Currys Essentials C1DVD10 Quick start guide

Brand: Currys Essentials

Model: C1DVD10

Type: Quick start guide

Currys Essentials C1DVD10: Experience seamless entertainment with this versatile DVD player. Connect it to your TV via the provided AV cable and enjoy your favorite movies and shows. The player supports a wide range of disc formats, including DVD, CD, and MP3, ensuring compatibility with your existing collection. It also features basic playback controls, allowing you to play, pause, stop, and navigate through your media with ease.

Connecting to a TV with AV Cable

Unpacking

Operating Your Remote Control

Connecting to the Mains Socket

Basic Operation

COMPACT DVD PLAYER

QUICK START GUIDE

C1DVD10

Remove all packaging from the DVD player. Retain the packaging. If you

dispose of it please do so according to any local regulations.

Install the batteries correctly by following the polarity (+ and -)

indications in the battery compartment.

When connecting any external AV device or TV, do not connect

the mains cable to the mains socket until all other connections

are complete.

DVD Player AV CableRemote Control /

AAA Batteries x 2

(P.N.: C1005)

1. After all connection are properly completed, connect the mains cable

into the mains socket. Never make or change any connections when the

DVD player are connected to the mains socket.

2. Press the button on the DVD player or the STANDBY button on the

remote control to turn the DVD player on.

3. When the DVD player is power on and there is no disc in it, the display

panel will show “No Disc” to indicate there is no disc in the DVD Player.

1. Use the supplied AV cable to connect the DVD player’s AUDIO(L/R) /

VIDEO sockets to a TV’s composite audio/video input sockets.

(Video = yellow, Audio Left = white, and Audio Right = red)

2. Turn the DVD player and your TV on.

3. Adjust the input source of your TV to receive AV signal from the DVD

player. Please refer to the instruction manual of your TV for details.

Congratulations on the purchase of your new Currys Essentials

DVD Player.

Your new DVD Player incorporates the latest technology to enhance your

viewing experience. We would suggest that you allow about 20 mins for

initial setup.

Please follow this guide for a successful rst time installation.

Well done, your new DVD player is now ready to use.

You will nd that there are many exciting features available. To get to

know all these features, please take some time to read the instruction

manual provided with your DVD player.

Instruction Manual Quick Start Guide

1. Press and lift the back cover up to open the battery compartment of the

remote control.

2. Insert two AAA size batteries. Close the battery compartment cover.

Television

AV Cable

(included)

White

Red

Yellow

To mains socket

Press the STANDBY button to turn on the TV and select the video input

connected to the DVD player.

Switch on the related system power if the DVD player has been connected

to amplier equipment etc.

Start Up

Press the OPEN/CLOSE button to open the disc tray, place a disc into the

disc tray with the label facing up.

Press the OPEN/CLOSE button to close the disc tray, the playback will

automatically start.

Playing a Disc

100-240V~

50/60Hz

100-240V~

50/60Hz

Currys Essentials C1DVD10 Quick start guide

Currys Essentials C1DVD10 Quick start guide

Currys Essentials C1DVD10 Quick start guide

Related papers

Other documents