American Standard 0124.024.020 User manual

Brand: American Standard

Model: 0124.024.020

Type: User manual

This manual is also suitable for

M26

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver

❏ Faucet*:

❏ Faucet Finish:

❏ Supplies:

❏ 1-1/4" Trap:

❏ Nipple:

❏ Concealed Arms Support (by others):

* See faucet section for additional models available

COMRADE™

WALL-HUNG LAVATORY

VITREOUS CHINA

COMRADE™ WALL-HUNG LAVATORY

• Wall-hung sink

• Vitreous china

• Rear overow

• Soap depression

• Faucet ledge (faucet not included)

❏ 0124.024 With wall hanger (Illustrated)

Faucet holes on 102mm (4") centers

❏ 0124.131 For concealed arms support

Faucet holes on 102mm (4") centers

Nominal Dimensions:

508 x 464mm

(20" x 18-1/4")

Bowl sizes:

381mm (15") wide

276mm (10-7/8") front to back

159mm (6-1/4") deep

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.2 for Vitreous China Fixtures

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-

LINES AND ANSI A117.1 ACCESSIBLE AND USABLE

BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Top of front rim mounted 864mm (34") from finished floor.

NOTES:

DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP

ARE SUGGESTED.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of xtures are nominal and may vary within

the range of tolerances established by ANSI Standard A112.19.2. These

measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided pages.

Revised 8/05

FINISHED

WALL

102mm

(4)

FINISHED

FLOOR

POP-UP WASTE

OUTLET 1-1/4 O.D.

DRAIN PLUG WASTE

OUTLET 1-1/4 O.D.

203mm

(8)

SUPPLIES

AS REQ'D.

203mm

(8)

508mm

(20)

64mm

(2-1/2)

171mm

(6-3/4)

464mm

(18-1/4)

267mm

(10-1/2)

64mm

(2-1/2)

38mm

(1-1/2)

108mm

(4-1/4)

349mm

(13-3/4)

11mm (7/16) DIA.

ANCHOR SCREW

HOLES

C/L

286mm

(11-1/4)

235mm

(9-1/4)

76mm

(3)

8mm x 27mm

(5/16 x 1-1/16) SLOTS

S-9 HANGER

787mm (31)

864mm (34)

419 mm

(16-1/2)

54mm (2-1/8) DIA.

HOLES FOR

CONCEALED ARMS

BARRIER FREE

American Standard 0124.024.020 User manual

Brand: American Standard

Model: 0124.024.020

Type: User manual

This manual is also suitable for

Download PDF

report

American Standard 0124.024.020 User manual

This manual is also suitable for

American Standard 0124.024.020 User manual

Related papers

Other documents