]
8 [203]
4 [102]
21
1
2
[546]
16
1
2
[418]
20 [508]
7
1
2
[190]
3
1
8
[79]
5
1
4
[133]
3
1
4
[83]
5
1
4
[133]
10
1
4
[260]
18
1
4
[464]
9 [229] MIN.
6 [152]
MAX.
8 [203]
MIN.
Z1 BRACKET
1
1
8
[29]
7
3
4
[197]
4 [102]
1
8
[3]
2X SCALE
7
1
2
[190]
ADA
CLEARANCE
17 [432]
1
1
2
[37]
33
3
8
[848]
32
1
2
[827]
34 [864] (ADA)
31 [787]
8 [203]
27 [686]
MIN.
FINISHED
FLOOR
Z5360
20” x 18” High Back
Wall Hung Lavatory
Rough-In
/