2. York
  3. VRF Ducted High Static Indoor Unit
VRF Ducted High Static Indoor Unit

York VRF Ducted High Static Indoor Unit Installation guide

  • Hello! I am an AI chatbot trained to assist you with the York VRF Ducted High Static Indoor Unit Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation Manual for Connector Cable to Indoor Unit
Model PCC-CN1925-H
No. Name Qty.
1 Connector Cable 1
2 Cable Band (for securing the cable) 2
1. Applicable Unit
This connector cable is used for connection between PSC-5RA connector (CN7) and indoor unit PCB
connector (CN1925) for auxiliary heater control.
2. Contents of Connector Cable
3. How to Use
Connect the connector cable as shown below.
Secure the excess cable using the cable band (accessory).
During installation, refer also to the “Installation and Maintenance Manual” for connecting indoor unit.
Wired Controller
1
2
3
4
CN1925
PCB1
Indoor Unit
PCB1:
Pins 3 and 4 of CN1925
1
2
3
4
1
2
3
Connector Cable
(PCC-CN1925-H)
1
2
3
CN7
7
8
9
TB2
Relay and 3 Pin Connector Kit
(PSC-5RA)
Installer
’s Responsibility
X1
X2
X1
X2
© 2018 Johnson Controls, Inc.
Code No. LIT-12013126
Issued August 2018
P5417082
/