P O R T A B L E D V D P L A Y E R
QUICK START GUIDE
C7PDVD10
Thank you for purchasing your new Currys Essentials
Portable DVD Player.
Please follow this quick start guide for a successful rst
time set up.
We recommend that you spend some time reading this
instruction manual in order that you fully understand
all the operational features it oers.
Read all the safety instructions carefully before use and
keep this instruction manual for future reference.
Well done,
your new DVD player is now ready to use.
You will nd that there are many exciting features available. To get to know all these features, please take some time to
read the instruction manual provided with your DVD player.
(P.N.:1601-196H53-02R)
Step 1Step 1
Unpacking
Step 2Step 2
Operating Your Remote Control
Step 3Step 3
Power Supply
Step 4Step 4
Connections
Step 5Step 5
Basic Operation
Tip:Tip:
Playing a Disc
1. Make sure your unit is either plugged into the power socket or the
battery is fully charged. Switch the ON/OFF button to ON to turn
your DVD player on.
2. Open and adjust the screen angle.
3. Press the button on the front panel to open the disc tray. Put the
disc (labelled side upwards) into the disc tray.
4. Hold the disc by its sides and carefully place onto the spindle with the
label side facing up. Gently push the disc down until you hear a
“click”.
5. Close the disc door. It takes a
short while for your unit to
load the disc. After loading,
the unit will automatically
display the main menu of
the DVD or start playing the
DVD. If the unit does not
automatically start playing
the DVD, press the
button.
Remove all packaging from the unit. Retain the packaging. If you
dispose of it please do so according to any local regulations.
Using the Mains Adapter
(for indoor use)
Connecting a TV and Using Earphones
Using the Car Power Adapter
(for in-car use)
1. Press and lift the back cover up to open the battery
compartment of the remote control.
2. Insert two AAA size batteries.
3. Close the battery compartment cover.
DVD Player
Instruction
Manual
Quick Start
Guide
SD/MS/MMC
IR
Remote Control Mains Adapter
Car Power
Adapter
Install the batteries correctly by following the polarity
(+ and -) indications in the battery compartment.
Do not connect the TV and the DVD player to the mains
supply until you have completed all the connections.
POWER
AV OUT ON OFF DC IN 9-12V
Mains Adapter (included)
Right Side of DVD Player
To Mains
Socket
To DC IN 9V-12V
Socket
Car Power Adapter (included)
Right Side of DVD Player
To Cigarette
Lighter Socket
To DC IN 9V-12V
Socket
POWER
AV OUT ON OFF DC IN 9-12V
Right Side of DVD Player
To AV OUT SocketsTo Earphone Socket
Audio / Video Cable
(not included)
Headphones /
Earphones
(not included)
TV
POWER
AV OUT ON OFF DC IN 9-12V
White Red Yellow
1. Switch the ON/OFF button to ON on the side panel to turn the
DVD player on.
2. The DVD logo (start-up picture) will appear on the screen.
3. After use, switch the ON/OFF button to OFF on the side panel
to turn the DVD player o.
POWER
AV OUT ON OFF DC IN 9-12V
Right Side of DVD Player
ON OFF
SD/MS/MMC
IR
OPEN
P OR TA BL E DV D PL AY ER
QU IC K ST ART G UI DE
C7 PD VD 10
Thank you
for purchasing your new Currys Essentials
Portable DVD Player.
Please follow this quick start guide for a successful rst
time set up.
We recommend that you spend some time reading this
instruction manual in order that you fully understand
all the operational features it oers.
Read all the safety instructions carefully before use and
keep this instruction manual for future reference.
C7PDVD10_QSG_110218.pdf 1 2/18/11 3:35 PM