© 2023
Step 1 of 3
Order #XXXXX
Completed Assembly
1
2
3A
3B
4A
4B
5
Item
1
2
3A,3B
4A,4B
5
Qty.
2
2
2,2
2,2
2
Description
88”h CEI110 Vertical Extrusion
88”h CEI110 Vertical Extrusion
54”w CEI110 Horizontal Extrusion
54”w CEI110 Horizontal Extrusion
84.353”h Z140 Vertical Extrusion
Steps:
1) Connect horizontals [3A to 3B] and [4A to 4B].
See CEI-110 Straight Connection detail.
2) Attach horizontal assemblies [3A/3B] and [4A/4B] between verticals [1] and [2].
See CEI-110 Corner Connection detail.
3) Attach standoffs to vertical [5] then attach [5] between horizontal assemblies.
4) Connect lighting cords and attach transformers.
See Light to Light Connection & Light to Transformer Connection details.
Repeat steps 1 through 4 for other frame assembly.
CEI-110 Straight Connection
1. Insert TSRV4 Bracket into center groove &
V4 Connector into front groove of extrusion.
2. Slide Connecting extrusion over exposed
end of bracket & connector.
3. Use Set Screws to secure extrusions.
TSRV4
Bracket
(2 pieces)
V4
*
Set
Screws
CEI-110 Corner Connection
*
TSRV2
Bracket
(2 pieces)
A1
Set
Screws
1) Insert TSRV2 and A1 brackets
into grooves of extrusion.
2) Slide connecting extrusion over
exposed ends of brackets.
3) Use Set screws to secure
extrusions.
*
*
*
*
*
*
Power
Break
Power
Break
QTY. 2
Standoffs
++
+
-
-
-
Lights
Male
Male
Female
Female
to power Transformer
144W / 6A / 24V
Light to Light Connection
Light to Transformer Connection
Maximum of 14 lights per transformer.
Backwall Assembly