2. RAMPAGE PRODUCTS
  3. 8620

RAMPAGE PRODUCTS 8620 Installation guide

  • Hello! I've reviewed the installation instructions for the Rampage Products Perma Shine Polished Stainless and Black Powder Coated Front DT Bumper with Hoop, specifically models 8420-8620 and 76-06. This document covers the steps to remove the existing bumper, install the new one, and includes the torque specifications for the bolts. I am ready to answer your questions about this product.
  • How many Torx bolts should I remove from front Bumper assembly?
    what is the next step after removing Torx bolts
    What should be the value of the torque when you replace Torx bolts?
Installation Instructions
Perma Shine Polished Stainless and Black Powder Coated
Front DT Bumper with Hoop
Part No. 8420-8620 76-06 Front Double Tube Bumper with Hoop
CJ7/Wrangler
Installation:
1) Remove Torx bolts from front Bumper assembly. 2 located on each frame
member on top of the Bumper.
2) Place Euroguard on top of the bumper and locate the holes over existing holes in
the frame.
3) Replace Torx bolts tighten to 45lbs torque
Rampage Products
9225 Stellar Court Unit C, Corona, CA 92883-4919, U.S.A.
Phone: (951) 277-4949 Fax: (951) 277-2295 e-mail: [email protected]
www.rampageproducts.net
Made in China
/